LKML Archive on lore.kernel.org help / color / mirror / Atom feed
From: Andreas Kemnade <andreas@kemnade.info> To: "Jonathan Neuschäfer" <j.neuschaefer@gmx.net> Cc: linux-kernel@vger.kernel.org, "Lee Jones" <lee.jones@linaro.org>, "Rob Herring" <robh+dt@kernel.org>, "Thierry Reding" <thierry.reding@gmail.com>, "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>, "Alessandro Zummo" <a.zummo@towertech.it>, "Alexandre Belloni" <alexandre.belloni@bootlin.com>, "Shawn Guo" <shawnguo@kernel.org>, "Sascha Hauer" <s.hauer@pengutronix.de>, "Pengutronix Kernel Team" <kernel@pengutronix.de>, "Fabio Estevam" <festevam@gmail.com>, "NXP Linux Team" <linux-imx@nxp.com>, "Sam Ravnborg" <sam@ravnborg.org>, "Linus Walleij" <linus.walleij@linaro.org>, "Heiko Stuebner" <heiko.stuebner@theobroma-systems.com>, "Stephan Gerhold" <stephan@gerhold.net>, "Lubomir Rintel" <lkundrak@v3.sk>, "Mark Brown" <broonie@kernel.org>, allen <allen.chen@ite.com.tw>, "Mauro Carvalho Chehab" <mchehab+huawei@kernel.org>, "David S. Miller" <davem@davemloft.net>, devicetree@vger.kernel.org, linux-pwm@vger.kernel.org, linux-rtc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, "Heiko Stuebner" <heiko@sntech.de>, "Josua Mayer" <josua.mayer@jm0.eu>, "Arnd Bergmann" <arnd@arndb.de>, "Daniel Palmer" <daniel@0x0f.com>, "Andy Shevchenko" <andy.shevchenko@gmail.com> Subject: Re: [PATCH v3 5/7] rtc: New driver for RTC in Netronix embedded controller Date: Thu, 24 Sep 2020 22:40:11 +0200 [thread overview] Message-ID: <20200924224011.074d7a19@aktux> (raw) In-Reply-To: <20200924192455.2484005-6-j.neuschaefer@gmx.net> On Thu, 24 Sep 2020 21:24:53 +0200 Jonathan Neuschäfer <j.neuschaefer@gmx.net> wrote: > With this driver, mainline Linux can keep its time and date in sync with > the vendor kernel. > > Advanced functionality like alarm and automatic power-on is not yet > supported. > > Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> > --- > > v3: > - Add email address to copyright line > - Remove OF compatible string and don't include linux/of_device.h > - Don't use a comma after sentinels > - Avoid ret |= ... pattern > - Move 8-bit register conversion to ntxec.h > - Relicense as GPLv2 or later > > v2: > - https://lore.kernel.org/lkml/20200905133230.1014581-7-j.neuschaefer@gmx.net/ > - Rework top-of-file comment [Lee Jones] > - Sort the #include lines [Alexandre Belloni] > - don't align = signs in struct initializers [Uwe Kleine-König] > - Switch to regmap > - Fix register number used to read minutes and seconds > - Prefix registers with NTXEC_REG_ > - Add help text to the Kconfig option > - Use devm_rtc_allocate_device and rtc_register_device, set ->range_min and ->range_max > --- > drivers/rtc/Kconfig | 8 +++ > drivers/rtc/Makefile | 1 + > drivers/rtc/rtc-ntxec.c | 132 ++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 141 insertions(+) > create mode 100644 drivers/rtc/rtc-ntxec.c > > diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig > index 48c536acd777f..ae8f3dc36c9a3 100644 > --- a/drivers/rtc/Kconfig > +++ b/drivers/rtc/Kconfig > @@ -1301,6 +1301,14 @@ config RTC_DRV_CROS_EC > This driver can also be built as a module. If so, the module > will be called rtc-cros-ec. > > +config RTC_DRV_NTXEC > + tristate "Netronix embedded controller RTC driver" > + depends on MFD_NTXEC > + help > + Say yes here if you want to support the RTC functionality of the > + embedded controller found in certain e-book readers designed by the > + ODM Netronix. > + > comment "on-CPU RTC drivers" > > config RTC_DRV_ASM9260 > diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile > index 