LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Harini Katakam <harini.katakam@xilinx.com>
To: <robh+dt@kernel.org>, <andrew@lunn.ch>, <hkallweit1@gmail.com>,
<linux@armlinux.org.uk>, <davem@davemloft.net>, <kuba@kernel.org>,
<steen.hegelund@microchip.com>, <bjarni.jonasson@microchip.com>,
<ioana.ciornei@nxp.com>, <likaige@loongson.cn>,
<harini.katakam@xilinx.com>
Cc: <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <harinikatakamlinux@gmail.com>,
<michal.simek@xilinx.com>, <radhey.shyam.pandey@xilinx.com>
Subject: [PATCH 3/3] phy: mscc: Add support for VSC8531_02 with RGMII tuning
Date: Tue, 29 Jun 2021 15:10:38 +0530 [thread overview]
Message-ID: <20210629094038.18610-4-harini.katakam@xilinx.com> (raw)
In-Reply-To: <20210629094038.18610-1-harini.katakam@xilinx.com>
Add support for VSC8531_02 (Rev 2) device.
Add support for optional RGMII RX and TX delay tuning via devicetree.
The hierarchy is:
- Retain the defaul 0.2ns delay when RGMII tuning is not set.
- Retain the default 2ns delay when RGMII tuning is set and DT delay
property is NOT specified.
- Use the DT delay value when RGMII tuning is set and a DT delay
property is specified.
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
drivers/net/phy/mscc/mscc.h | 3 +++
drivers/net/phy/mscc/mscc_main.c | 41 ++++++++++++++++++++++++++++++--
2 files changed, 42 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/mscc/mscc.h b/drivers/net/phy/mscc/mscc.h
index a50235fdf7d9..5a26eba0ace0 100644
--- a/drivers/net/phy/mscc/mscc.h
+++ b/drivers/net/phy/mscc/mscc.h
@@ -281,6 +281,7 @@ enum rgmii_clock_delay {
#define PHY_ID_VSC8514 0x00070670
#define PHY_ID_VSC8530 0x00070560
#define PHY_ID_VSC8531 0x00070570
+#define PHY_ID_VSC8531_02 0x00070572
#define PHY_ID_VSC8540 0x00070760
#define PHY_ID_VSC8541 0x00070770
#define PHY_ID_VSC8552 0x000704e0
@@ -373,6 +374,8 @@ struct vsc8531_private {
* package.
*/
unsigned int base_addr;
+ u32 rx_delay;
+ u32 tx_delay;
#if IS_ENABLED(CONFIG_MACSEC)
/* MACsec fields:
diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c
index 6e32da28e138..2b501824c802 100644
--- a/drivers/net/phy/mscc/mscc_main.c
+++ b/drivers/net/phy/mscc/mscc_main.c
@@ -535,15 +535,16 @@ static int vsc85xx_rgmii_set_skews(struct phy_device *phydev, u32 rgmii_cntl,
u16 rgmii_tx_delay_pos = ffs(rgmii_tx_delay_mask) - 1;
u16 reg_val = 0;
int rc;
+ struct vsc8531_private *vsc8531 = phydev->priv;
mutex_lock(&phydev->lock);
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID ||
phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
- reg_val |= RGMII_CLK_DELAY_2_0_NS << rgmii_rx_delay_pos;
+ reg_val |= vsc8531->rx_delay << rgmii_rx_delay_pos;
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID ||
phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
- reg_val |= RGMII_CLK_DELAY_2_0_NS << rgmii_tx_delay_pos;
+ reg_val |= vsc8531->tx_delay << rgmii_tx_delay_pos;
rc = phy_modify_paged(phydev, MSCC_PHY_PAGE_EXTENDED_2,
rgmii_cntl,
@@ -1820,6 +1821,17 @@ static int vsc85xx_config_init(struct phy_device *phydev)
{
int rc, i, phy_id;
struct vsc8531_private *vsc8531 = phydev->priv;
+ struct device_node *of_node = phydev->mdio.dev.of_node;
