LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Russell King - ARM Linux admin <linux@armlinux.org.uk>
To: Matteo Croce <mcroce@redhat.com>
Cc: Antoine Tenart <antoine.tenart@bootlin.com>,
	netdev <netdev@vger.kernel.org>,
	"gregory.clement@bootlin.com" <gregory.clement@bootlin.com>,
	LKML <linux-kernel@vger.kernel.org>,
	Maxime Chevallier <maxime.chevallier@bootlin.com>,
	Nadav Haklai <nadavh@marvell.com>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	"miquel.raynal@bootlin.com" <miquel.raynal@bootlin.com>,
	Stefan Chulski <stefanc@marvell.com>,
	Marcin Wojtas <mw@semihalf.com>,
	"David S . Miller" <davem@davemloft.net>,
	Linux ARM <linux-arm-kernel@lists.infradead.org>
Subject: Re: [EXT] Re: [PATCH net-next 3/5] net: mvpp2: cls: Use RSS contexts to handle RSS tables
Date: Tue, 19 May 2020 10:53:30 +0100	[thread overview]
Message-ID: <20200519095330.GA1551@shell.armlinux.org.uk> (raw)
In-Reply-To: <20200509202050.GK1551@shell.armlinux.org.uk>

On Sat, May 09, 2020 at 09:20:50PM +0100, Russell King - ARM Linux admin wrote:
> On Sat, May 09, 2020 at 08:52:46PM +0100, Russell King - ARM Linux admin wrote:
> > It is highly likely that 895586d5dc32 is responsible for this breakage.
> > I've been investigating this afternoon, and what I've found, comparing
> > a kernel without 895586d5dc32 and with 895586d5dc32 applied is:
> > 
> > - The table programmed into the hardware via mvpp22_rss_fill_table()
> >   appears to be identical with or without the commit.
> > 
> > - When rxhash is enabled on eth2, mvpp2_rss_port_c2_enable() reports
> >   that c2.attr[0] and c2.attr[2] are written back containing:
> > 
> >    - with 895586d5dc32, failing:    00200000 40000000
> >    - without 895586d5dc32, working: 04000000 40000000
> > 
> > - When disabling rxhash, c2.attr[0] and c2.attr[2] are written back as:
> > 
> >    04000000 00000000
> > 
> > The second value represents the MVPP22_CLS_C2_ATTR2_RSS_EN bit, the
> > first value is the queue number, which comprises two fields.  The high
> > 5 bits are 24:29 and the low three are 21:23 inclusive.  This comes
> > from:
> > 
> >        c2.attr[0] = MVPP22_CLS_C2_ATTR0_QHIGH(qh) |
> >                      MVPP22_CLS_C2_ATTR0_QLOW(ql);
> > #define     MVPP22_CLS_C2_ATTR0_QHIGH(qh)       (((qh) & 0x1f) << 24)
> > #define     MVPP22_CLS_C2_ATTR0_QLOW(ql)        (((ql) & 0x7) << 21)
> > 
> > So, the working case gives eth2 a queue id of 4.0, or 32 as per
> > port->first_rxq, and the non-working case a queue id of 0.1, or 1.
> > 
> > The allocation of queue IDs seems to be in mvpp2_port_probe():
> > 
> >         if (priv->hw_version == MVPP21)
> >                 port->first_rxq = port->id * port->nrxqs;
> >         else
> >                 port->first_rxq = port->id * priv->max_port_rxqs;
> > 
> > Where:
> > 
> >         if (priv->hw_version == MVPP21)
> >                 priv->max_port_rxqs = 8;
> >         else
> >                 priv->max_port_rxqs = 32;
> > 
> > Making the port 0 (eth0 / eth1) have port->first_rxq = 0, and port 1
> > (eth2) be 32.  It seems the idea is that the first 32 queues belong to
> > port 0, the second 32 queues belong to port 1, etc.
> > 
> > mvpp2_rss_port_c2_enable() gets the queue number from it's parameter,
> > 'ctx', which comes from mvpp22_rss_ctx(port, 0).  This returns
> > port->rss_ctx[0].
> > 
> > mvpp22_rss_context_create() is responsible for allocating that, which
> > it does by looking for an unallocated priv->rss_tables[] pointer.  This
> > table is shared amongst all ports on the CP silicon.
> > 
> > When we write the tables in mvpp22_rss_fill_table(), the RSS table
> > entry is defined by:
> > 
> > 		u32 sel = MVPP22_RSS_INDEX_TABLE(rss_ctx) |
> >                           MVPP22_RSS_INDEX_TABLE_ENTRY(i);
> > 
> > where rss_ctx is the context ID (queue number) and i is the index in
> > the table.
> > 
> > #define     MVPP22_RSS_INDEX_TABLE_ENTRY(idx)   (idx)
> > #define     MVPP22_RSS_INDEX_TABLE(idx)         ((idx) << 8)
> > #define     MVPP22_RSS_INDEX_QUEUE(idx)         ((idx) << 16)
> > 
> > If we look at what is written:
> > 
> > - The first table to be written has "sel" values of 00000000..0000001f,
> >   containing values 0..3. This appears to be for eth1.  This is table 0,
> >   RX queue number 0.
> > - The second table has "sel" values of 00000100..0000011f, and appears
> >   to be for eth2.  These contain values 0x20..0x23.  This is table 1,
> >   RX queue number 0.
> > - The third table has "sel" values of 00000200..0000021f, and appears
