LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Eason Yen <eason.yen@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>,
	jiaxin.yu@mediatek.com, linux-kernel@vger.kernel.org,
	linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org,
	wsd_upstream@mediatek.com
Subject: Re: [PATCH 2/2] ASoC: codec: mediatek: add mt6359 codec driver
Date: Thu, 12 Mar 2020 19:08:05 +0000	[thread overview]
Message-ID: <20200312190805.GJ4038@sirena.org.uk> (raw)
In-Reply-To: <1583995387.19248.93.camel@mtkswgap22>

[-- Attachment #1: Type: text/plain, Size: 2636 bytes --]

On Thu, Mar 12, 2020 at 02:43:07PM +0800, Eason Yen wrote:
> On Wed, 2020-03-11 at 12:12 +0000, Mark Brown wrote:
> > On Wed, Mar 11, 2020 at 05:22:24PM +0800, Eason Yen wrote:
> > > On Mon, 2020-03-09 at 13:13 +0000, Mark Brown wrote:

> > > The following functions are used to set:
> > > - playback_gpio_set/playback_gpio_reset
> > > - capture_gpio_set/capture_gpio_reset
> > > - vow_gpio_set/vow_gpio_reset

> > This sounds like it should be handled at the machine driver level, it's
> > possible some system integrator will wire things up differently.

> machine driver will set default at booting stage to execute
> mt6359_mtkaif_calibration_enable and mt6359_mtkaif_calibration_disable.

> And at runtime stage, it is triggered by mt_dl_gpio_event and
> mt_ul_gpio_event while playback or capture.

What I'm suggesting is moving those to the machine driver (you could
provide helpers in the CODEC driver for the common case I guess...  I'd
need to review).

> OK. So it is better to fix mic_type (ACC/DMIC/DCC/DCC_*) at init stage
> because it will not be changed at runtime.

> And use another dpam mux or kcontrol to enable/disable vow for low power
> scenario.

> Is it right?

Yes.

> enum {
> 	LO_MUX_OPEN = 0,
> 	LO_MUX_L_DAC,
> 	LO_MUX_3RD_DAC,
> 	LO_MUX_TEST_MODE,
> 	LO_MUX_MASK = 0x3,
> };
> 
> static const char * const lo_in_mux_map[] = {
> 	"Open", "Playback_L_DAC", "Playback", "Test Mode"
> };
> 
> static SOC_ENUM_SINGLE_DECL(lo_in_mux_map_enum,
> 			    SND_SOC_NOPM, 0, lo_in_mux_map);
> 
> static const struct snd_kcontrol_new lo_in_mux_control =
> 	SOC_DAPM_ENUM("LO Select", lo_in_mux_map_enum);

That looks OK.

> > > > > +static int mt_delay_250_event(struct snd_soc_dapm_widget *w,
> > > > > +			      struct snd_kcontrol *kcontrol,
> > > > > +			      int event)
> > > > > +{
> > > > > +	switch (event) {
> > > > > +	case SND_SOC_DAPM_POST_PMU:
> > > > > +	case SND_SOC_DAPM_PRE_PMD:
> > > > > +		usleep_range(250, 270);

> > > > Why would having a sleep before power down be useful?

> > > It is based on designer's control sequence to add some delay while
> > > PMU/PMD.

> > But how does the designer know when the sequence starts?  Don't they
> > mean to have a delay *after* power down?

> For PMU, designer think 
> "AUD_CK" --> wait at least 250ms --> "AUDIF_CK" --> next ...

> For PMD, designer think 
> "AUDIF_CK" --> wait at least 250ms --> "AUD_CK" --> next ...

I think you need some comments about this in the code, it looks like a
mistake - it relies on the use of sequenced widgets, you should
reference that.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

      reply	other threads:[~2020-03-12 19:08 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-06  3:33 [PATCH 0/2] Add mediatek codec mt6359 driver Eason Yen
2020-03-06  3:33 ` [PATCH 1/2] ASoC: mediatek: mt6359: add codec document Eason Yen
2020-03-12 19:05   ` Rob Herring
2020-03-06  3:33 ` [PATCH 2/2] ASoC: codec: mediatek: add mt6359 codec driver Eason Yen
2020-03-09 13:13   ` Mark Brown
2020-03-11  9:22     ` Eason Yen
2020-03-11 12:12       ` Mark Brown
2020-03-12  6:43         ` Eason Yen
2020-03-12 19:08           ` Mark Brown [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200312190805.GJ4038@sirena.org.uk \
    --to=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=eason.yen@mediatek.com \
    --cc=jiaxin.yu@mediatek.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=wsd_upstream@mediatek.com \
    --subject='Re: [PATCH 2/2] ASoC: codec: mediatek: add mt6359 codec driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).