+
+ rc = of_property_read_u32(of_node, "vsc8531,rx-delay",
+ &vsc8531->rx_delay);
+ if (rc < 0)
+ vsc8531->rx_delay = RGMII_CLK_DELAY_2_0_NS;
+
+ rc = of_property_read_u32(of_node, "vsc8531,tx-delay",
+ &vsc8531->tx_delay);
+ if (rc < 0)
+ vsc8531->tx_delay = RGMII_CLK_DELAY_2_0_NS;
rc = vsc85xx_default_config(phydev);
if (rc)
@@ -2444,6 +2456,30 @@ static struct phy_driver vsc85xx_driver[] = {
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
},
+{
+ .phy_id = PHY_ID_VSC8531_02,
+ .name = "Microsemi VSC8531-02",
+ .phy_id_mask = 0xfffffff0,
+ /* PHY_GBIT_FEATURES */
+ .soft_reset = &genphy_soft_reset,
+ .config_init = &vsc85xx_config_init,
+ .config_aneg = &vsc85xx_config_aneg,
+ .read_status = &vsc85xx_read_status,
+ .handle_interrupt = vsc85xx_handle_interrupt,
+ .config_intr = &vsc85xx_config_intr,
+ .suspend = &genphy_suspend,
+ .resume = &genphy_resume,
+ .probe = &vsc85xx_probe,
+ .set_wol = &vsc85xx_wol_set,
+ .get_wol = &vsc85xx_wol_get,
+ .get_tunable = &vsc85xx_get_tunable,
+ .set_tunable = &vsc85xx_set_tunable,
+ .read_page = &vsc85xx_phy_read_page,
+ .write_page = &vsc85xx_phy_write_page,
+ .get_sset_count = &vsc85xx_get_sset_count,
+ .get_strings = &vsc85xx_get_strings,
+ .get_stats = &vsc85xx_get_stats,
+},
{
.phy_id = PHY_ID_VSC8540,
.name = "Microsemi FE VSC8540 SyncE",
@@ -2668,6 +2704,7 @@ static struct mdio_device_id __maybe_unused vsc85xx_tbl[] = {
{ PHY_ID_VSC8514, 0xfffffff0, },
{ PHY_ID_VSC8530, 0xfffffff0, },
{ PHY_ID_VSC8531, 0xfffffff0, },
+ { PHY_ID_VSC8531_02, 0xfffffff0, },
{ PHY_ID_VSC8540, 0xfffffff0, },
{ PHY_ID_VSC8541, 0xfffffff0, },
{ PHY_ID_VSC8552, 0xfffffff0, },
--
2.17.1
next prev parent reply other threads:[~2021-06-29 9:41 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-29 9:40 [PATCH 0/3] Add support for VSC8531_02 PHY and DT " Harini Katakam
2021-06-29 9:40 ` [PATCH 1/3] include: dt-bindings: Add mscc-vsc8531 RGMII clock delay definitions Harini Katakam
2021-06-29 13:58 ` Andrew Lunn
2021-06-29 9:40 ` [PATCH 2/3] dt-bindings: mscc: Add RGMII RX and TX delay tuning Harini Katakam
2021-06-29 14:07 ` Andrew Lunn
2021-06-29 14:11 ` Harini Katakam
2021-07-14 21:08 ` Rob Herring
2021-08-17 10:16 ` Harini Katakam
2021-06-29 9:40 ` Harini Katakam [this message]
2021-06-29 10:41 ` [PATCH 3/3] phy: mscc: Add support for VSC8531_02 with RGMII tuning Heiner Kallweit
2021-06-29 14:19 ` Harini Katakam
2021-06-29 14:11 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210629094038.18610-4-harini.katakam@xilinx.com \
--to=harini.katakam@xilinx.com \
--cc=andrew@lunn.ch \
--cc=bjarni.jonasson@microchip.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=harinikatakamlinux@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=ioana.ciornei@nxp.com \
--cc=kuba@kernel.org \
--cc=likaige@loongson.cn \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=michal.simek@xilinx.com \
--cc=radhey.shyam.pandey@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=steen.hegelund@microchip.com \
--subject='Re: [PATCH 3/3] phy: mscc: Add support for VSC8531_02 with RGMII tuning' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).