> >   to be for eth3.  These contain values 0x40..0x43.  This is table 2,
> >   RX queue number 0.
> > 
> > Okay, so how do queue numbers translate to the RSS table?  There is
> > another table - the RXQ2RSS table, indexed by the MVPP22_RSS_INDEX_QUEUE
> > field of MVPP22_RSS_INDEX and accessed through the MVPP22_RXQ2RSS_TABLE
> > register.  Before 895586d5dc32, it was:
> > 
> >        mvpp2_write(priv, MVPP22_RSS_INDEX,
> >                    MVPP22_RSS_INDEX_QUEUE(port->first_rxq));
> >        mvpp2_write(priv, MVPP22_RXQ2RSS_TABLE,
> >                    MVPP22_RSS_TABLE_POINTER(port->id));
> > 
> > and after:
> > 
> >        mvpp2_write(priv, MVPP22_RSS_INDEX, MVPP22_RSS_INDEX_QUEUE(ctx));
> >        mvpp2_write(priv, MVPP22_RXQ2RSS_TABLE, MVPP22_RSS_TABLE_POINTER(ctx));
> > 
> > So, before the commit, for eth2, that would've contained '32' for the
> > index and '1' for the table pointer - mapping queue 32 to table 1.
> > Remember that this is queue-high.queue-low of 4.0.
> > 
> > After the commit, we appear to map queue 1 to table 1.  That again
> > looks fine on the face of it.
> > 
> > Section 9.3.1 of the A8040 manual seems indicate the reason that the
> > queue number is separated.  queue-low seems to always come from the
> > classifier, whereas queue-high can be from the ingress physical port
> > number or the classifier depending on the MVPP2_CLS_SWFWD_PCTRL_REG.
> > 
> > We set the port bit in MVPP2_CLS_SWFWD_PCTRL_REG, meaning that queue-high
> > comes from the MVPP2_CLS_SWFWD_P2HQ_REG() register... and this seems to
> > be where our bug comes from.
> > 
> > mvpp2_cls_oversize_rxq_set() sets this up as:
> > 
> >         mvpp2_write(port->priv, MVPP2_CLS_SWFWD_P2HQ_REG(port->id),
> >                     (port->first_rxq >> MVPP2_CLS_OVERSIZE_RXQ_LOW_BITS));
> > 
> >         val = mvpp2_read(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG);
> >         val |= MVPP2_CLS_SWFWD_PCTRL_MASK(port->id);
> >         mvpp2_write(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG, val);
> > 
> > so, the queue-high for eth2 is _always_ 4, meaning that only queues
> > 32 through 39 inclusive are available to eth2.  Yet, we're trying to
> > tell the classifier to set queue-high, which will be ignored, to zero.
> > 
> > So we end up directing traffic from eth2 not to queue 1, but to queue
> > 33, and then we tell it to look up queue 33 in the RSS table.  However,
> > RSS table has not been programmed for queue 33, and so it ends up
> > (presumably) dropping the packets.
> > 
> > It seems that mvpp22_rss_context_create() doesn't take account of the
> > fact that the upper 5 bits of the queue ID can't actually be changed
> > due to the settings in mvpp2_cls_oversize_rxq_set(), _or_ it seems
> > that mvpp2_cls_oversize_rxq_set() has been missed in this commit.
> > Either way, these two functions mutually disagree with what queue
> > number should be used.
> > 
> > So, 895586d5dc32 is indeed the cause of this problem.
> 
> Looking deeper into what mvpp2_cls_oversize_rxq_set() and the MTU
> validation is doing, it seems that MVPP2_CLS_SWFWD_P2HQ_REG() is
> used for at least a couple of things.
> 
> So, with the classifier having had RSS enabled and directing eth2
> traffic to queue 1, we can not ignore the fact that we may have
> packets appearing on queue 32 for this port.
> 
> One of the things that queue 32 will be used for is if an over-sized
> packet attempts to egress through eth2 - it seems that the A8040 has
> the ability to forward frames between its ports.  However, afaik we
> don't support that feature, and the kernel restricts the packet size,
> so we should never violate the MTU validator and end up with such a
> packet.  In any case, _if_ we were to attempt to transmit an oversized
> packet, we have no support in the kernel to deal with that appearing
> in the port's receive queue.
> 
> Maybe it would be safe to clear the MVPP2_CLS_SWFWD_PCTRL_MASK() bit?
> 
> My testing seems to confirm my findings above - clearing this bit
> means that if I enable rxhash on eth2, the interface can then pass
> traffic, as we are now directing traffic to RX queue 1 rather than
> queue 33.  Traffic still seems to work with rxhash off as well.
> 
> So, I think it's clear where the problem lies, but not what the correct
> solution is; someone with more experience of packet classifiers (this
> one?) needs to look at this - this is my first venture into these
> things, and certainly the first time I've traced through how this is
> trying to work (or not)...

