LKML Archive on lore.kernel.org
 help / color / Atom feed
From: "Alastair D'Silva" <alastair@d-silva.org>
To: alastair@d-silva.org
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>,
	"Oliver O\'Halloran" <oohall@gmail.com>,
	"Benjamin Herrenschmidt" <benh@kernel.crashing.org>,
	"Paul Mackerras" <paulus@samba.org>,
	"Michael Ellerman" <mpe@ellerman.id.au>,
	"Frederic Barrat" <fbarrat@linux.ibm.com>,
	"Andrew Donnellan" <ajd@linux.ibm.com>,
	"Arnd Bergmann" <arnd@arndb.de>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Dan Williams" <dan.j.williams@intel.com>,
	"Vishal Verma" <vishal.l.verma@intel.com>,
	"Dave Jiang" <dave.jiang@intel.com>,
	"Ira Weiny" <ira.weiny@intel.com>,
	"Andrew Morton" <akpm@linux-foundation.org>,
	"Mauro Carvalho Chehab" <mchehab+samsung@kernel.org>,
	"David S. Miller" <davem@davemloft.net>,
	"Rob Herring" <robh@kernel.org>,
	"Anton Blanchard" <anton@ozlabs.org>,
	"Krzysztof Kozlowski" <krzk@kernel.org>,
	"Mahesh Salgaonkar" <mahesh@linux.vnet.ibm.com>,
	"Madhavan Srinivasan" <maddy@linux.vnet.ibm.com>,
	"Cédric Le Goater" <clg@kaod.org>,
	"Anju T Sudhakar" <anju@linux.vnet.ibm.com>,
	"Hari Bathini" <hbathini@linux.ibm.com>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	"Greg Kurz" <groug@kaod.org>,
	"Nicholas Piggin" <npiggin@gmail.com>,
	"Masahiro Yamada" <yamada.masahiro@socionext.com>,
	"Alexey Kardashevskiy" <aik@ozlabs.ru>,
	linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
	linux-nvdimm@lists.01.org, linux-mm@kvack.org
Subject: [PATCH v4 13/25] nvdimm/ocxl: Read the capability registers & wait for device ready
Date: Fri, 27 Mar 2020 18:11:50 +1100
Message-ID: <20200327071202.2159885-14-alastair@d-silva.org> (raw)
In-Reply-To: <20200327071202.2159885-1-alastair@d-silva.org>

This patch reads timeouts & firmware version from the controller, and
uses those timeouts to wait for the controller to report that it is ready
before handing the memory over to libnvdimm.

Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
---
 drivers/nvdimm/ocxl/Makefile            |  2 +-
 drivers/nvdimm/ocxl/main.c              | 85 +++++++++++++++++++++++++
 drivers/nvdimm/ocxl/ocxlpmem.h          | 29 +++++++++
 drivers/nvdimm/ocxl/ocxlpmem_internal.c | 19 ++++++
 4 files changed, 134 insertions(+), 1 deletion(-)
 create mode 100644 drivers/nvdimm/ocxl/ocxlpmem_internal.c

diff --git a/drivers/nvdimm/ocxl/Makefile b/drivers/nvdimm/ocxl/Makefile
index e0e8ade1987a..bab97082e062 100644
--- a/drivers/nvdimm/ocxl/Makefile
+++ b/drivers/nvdimm/ocxl/Makefile
@@ -4,4 +4,4 @@ ccflags-$(CONFIG_PPC_WERROR)	+= -Werror
 
 obj-$(CONFIG_OCXL_PMEM) += ocxlpmem.o
 
-ocxlpmem-y := main.o
\ No newline at end of file
+ocxlpmem-y := main.o ocxlpmem_internal.o
diff --git a/drivers/nvdimm/ocxl/main.c b/drivers/nvdimm/ocxl/main.c
index c0066fedf9cc..be76acd33d74 100644
--- a/drivers/nvdimm/ocxl/main.c
+++ b/drivers/nvdimm/ocxl/main.c
@@ -8,6 +8,7 @@
 
 #include <linux/module.h>
 #include <misc/ocxl.h>
+#include <linux/delay.h>
 #include <linux/ndctl.h>
 #include <linux/mm_types.h>
 #include <linux/memory_hotplug.h>
@@ -327,6 +328,50 @@ static void remove(struct pci_dev *pdev)
 	}
 }
 