880e08a409c3d..733479db18896 100644 > --- a/drivers/rtc/Makefile > +++ b/drivers/rtc/Makefile > @@ -111,6 +111,7 @@ obj-$(CONFIG_RTC_DRV_MT7622) += rtc-mt7622.o > obj-$(CONFIG_RTC_DRV_MV) += rtc-mv.o > obj-$(CONFIG_RTC_DRV_MXC) += rtc-mxc.o > obj-$(CONFIG_RTC_DRV_MXC_V2) += rtc-mxc_v2.o > +obj-$(CONFIG_RTC_DRV_NTXEC) += rtc-ntxec.o > obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o > obj-$(CONFIG_RTC_DRV_OPAL) += rtc-opal.o > obj-$(CONFIG_RTC_DRV_PALMAS) += rtc-palmas.o > diff --git a/drivers/rtc/rtc-ntxec.c b/drivers/rtc/rtc-ntxec.c > new file mode 100644 > index 0000000000000..af23c7cc76544 > --- /dev/null > +++ b/drivers/rtc/rtc-ntxec.c > @@ -0,0 +1,132 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * The Netronix embedded controller is a microcontroller found in some > + * e-book readers designed by the ODM Netronix, Inc. It contains RTC, > + * battery monitoring, system power management, and PWM functionality. > + * > + * This driver implements access to the RTC time and date. > + * > + * Copyright 2020 Jonathan Neuschäfer <j.neuschaefer@gmx.net> > + */ > + > +#include <linux/mfd/ntxec.h> > +#include <linux/module.h> > +#include <linux/platform_device.h> > +#include <linux/regmap.h> > +#include <linux/rtc.h> > +#include <linux/types.h> > + > +struct ntxec_rtc { > + struct device *dev; > + struct ntxec *ec; > +}; > + > +#define NTXEC_REG_WRITE_YEAR 0x10 > +#define NTXEC_REG_WRITE_MONTH 0x11 > +#define NTXEC_REG_WRITE_DAY 0x12 > +#define NTXEC_REG_WRITE_HOUR 0x13 > +#define NTXEC_REG_WRITE_MINUTE 0x14 > +#define NTXEC_REG_WRITE_SECOND 0x15 > + > +#define NTXEC_REG_READ_YM 0x20 > +#define NTXEC_REG_READ_DH 0x21 > +#define NTXEC_REG_READ_MS 0x23 > + > +static int ntxec_read_time(struct device *dev, struct rtc_time *tm) > +{ > + struct ntxec_rtc *rtc = dev_get_drvdata(dev); > + unsigned int value; > + int res; > + > + res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_YM, &value); > + if (res < 0) > + return res; > + > + tm->tm_year = (value >> 8) + 100; > + tm->tm_mon = (value & 0xff) - 1; > + > + res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_DH, &value); > + if (res < 0) > + return res; > + > + tm->tm_mday = value >> 8; > + tm->tm_hour = value & 0xff; > + > + res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_MS, &value); > + if (res < 0) > + return res; > + > + tm->tm_min = value >> 8; > + tm->tm_sec = value & 0xff; > + > + return 0; > +} > + > +static int ntxec_set_time(struct device *dev, struct rtc_time *tm) > +{ > + struct ntxec_rtc *rtc = dev_get_drvdata(dev); > + int res = 0; > + > + res = regmap_write(rtc->ec->regmap, NTXEC_REG_WRITE_YEAR, ntxec_reg8(tm->tm_year - 100)); > + if (res) > + return res; > + > + res = regmap_write(rtc->ec->regmap, NTXEC_REG_WRITE_MONTH, ntxec_reg8(tm->tm_mon + 1)); > + if (res) > + return res; > + > + res = regmap_write(rtc->ec->regmap, NTXEC_REG_WRITE_DAY, ntxec_reg8(tm->tm_mday)); > + if (res) > + return res; > + > + res = regmap_write(rtc->ec->regmap, NTXEC_REG_WRITE_HOUR, ntxec_reg8(tm->tm_hour)); > + if (res) > + return res; > + > + res = regmap_write(rtc->ec->regmap, NTXEC_REG_WRITE_MINUTE, ntxec_reg8(tm->tm_min)); > + if (res) > + return res; > + > + return regmap_write(rtc->ec->regmap, NTXEC_REG_WRITE_SECOND, ntxec_reg8(tm->tm_sec)); > +} > + > +static const struct rtc_class_ops ntxec_rtc_ops = { > + .read_time = ntxec_read_time, > + .set_time = ntxec_set_time, > +}; > + > +static int ntxec_rtc_probe(struct platform_device *pdev) > +{ > + struct rtc_device *dev; > + struct ntxec_rtc *rtc; > + > + rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL); > + if (!rtc) > + return -ENOMEM; > + > + rtc->dev = &pdev->dev; > + rtc->ec = dev_get_drvdata(pdev->dev.parent); > + platform_set_drvdata(pdev, rtc); > + > + dev = devm_rtc_allocate_device(&pdev->dev); > + if (IS_ERR(dev)) > + return PTR_ERR(dev); > + > + dev->ops = &ntxec_rtc_ops; > + dev->range_min = RTC_TIMESTAMP_BEGIN_2000; > + dev->range_max = 9025257599LL; /* 2255-12-31 23:59:59 */ > + > + return rtc_register_device(dev); > +} > + > +static struct platform_driver ntxec_rtc_driver = { > + .driver = { > + .name = "ntxec-rtc", > + }, > + .probe = ntxec_rtc_probe, > +}; > +module_platform_driver(ntxec_rtc_driver); > + I think module autoloading will not work without MODULE_ALIAS("platform:ntxec-rtc"); Same for the pwm device. > +MODULE_AUTHOR("Jonathan Neuschäfer <j.neuschaefer@gmx.net>"); > +MODULE_DESCRIPTION("RTC driver for Netronix EC"); > +MODULE_LICENSE("GPL"); > -- > 2.28.0 > > Regards, Andreas
next prev parent reply other threads:[~2020-09-24 20:40 UTC|newest] Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-24 19:24 [PATCH v3 0/7] Netronix embedded controller driver for Kobo and Tolino ebook readers Jonathan Neuschäfer 2020-09-24 19:24 ` [PATCH v3 1/7] dt-bindings: Add vendor prefix for Netronix, Inc Jonathan Neuschäfer 2020-10-12 7:19 ` Uwe Kleine-König 2020-10-12 11:48 ` Lee Jones 2020-09-24 19:24 ` [PATCH v3 2/7] dt-bindings: mfd: Add binding for Netronix embedded controller Jonathan Neuschäfer 2020-09-29 18:52 ` Rob Herring 2020-09-24 19:24 ` [PATCH v3 3/7] mfd: Add base driver " Jonathan Neuschäfer 2020-09-25 9:29 ` Andy Shevchenko 2020-09-25 21:32 ` Jonathan Neuschäfer 2020-09-29 16:37 ` Andy Shevchenko 2020-10-02 22:54 ` Jonathan Neuschäfer 2020-09-24 19:24 ` [PATCH v3 4/7] pwm: ntxec: Add driver for PWM function in Netronix EC Jonathan Neuschäfer 2020-09-25 6:30 ` Uwe Kleine-König 2020-09-27 21:10 ` Jonathan Neuschäfer 2020-09-28 8:35 ` Uwe Kleine-König 2020-10-02 23:36 ` Jonathan Neuschäfer 2020-10-03 8:17 ` Andy Shevchenko 2020-09-24 19:24 ` [PATCH v3 5/7] rtc: New driver for RTC in Netronix embedded controller Jonathan Neuschäfer 2020-09-24 20:40 ` Andreas Kemnade [this message] 2020-10-02 23:41 ` Jonathan Neuschäfer 2020-09-25 5:44 ` Uwe Kleine-König 2020-10-04 1:43 ` Jonathan Neuschäfer 2020-10-04 8:42 ` Alexandre Belloni 2020-10-11 19:09 ` Jonathan Neuschäfer 2020-10-05 7:35 ` Uwe Kleine-König 2020-09-25 9:36 ` Alexandre Belloni 2020-09-25 22:00 ` Jonathan Neuschäfer 2020-09-24 19:24 ` [PATCH v3 6/7] MAINTAINERS: Add entry for " Jonathan Neuschäfer 2020-09-25 5:08 ` [PATCH v3 7/7] ARM: dts: imx50-kobo-aura: Add " Jonathan Neuschäfer 2020-10-07 7:46 ` Krzysztof Kozlowski 2020-10-11 19:42 ` Jonathan Neuschäfer
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200924224011.074d7a19@aktux \ --to=andreas@kemnade.info \ --cc=a.zummo@towertech.it \ --cc=alexandre.belloni@bootlin.com \ --cc=allen.chen@ite.com.tw \ --cc=andy.shevchenko@gmail.com \ --cc=arnd@arndb.de \ --cc=broonie@kernel.org \ --cc=daniel@0x0f.com \ --cc=davem@davemloft.net \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=heiko.stuebner@theobroma-systems.com \ --cc=heiko@sntech.de \ --cc=j.neuschaefer@gmx.net \ --cc=josua.mayer@jm0.eu \ --cc=kernel@pengutronix.de \ --cc=lee.jones@linaro.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pwm@vger.kernel.org \ --cc=linux-rtc@vger.kernel.org \ --cc=lkundrak@v3.sk \ --cc=mchehab+huawei@kernel.org \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=sam@ravnborg.org \ --cc=shawnguo@kernel.org \ --cc=stephan@gerhold.net \ --cc=thierry.reding@gmail.com \ --cc=u.kleine-koenig@pengutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).