This is what I was using here to work around the problem, and what I
mentioned above.

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c
index fd221d88811e..0dd3b65822dd 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c
@@ -1058,7 +1058,7 @@ void mvpp2_cls_oversize_rxq_set(struct mvpp2_port *port)
 		    (port->first_rxq >> MVPP2_CLS_OVERSIZE_RXQ_LOW_BITS));
 
 	val = mvpp2_read(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG);
-	val |= MVPP2_CLS_SWFWD_PCTRL_MASK(port->id);
+	val &= ~MVPP2_CLS_SWFWD_PCTRL_MASK(port->id);
 	mvpp2_write(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG, val);
 }
 

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC for 0.8m (est. 1762m) line in suburbia: sync at 13.1Mbps down 424kbps up

  reply	other threads:[~2020-05-19  9:54 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-24 10:05 [PATCH net-next 0/5] net: mvpp2: Classifier updates, RSS Maxime Chevallier
2019-05-24 10:05 ` [PATCH net-next 1/5] net: mvpp2: cls: Use the correct number of rules in various places Maxime Chevallier
2019-05-24 10:05 ` [PATCH net-next 2/5] net: mvpp2: cls: Bypass C2 internals FIFOs at init Maxime Chevallier
2019-05-24 10:05 ` [PATCH net-next 3/5] net: mvpp2: cls: Use RSS contexts to handle RSS tables Maxime Chevallier
2020-04-13 23:43   ` Matteo Croce
2020-04-23 17:00     ` Russell King - ARM Linux admin
2020-05-09  0:12       ` Matteo Croce
2020-05-09 11:15         ` [EXT] " Stefan Chulski
2020-05-09 11:45           ` Russell King - ARM Linux admin
2020-05-09 12:16             ` Thomas Petazzoni
2020-05-09 12:48               ` Russell King - ARM Linux admin
2020-05-09 13:10                 ` Thomas Petazzoni
2020-05-09 13:14             ` Matteo Croce
2020-05-09 13:51               ` Russell King - ARM Linux admin
2020-05-09 14:48                 ` Russell King - ARM Linux admin
2020-05-09 15:31                   ` Matteo Croce
2020-05-09 19:52               ` Russell King - ARM Linux admin
2020-05-09 20:20                 ` Russell King - ARM Linux admin
2020-05-19  9:53                   ` Russell King - ARM Linux admin [this message]
2020-05-19 10:05                     ` Matteo Croce
2020-05-19 17:05                       ` Matteo Croce
2020-05-20 11:10                         ` Russell King - ARM Linux admin
2020-05-20 11:16                           ` Matteo Croce
2020-05-20 11:18                             ` Russell King - ARM Linux admin
2020-05-09 12:16           ` Matteo Croce
2020-05-09 12:31             ` Stefan Chulski
2020-05-09 13:25               ` Russell King - ARM Linux admin
2019-05-24 10:05 ` [PATCH net-next 4/5] net: mvpp2: cls: Extract the RSS context when parsing the ethtool rule Maxime Chevallier
2019-05-24 10:05 ` [PATCH net-next 5/5] net: mvpp2: cls: Support steering to RSS contexts Maxime Chevallier
2019-05-25 23:38 ` [PATCH net-next 0/5] net: mvpp2: Classifier updates, RSS David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200519095330.GA1551@shell.armlinux.org.uk \
    --to=linux@armlinux.org.uk \
    --cc=antoine.tenart@bootlin.com \
    --cc=davem@davemloft.net \
    --cc=gregory.clement@bootlin.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maxime.chevallier@bootlin.com \
    --cc=mcroce@redhat.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=mw@semihalf.com \
    --cc=nadavh@marvell.com \
    --cc=netdev@vger.kernel.org \
    --cc=stefanc@marvell.com \
    --cc=thomas.petazzoni@bootlin.com \
    --subject='Re: [EXT] Re: [PATCH net-next 3/5] net: mvpp2: cls: Use RSS contexts to handle RSS tables' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).