+/**
+ * read_device_metadata() - Retrieve config information from the AFU and save it for future use
+ * @ocxlpmem: the device metadata
+ * Return: 0 on success, negative on failure
+ */
+static int read_device_metadata(struct ocxlpmem *ocxlpmem)
+{
+	u64 val;
+	int rc;
+
+	rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu, GLOBAL_MMIO_CCAP0,
+				     OCXL_LITTLE_ENDIAN, &val);
+	if (rc)
+		return rc;
+
+	ocxlpmem->scm_revision = val & 0xFFFF;
+	ocxlpmem->read_latency = (val >> 32) & 0xFFFF;
+	ocxlpmem->readiness_timeout = (val >> 48) & 0x0F;
+	ocxlpmem->memory_available_timeout = val >> 52;
+
+	rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu, GLOBAL_MMIO_CCAP1,
+				     OCXL_LITTLE_ENDIAN, &val);
+	if (rc)
+		return rc;
+
+	ocxlpmem->max_controller_dump_size = val & 0xFFFFFFFF;
+
+	// Extract firmware version text
+	rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu, GLOBAL_MMIO_FWVER,
+				     OCXL_HOST_ENDIAN,
+				     (u64 *)ocxlpmem->fw_version);
+	if (rc)
+		return rc;
+
+	ocxlpmem->fw_version[8] = '\0';
+
+	dev_info(&ocxlpmem->dev,
+		 "Firmware version '%s' SCM revision %d:%d\n",
+		 ocxlpmem->fw_version, ocxlpmem->scm_revision >> 4,
+		 ocxlpmem->scm_revision & 0x0F);
+
+	return 0;
+}
+
 /**
  * probe_function0() - Set up function 0 for an OpenCAPI persistent memory device
  * This is important as it enables templates higher than 0 across all other
@@ -359,6 +404,9 @@ static int probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	struct ocxlpmem *ocxlpmem;
 	int rc;
+	u64 chi;
+	u16 elapsed, timeout;
+	bool ready = false;
 
 	if (PCI_FUNC(pdev->devfn) == 0)
 		return probe_function0(pdev);
@@ -413,6 +461,43 @@ static int probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err;
 	}
 
+	rc = read_device_metadata(ocxlpmem);
+	if (rc) {
+		dev_err(&pdev->dev, "Could not read metadata\n");
+		goto err;
+	}
+
+	elapsed = 0;
+	timeout = ocxlpmem->readiness_timeout +
+		  ocxlpmem->memory_available_timeout;
+
+	while (true) {
+		rc = ocxlpmem_chi(ocxlpmem, &chi);
+		ready = (chi & (GLOBAL_MMIO_CHI_CRDY | GLOBAL_MMIO_CHI_MA)) ==
+			(GLOBAL_MMIO_CHI_CRDY | GLOBAL_MMIO_CHI_MA);
+
+		if (ready)
+			break;
+
+		if (elapsed++ > timeout) {
+			dev_err(&ocxlpmem->dev,
+				"OpenCAPI Persistent Memory ready timeout.\n");
+
+			if (!(chi & GLOBAL_MMIO_CHI_CRDY))
+				dev_err(&ocxlpmem->dev,
+					"controller is not ready.\n");
+
+			if (!(chi & GLOBAL_MMIO_CHI_MA))
+				dev_err(&ocxlpmem->dev,
+					"controller does not have memory available.\n");
+
+			rc = -ENXIO;
+			goto err;
+		}
+
+		msleep(1000);
+	}
+
 	rc = register_lpc_mem(ocxlpmem);
 	if (rc) {
 		dev_err(&pdev->dev,
diff --git a/drivers/nvdimm/ocxl/ocxlpmem.h b/drivers/nvdimm/ocxl/ocxlpmem.h
index 322387873b4b..3eadbe19f6d0 100644
--- a/drivers/nvdimm/ocxl/ocxlpmem.h
+++ b/drivers/nvdimm/ocxl/ocxlpmem.h
@@ -93,4 +93,33 @@ struct ocxlpmem {
 	void *metadata_addr;
 	struct resource pmem_res;
 	struct nd_region *nd_region;
+	char fw_version[8 + 1];
+
+	u32 max_controller_dump_size;
+	u16 scm_revision; // major/minor
+	u8 readiness_timeout;  /* The worst case time (in seconds) that the host
+				* shall wait for the controller to become
+				* operational following a reset (CHI.CRDY).
+				*/
+	u8 memory_available_timeout;  /* The worst case time (in seconds) that
+				       * the host shall wait for memory to
+				       * become available following a reset
+				       * (CHI.MA).
+				       */
+
+	u16 read_latency; /* The nominal measure of latency (in nanoseconds)
+			   * associated with an unassisted read of a memory
+			   * block.
+			   * This represents the capability of the raw media
+			   * technology without assistance
+			   */
 };
+
+/**
+ * ocxlpmem_chi() - Get the value of the CHI register
+ * @ocxlpmem: the device metadata
+ * @chi: returns the CHI value
+ *
+ * Returns 0 on success, negative on error
+ */
+int ocxlpmem_chi(const struct ocxlpmem *ocxlpmem, u64 *chi);
diff --git a/drivers/nvdimm/ocxl/ocxlpmem_internal.c b/drivers/nvdimm/ocxl/ocxlpmem_internal.c
new file mode 100644
index 000000000000..5578169b7515
--- /dev/null
+++ b/drivers/nvdimm/ocxl/ocxlpmem_internal.c
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2020 IBM Corp.
+
+#include <misc/ocxl.h>
+#include <linux/delay.h>
+#include "ocxlpmem.h"
+
+int ocxlpmem_chi(const struct ocxlpmem *ocxlpmem, u64 *chi)
+{
+	u64 val;
+	int rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu, GLOBAL_MMIO_CHI,
+					 OCXL_LITTLE_ENDIAN, &val);
+	if (rc)
+		return rc;
+
+	*chi = val;
+
+	return 0;
+}
-- 
2.24.1


