LKML Archive on lore.kernel.org help / color / mirror / Atom feed
From: Robert Marko <robert.marko@sartura.hr> To: linus.walleij@linaro.org, bgolaszewski@baylibre.com, robh+dt@kernel.org, lee.jones@linaro.org, p.zabel@pengutronix.de, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: luka.perkov@sartura.hr, jmp@epiphyte.org, pmenzel@molgen.mpg.de, buczek@molgen.mpg.de, Robert Marko <robert.marko@sartura.hr>, Andy Shevchenko <andy.shevchenko@gmail.com> Subject: [PATCH v6 2/6] gpio: Add Delta TN48M CPLD GPIO driver Date: Mon, 7 Jun 2021 14:33:13 +0200 [thread overview] Message-ID: <20210607123317.3242031-2-robert.marko@sartura.hr> (raw) In-Reply-To: <20210607123317.3242031-1-robert.marko@sartura.hr> Delta TN48M CPLD is used as a GPIO expander for the SFP GPIOs. It is a mix of input only and output only pins. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> --- Changes in v6: * Drop unused header * Return the return value of device_property_read_u32() instead of a hardcoded return Changes in v2: * Rewrite to use simple I2C MFD and GPIO regmap * Drop DT bindings for pin numbering drivers/gpio/Kconfig | 12 ++++++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-tn48m.c | 88 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 101 insertions(+) create mode 100644 drivers/gpio/gpio-tn48m.c diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index e3607ec4c2e8..472f7764508e 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1310,6 +1310,18 @@ config GPIO_TIMBERDALE help Add support for the GPIO IP in the timberdale FPGA. +config GPIO_TN48M_CPLD + tristate "Delta Networks TN48M switch CPLD GPIO driver" + depends on MFD_TN48M_CPLD + select GPIO_REGMAP + help + This enables support for the GPIOs found on the Delta + Networks TN48M switch CPLD. + They are used for inputs and outputs on the SFP slots. + + This driver can also be built as a module. If so, the + module will be called gpio-tn48m. + config GPIO_TPS65086 tristate "TI TPS65086 GPO" depends on MFD_TPS65086 diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index c58a90a3c3b1..271fb806475e 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -145,6 +145,7 @@ obj-$(CONFIG_GPIO_TEGRA186) += gpio-tegra186.o obj-$(CONFIG_GPIO_TEGRA) += gpio-tegra.o obj-$(CONFIG_GPIO_THUNDERX) += gpio-thunderx.o obj-$(CONFIG_GPIO_TIMBERDALE) += gpio-timberdale.o +obj-$(CONFIG_GPIO_TN48M_CPLD) += gpio-tn48m.o obj-$(CONFIG_GPIO_TPIC2810) += gpio-tpic2810.o obj-$(CONFIG_GPIO_TPS65086) += gpio-tps65086.o obj-$(CONFIG_GPIO_TPS65218) += gpio-tps65218.o diff --git a/drivers/gpio/gpio-tn48m.c b/drivers/gpio/gpio-tn48m.c new file mode 100644 index 000000000000..b12a6b4bc4b3 --- /dev/null +++ b/drivers/gpio/gpio-tn48m.c @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Delta TN48M CPLD GPIO driver + * + * Copyright (C) 2021 Sartura Ltd. + * + * Author: Robert Marko <robert.marko@sartura.hr> + */ + +#include <linux/device.h> +#include <linux/gpio/driver.h> +#include <linux/gpio/regmap.