LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Alain Volmat <avolmat@me.com>
To: Patrice Chotard <patrice.chotard@foss.st.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, avolmat@me.com
Subject: [PATCH v3 01/13] ARM: dts: sti: update flexgen compatible within stih418-clock
Date: Wed, 31 Mar 2021 22:42:16 +0200	[thread overview]
Message-ID: <20210331204228.26107-2-avolmat@me.com> (raw)
In-Reply-To: <20210331204228.26107-1-avolmat@me.com>

With the introduction of new flexgen compatible within the clk-flexgen
driver, remove the clock-output-names entry from the flexgen nodes
and set the new proper compatible corresponding.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 arch/arm/boot/dts/stih418-clock.dtsi | 96 ++--------------------------
 1 file changed, 5 insertions(+), 91 deletions(-)

diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index 8fa092462102..35d12979cdf4 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -83,15 +83,12 @@
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-a0";
 
 				#clock-cells = <1>;
 
 				clocks = <&clk_s_a0_pll 0>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-ic-lmi0",
-						     "clk-ic-lmi1";
 			};
 		};
 
@@ -132,7 +129,7 @@
 
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih418-c0";
 
 				clocks = <&clk_s_c0_pll0 0>,
 					 <&clk_s_c0_pll1 0>,
@@ -142,49 +139,6 @@
 					 <&clk_s_c0_quadfs 3>,
 					 <&clk_sysin>;
 
-				clock-output-names = "clk-icn-gpu",
-						     "clk-fdma",
-						     "clk-nand",
-						     "clk-hva",
-						     "clk-proc-stfe",
-						     "clk-tp",
-						     "clk-rx-icn-dmu",
-						     "clk-rx-icn-hva",
-						     "clk-icn-cpu",
-						     "clk-tx-icn-dmu",
-						     "clk-mmc-0",
-						     "clk-mmc-1",
-						     "clk-jpegdec",
-						     "clk-icn-reg",
-						     "clk-proc-bdisp-0",
-						     "clk-proc-bdisp-1",
-						     "clk-pp-dmu",
-						     "clk-vid-dmu",
-						     "clk-dss-lpc",
-						     "clk-st231-aud-0",
-						     "clk-st231-gp-1",
-						     "clk-st231-dmu",
-						     "clk-icn-lmi",
-						     "clk-tx-icn-1",
-						     "clk-icn-sbc",
-						     "clk-stfe-frc2",
-						     "clk-eth-phyref",
-						     "clk-eth-ref-phyclk",
-						     "clk-flash-promip",
-						     "clk-main-disp",
-						     "clk-aux-disp",
-						     "clk-compo-dvp",
-						     "clk-tx-icn-hades",
-						     "clk-rx-icn-hades",
-						     "clk-icn-reg-16",
-						     "clk-pp-hevc",
-						     "clk-clust-hevc",
-						     "clk-hwpe-hevc",
-						     "clk-fc-hevc",
-						     "clk-proc-mixer",
-						     "clk-proc-sc",
-						     "clk-avsp-hevc";
-
 				/*
 				 * ARM Peripheral clock for timers
 				 */
@@ -221,20 +175,13 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-audio", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-d0";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
 					 <&clk_s_d0_quadfs 2>,
 					 <&clk_s_d0_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-pcm-0",
-						     "clk-pcm-1",
-						     "clk-pcm-2",
-						     "clk-spdiff",
-						     "clk-pcmr10-master",
-						     "clk-usb2-phy";
 			};
 		};
 
@@ -257,7 +204,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-video", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih418-d2";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -266,30 +213,6 @@
 					 <&clk_sysin>,
 					 <&clk_sysin>,
 					 <&clk_tmdsout_hdmi>;
-
-				clock-output-names = "clk-pix-main-disp",
-						     "",
-						     "",
-						     "",
-						     "",
-						     "clk-tmds-hdmi-div2",
-						     "clk-pix-aux-disp",
-						     "clk-denc",
-						     "clk-pix-hddac",
-						     "clk-hddac",
-						     "clk-sddac",
-						     "clk-pix-dvo",
-						     "clk-dvo",
-						     "clk-pix-hdmi",
-						     "clk-tmds-hdmi",
-						     "clk-ref-hdmiphy",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "clk-vp9";
 			};
 		};
 
@@ -312,22 +235,13 @@
 
 			clk_s_d3_flexgen: clk-s-d3-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d3";
 
 				clocks = <&clk_s_d3_quadfs 0>,
 					 <&clk_s_d3_quadfs 1>,
 					 <&clk_s_d3_quadfs 2>,
 					 <&clk_s_d3_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-stfe-frc1",
-						     "clk-tsout-0",
-						     "clk-tsout-1",
-						     "clk-mchi",
-						     "clk-vsens-compo",
-						     "clk-frc1-remote",
-						     "clk-lpc-0",
-						     "clk-lpc-1";
 			};
 		};
 	};
-- 
2.17.1


  reply	other threads:[~2021-03-31 20:44 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-31 20:42 [PATCH v3 00/13] Introduction of STiH418 based 4KOpen board Alain Volmat
2021-03-31 20:42 ` Alain Volmat [this message]
2021-08-03 12:03   ` [PATCH v3 01/13] ARM: dts: sti: update flexgen compatible within stih418-clock Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 02/13] ARM: dts: sti: update flexgen compatible within stih407-clock Alain Volmat
2021-08-03 12:03   ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 03/13] ARM: dts: sti: update flexgen compatible within stih410-clock Alain Volmat
2021-08-03 12:04   ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 04/13] ARM: dts: sti: update clkgen-pll entries in stih407-clock Alain Volmat
2021-08-03 12:04   ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 05/13] ARM: dts: sti: update clkgen-pll entries in stih410-clock Alain Volmat
2021-08-03 12:05   ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 06/13] ARM: dts: sti: update clkgen-pll entries in stih418-clock Alain Volmat
2021-08-03 12:05   ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 07/13] ARM: dts: sti: update clkgen-fsyn entries in stih407-clock Alain Volmat
2021-08-03 12:06   ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 08/13] ARM: dts: sti: update clkgen-fsyn entries in stih410-clock Alain Volmat
2021-08-03 12:07   ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 09/13] ARM: dts: sti: update clkgen-fsyn entries in stih418-clock Alain Volmat
2021-08-03 12:07   ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 10/13] ARM: dts: sti: add the spinor controller node within stih407-family Alain Volmat
2021-08-03 12:08   ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 11/13] ARM: dts: sti: disable rng11 on the stih418 platform Alain Volmat
2021-08-03 12:08   ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 12/13] ARM: dts: sti: add the thermal sensor node within stih418 Alain Volmat
2021-08-03 12:08   ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 13/13] ARM: dts: sti: Introduce 4KOpen (stih418-b2264) board Alain Volmat
2021-08-03 12:09   ` Patrice CHOTARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210331204228.26107-2-avolmat@me.com \
    --to=avolmat@me.com \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patrice.chotard@foss.st.com \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH v3 01/13] ARM: dts: sti: update flexgen compatible within stih418-clock' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).