LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: bhelgaas@google.com, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] PCI/PM: Skip link training delay for S3 resume
Date: Thu, 12 Mar 2020 12:08:44 +0200	[thread overview]
Message-ID: <20200312100844.GR2540@lahna.fi.intel.com> (raw)
In-Reply-To: <ABD5242B-E118-4811-AA8A-DF7C2A3B2E8B@canonical.com>

On Thu, Mar 12, 2020 at 05:45:32PM +0800, Kai-Heng Feng wrote:
> 
> 
> > On Mar 12, 2020, at 16:04, Mika Westerberg <mika.westerberg@linux.intel.com> wrote:
> > 
> > On Thu, Mar 12, 2020 at 12:23:46PM +0800, Kai-Heng Feng wrote:
> >> Hi,
> >> 
> >>> On Mar 11, 2020, at 18:28, Mika Westerberg <mika.westerberg@linux.intel.com> wrote:
> >>> 
> >>> Hi,
> >>> 
> >>> On Wed, Mar 11, 2020 at 12:52:49PM +0800, Kai-Heng Feng wrote:
> >>>> Commit ad9001f2f411 ("PCI/PM: Add missing link delays required by the
> >>>> PCIe spec") added a 1100ms delay on resume for bridges that don't
> >>>> support Link Active Reporting.
> >>>> 
> >>>> The commit also states that the delay can be skipped for S3, as the
> >>>> firmware should already handled the case for us.
> >>> 
> >>> Delay can be skipped if the firmware provides _DSM with function 8
> >>> implemented according to PCI firmwre spec 3.2 sec 4.6.8.
> >> 
> >> As someone who doesn't have access to the PCI spec...
> >> Questions below.
> >> 
> >>> 
> >>>> So let's skip the link training delay for S3, to save 1100ms resume
> >>>> time.
> >>>> 
> >>>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> >>>> ---
> >>>> drivers/pci/pci-driver.c | 3 ++-
> >>>> 1 file changed, 2 insertions(+), 1 deletion(-)
> >>>> 
> >>>> diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
> >>>> index 0454ca0e4e3f..3050375bad04 100644
> >>>> --- a/drivers/pci/pci-driver.c
> >>>> +++ b/drivers/pci/pci-driver.c
> >>>> @@ -916,7 +916,8 @@ static int pci_pm_resume_noirq(struct device *dev)
> >>>> 	pci_fixup_device(pci_fixup_resume_early, pci_dev);
> >>>> 	pcie_pme_root_status_cleanup(pci_dev);
> >>>> 
> >>>> -	if (!skip_bus_pm && prev_state == PCI_D3cold)
> >>>> +	if (!skip_bus_pm && prev_state == PCI_D3cold
> >>>> +	    && !pm_resume_via_firmware())
> >>> 
> >>> So this would need to check for the _DSM result as well. We do evaluate
> >>> it in pci_acpi_optimize_delay() (drivers/pci/pci-acpi.c) and that ends
> >>> up lowering ->d3cold_delay so maybe check that here.
> >> 
> >> Do we need to wait for d3cold_delay here?
> >> Or we can also skip that as long as pci_acpi_dsm_guid and FUNCTION_DELAY_DSM present?
> > 
> > Actually I think pci_bridge_wait_for_secondary_bus() already takes it
> > into account. Have you checked if the BIOS has this _DSM implemented in
> > the first place?
> 
> -[0000:00]-+-00.0  Intel Corporation Device 9b44
>            +-1c.0-[03-3b]----00.0-[04-3b]--+-00.0-[05]----00.0  Intel Corporation JHL7540 Thunderbolt 3 NHI [Titan Ridge 2C 2018]
>            |                               +-01.0-[06-3a]--
>            |                               \-02.0-[3b]----00.0  Intel Corporation JHL7540 Thunderbolt 3 USB Controller [Titan Ridge 2C 2018]
> 
> 00:1c.0 has _DSM implemented.
> How do I check for the Thunderbolt device?

Most likely you see it only under the root port (1c.0) so check
/sys/bus/pci/devices/0000:00:1c.0/firmware_node/path and match that one
to the ACPI tables.

> It doesn't seem to have a fixed _ADR so I don't know how to locate it in DSDT/SSDT table.
> 
> Log with additional debug message:
> [  948.813025] ACPI: EC: interrupt unblocked
> [  948.925017] pcieport 0000:00:01.0: pcie_wait_for_link_delay sleep 1100ms
> [  949.065466] pcieport 0000:04:00.0: pcie_wait_for_link_delay sleep 1100ms
> [  949.065468] pcieport 0000:04:02.0: pcie_wait_for_link_delay sleep 1100ms
> 
> 00:01.0 is the port for discrete graphics.

There is something wrong somewhere because the 1100ms sleep is totally
not expected to happen, but I think this is the same issue that we
discuss on another thread so let's use that thread instead to avoid
confusion :)

      reply	other threads:[~2020-03-12 10:08 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-11  4:52 Kai-Heng Feng
2020-03-11 10:28 ` Mika Westerberg
2020-03-12  4:23   ` Kai-Heng Feng
2020-03-12  8:04     ` Mika Westerberg
2020-03-12  9:45       ` Kai-Heng Feng
2020-03-12 10:08         ` Mika Westerberg [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200312100844.GR2540@lahna.fi.intel.com \
    --to=mika.westerberg@linux.intel.com \
    --cc=bhelgaas@google.com \
    --cc=kai.heng.feng@canonical.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --subject='Re: [PATCH] PCI/PM: Skip link training delay for S3 resume' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).