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +enum tn48m_gpio_type { + TN48M_SFP_TX_DISABLE = 1, + TN48M_SFP_PRESENT, + TN48M_SFP_LOS, +}; + +static int tn48m_gpio_probe(struct platform_device *pdev) +{ + struct gpio_regmap_config config = {0}; + enum tn48m_gpio_type type; + struct regmap *regmap; + u32 base; + int ret; + + if (!pdev->dev.parent) + return -ENODEV; + + type = (uintptr_t)device_get_match_data(&pdev->dev); + if (!type) + return -ENODEV; + + ret = device_property_read_u32(&pdev->dev, "reg", &base); + if (ret) + return ret; + + regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!regmap) + return -ENODEV; + + config.regmap = regmap; + config.parent = &pdev->dev; + config.ngpio = 4; + + switch (type) { + case TN48M_SFP_TX_DISABLE: + config.reg_set_base = base; + break; + case TN48M_SFP_PRESENT: + config.reg_dat_base = base; + break; + case TN48M_SFP_LOS: + config.reg_dat_base = base; + break; + default: + dev_err(&pdev->dev, "unknown type %d\n", type); + return -ENODEV; + } + + return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(&pdev->dev, &config)); +} + +static const struct of_device_id tn48m_gpio_of_match[] = { + { .compatible = "delta,tn48m-gpio-sfp-tx-disable", .data = (void *)TN48M_SFP_TX_DISABLE }, + { .compatible = "delta,tn48m-gpio-sfp-present", .data = (void *)TN48M_SFP_PRESENT }, + { .compatible = "delta,tn48m-gpio-sfp-los", .data = (void *)TN48M_SFP_LOS }, + { } +}; +MODULE_DEVICE_TABLE(of, tn48m_gpio_of_match); + +static struct platform_driver tn48m_gpio_driver = { + .driver = { + .name = "delta-tn48m-gpio", + .of_match_table = tn48m_gpio_of_match, + }, + .probe = tn48m_gpio_probe, +}; +module_platform_driver(tn48m_gpio_driver); + +MODULE_AUTHOR("Robert Marko <robert.marko@sartura.hr>"); +MODULE_DESCRIPTION("Delta TN48M CPLD GPIO driver"); +MODULE_LICENSE("GPL"); -- 2.31.1
next prev parent reply other threads:[~2021-06-07 12:34 UTC|newest] Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-07 12:33 [PATCH v6 1/6] mfd: simple-mfd-i2c: Add Delta TN48M CPLD support Robert Marko 2021-06-07 12:33 ` Robert Marko [this message] 2021-06-07 12:33 ` [PATCH v6 3/6] dt-bindings: reset: Add Delta TN48M Robert Marko 2021-06-07 12:33 ` [PATCH v6 4/6] reset: Add Delta TN48M CPLD reset controller Robert Marko 2021-06-07 12:33 ` [PATCH v6 5/6] dt-bindings: mfd: Add Delta TN48M CPLD drivers bindings Robert Marko 2021-06-25 11:46 ` Robert Marko 2021-07-13 22:25 ` Rob Herring 2021-07-18 9:15 ` Robert Marko 2021-07-19 10:46 ` Lee Jones 2021-07-19 22:59 ` Rob Herring 2021-07-21 14:16 ` Linus Walleij 2021-08-03 19:22 ` Robert Marko 2021-08-11 12:17 ` Linus Walleij 2021-08-24 8:03 ` Robert Marko 2021-09-07 21:02 ` Robert Marko 2021-09-25 14:47 ` Robert Marko 2021-10-03 22:48 ` Linus Walleij 2021-10-12 16:31 ` Robert Marko 2021-10-19 1:40 ` Andrew Lunn 2021-10-19 10:49 ` Robert Marko 2021-10-19 2:05 ` Andrew Lunn 2021-10-19 10:54 ` Robert Marko 2021-06-07 12:33 ` [PATCH v6 6/6] MAINTAINERS: Add Delta Networks TN48M CPLD drivers Robert Marko
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210607123317.3242031-2-robert.marko@sartura.hr \ --to=robert.marko@sartura.hr \ --cc=andy.shevchenko@gmail.com \ --cc=bgolaszewski@baylibre.com \ --cc=buczek@molgen.mpg.de \ --cc=devicetree@vger.kernel.org \ --cc=jmp@epiphyte.org \ --cc=lee.jones@linaro.org \ --cc=linus.walleij@linaro.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=luka.perkov@sartura.hr \ --cc=p.zabel@pengutronix.de \ --cc=pmenzel@molgen.mpg.de \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).