  parent reply index

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-27  7:11 [PATCH v4 00/25] Add support for OpenCAPI Persistent Memory devices Alastair D'Silva
2020-03-27  7:11 ` [PATCH v4 01/25] powerpc/powernv: Add OPAL calls for LPC memory alloc/release Alastair D'Silva
2020-04-01  8:48   ` Dan Williams
2020-04-01 22:51     ` Alastair D'Silva
2020-03-27  7:11 ` [PATCH v4 02/25] mm/memory_hotplug: Allow check_hotplug_memory_addressable to be called from drivers Alastair D'Silva
2020-04-01  8:48   ` Dan Williams
2020-04-02  4:33     ` Alastair D'Silva
2020-03-27  7:11 ` [PATCH v4 03/25] powerpc/powernv: Map & release OpenCAPI LPC memory Alastair D'Silva
2020-04-01  8:48   ` Dan Williams
2020-04-02  4:36     ` Alastair D'Silva
2020-04-02 10:41     ` Benjamin Herrenschmidt
2020-04-03  4:27       ` Michael Ellerman
2020-03-27  7:11 ` [PATCH v4 04/25] ocxl: Remove unnecessary externs Alastair D'Silva
2020-04-01  8:48   ` Dan Williams
2020-03-27  7:11 ` [PATCH v4 05/25] ocxl: Address kernel doc errors & warnings Alastair D'Silva
2020-04-01  8:49   ` Dan Williams
2020-03-27  7:11 ` [PATCH v4 06/25] ocxl: Tally up the LPC memory on a link & allow it to be mapped Alastair D'Silva
2020-04-01  8:48   ` Dan Williams
2020-04-02  6:21     ` Andrew Donnellan
2020-03-27  7:11 ` [PATCH v4 07/25] ocxl: Add functions to map/unmap LPC memory Alastair D'Silva
2020-04-01  8:49   ` Dan Williams
2020-04-03  3:50     ` Alastair D'Silva
2020-03-27  7:11 ` [PATCH v4 08/25] ocxl: Emit a log message showing how much LPC memory was detected Alastair D'Silva
2020-04-01  8:49   ` Dan Williams
2020-04-02  1:29     ` Joe Perches
2020-04-03  3:52     ` Alastair D'Silva
2020-03-27  7:11 ` [PATCH v4 09/25] ocxl: Save the device serial number in ocxl_fn Alastair D'Silva
2020-03-27  7:11 ` [PATCH v4 10/25] nvdimm: Add driver for OpenCAPI Persistent Memory Alastair D'Silva
2020-03-29  2:56   ` Matthew Wilcox
2020-03-29  2:59     ` Matthew Wilcox
2020-04-01  8:49   ` Dan Williams
2020-04-01 19:35     ` Dan Williams
2020-03-27  7:11 ` [PATCH v4 11/25] powerpc: Enable the OpenCAPI Persistent Memory driver for powernv_defconfig Alastair D'Silva
2020-04-01 20:26   ` Dan Williams
2020-03-27  7:11 ` [PATCH v4 12/25] nvdimm/ocxl: Add register addresses & status values to the header Alastair D'Silva
2020-04-01 20:27   ` Dan Williams
2020-03-27  7:11 ` Alastair D'Silva [this message]
2020-04-02  0:20   ` [PATCH v4 13/25] nvdimm/ocxl: Read the capability registers & wait for device ready Dan Williams
2020-03-27  7:11 ` [PATCH v4 14/25] nvdimm/ocxl: Add support for Admin commands Alastair D'Silva
2020-04-02  6:41   ` Dan Williams
2020-03-27  7:11 ` [PATCH v4 15/25] nvdimm/ocxl: Register a character device for userspace to interact with Alastair D'Silva
2020-04-02  0:27   ` Dan Williams
2020-03-27  7:11 ` [PATCH v4 16/25] nvdimm/ocxl: Implement the Read Error Log command Alastair D'Silva
2020-04-03  0:54   ` Dan Williams
2020-03-27  7:11 ` [PATCH v4 17/25] nvdimm/ocxl: Add controller dump IOCTLs Alastair D'Silva
2020-03-27  7:11 ` [PATCH v4 18/25] nvdimm/ocxl: Add an IOCTL to report controller statistics Alastair D'Silva
2020-03-27  7:11 ` [PATCH v4 19/25] nvdimm/ocxl: Forward events to userspace Alastair D'Silva
2020-04-02  2:08   ` Dan Williams
2020-03-27  7:11 ` [PATCH v4 20/25] nvdimm/ocxl: Add an IOCTL to request controller health & perf data Alastair D'Silva
2020-03-27  7:11 ` [PATCH v4 21/25] nvdimm/ocxl: Implement the heartbeat command Alastair D'Silva
2020-03-27  7:11 ` [PATCH v4 22/25] nvdimm/ocxl: Add debug IOCTLs Alastair D'Silva
2020-03-27  7:12 ` [PATCH v4 23/25] nvdimm/ocxl: Expose SMART data via ndctl Alastair D'Silva
2020-03-27  7:12 ` [PATCH v4 24/25] nvdimm/ocxl: Expose the serial number & firmware version in sysfs Alastair D'Silva
2020-03-27  7:12 ` [PATCH v4 25/25] MAINTAINERS: Add myself & nvdimm/ocxl to ocxl Alastair D'Silva
2020-04-01  8:47 ` [PATCH v4 00/25] Add support for OpenCAPI Persistent Memory devices Dan Williams
2020-04-01 22:44   ` Alastair D'Silva
2020-04-02  3:42     ` Michael Ellerman
2020-04-02  3:50       ` Oliver O'Halloran
2020-04-02 10:06         ` Michael Ellerman
2020-04-02 11:10           ` Greg Kurz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200327071202.2159885-14-alastair@d-silva.org \
    --to=alastair@d-silva.org \
    --cc=aik@ozlabs.ru \
    --cc=ajd@linux.ibm.com \
    --cc=akpm@linux-foundation.org \
    --cc=aneesh.kumar@linux.ibm.com \
    --cc=anju@linux.vnet.ibm.com \
    --cc=anton@ozlabs.org \
    --cc=arnd@arndb.de \
    --cc=benh@kernel.crashing.org \
    --cc=clg@kaod.org \
    --cc=dan.j.williams@intel.com \
    --cc=dave.jiang@intel.com \
    --cc=davem@davemloft.net \
    --cc=fbarrat@linux.ibm.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=groug@kaod.org \
    --cc=hbathini@linux.ibm.com \
    --cc=ira.weiny@intel.com \
    --cc=krzk@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-nvdimm@lists.01.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=maddy@linux.vnet.ibm.com \
    --cc=mahesh@linux.vnet.ibm.com \
    --cc=mchehab+samsung@kernel.org \
    --cc=mpe@ellerman.id.au \
    --cc=npiggin@gmail.com \
    --cc=oohall@gmail.com \
    --cc=paulus@samba.org \
    --cc=robh@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=vishal.l.verma@intel.com \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lkml.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lkml.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lkml.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lkml.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lkml.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lkml.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lkml.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lkml.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lkml.kernel.org/lkml/8 lkml/git/8.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lkml.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git