LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Vinod Koul <vkoul@kernel.org>
To: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Vinod Koul <vkoul@kernel.org>, David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel@ffwll.ch>,
	Jonathan Marek <jonathan@marek.ca>,
	Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
	Abhinav Kumar <abhinavk@codeaurora.org>,
	Jeffrey Hugo <jeffrey.l.hugo@gmail.com>,
	Sumit Semwal <sumit.semwal@linaro.org>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	freedreno@lists.freedesktop.org
Subject: [PATCH 10/11] drm/msm/dsi: Add support for DSC configuration
Date: Thu, 15 Jul 2021 12:22:02 +0530	[thread overview]
Message-ID: <20210715065203.709914-11-vkoul@kernel.org> (raw)
In-Reply-To: <20210715065203.709914-1-vkoul@kernel.org>

When DSC is enabled, we need to configure DSI registers accordingly and
configure the respective stream compression registers.

Add support to calculate the register setting based on DSC params and
timing information and configure these registers.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/gpu/drm/msm/dsi/dsi.xml.h  |  10 ++
 drivers/gpu/drm/msm/dsi/dsi_host.c | 142 +++++++++++++++++++++++++++--
 2 files changed, 142 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi.xml.h b/drivers/gpu/drm/msm/dsi/dsi.xml.h
index 50eb4d1b8fdd..b8e9e608abfc 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.xml.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.xml.h
@@ -2310,4 +2310,14 @@ static inline uint32_t REG_DSI_7nm_PHY_LN_TX_DCTRL(uint32_t i0) { return 0x00000
 
 #define REG_DSI_7nm_PHY_PLL_PERF_OPTIMIZE			0x00000260
 
+#define REG_DSI_VIDEO_COMPRESSION_MODE_CTRL			0x0000029c
+
+#define REG_DSI_VIDEO_COMPRESSION_MODE_CTRL2			0x000002a0
+
+#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL			0x000002a4
+
+#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2			0x000002a8
+
+#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL3			0x000002ac
+
 #endif /* DSI_XML */
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index e1e5d91809b5..4e8ab1b1df8b 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -942,6 +942,26 @@ static void dsi_ctrl_config(struct msm_dsi_host *msm_host, bool enable,
 	dsi_write(msm_host, REG_DSI_CTRL, data);
 }
 
+static int dsi_dsc_update_pic_dim(struct msm_display_dsc_config *dsc,
+				  int pic_width, int pic_height)
+{
+	if (!dsc || !pic_width || !pic_height) {
+		pr_err("DSI: invalid input: pic_width: %d pic_height: %d\n", pic_width, pic_height);
+		return -EINVAL;
+	}
+
+	if ((pic_width % dsc->drm->slice_width) || (pic_height % dsc->drm->slice_height)) {
+		pr_err("DSI: pic_dim %dx%d has to be multiple of slice %dx%d\n",
+		       pic_width, pic_height, dsc->drm->slice_width, dsc->drm->slice_height);
+		return -EINVAL;
+	}
+
+	dsc->drm->pic_width = pic_width;
+	dsc->drm->pic_height = pic_height;
+
+	return 0;
+}
+
 static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_dual_dsi)
 {
 	struct drm_display_mode *mode = msm_host->mode;
@@ -956,6 +976,7 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_dual_dsi)
 	u32 va_end = va_start + mode->vdisplay;
 	u32 hdisplay = mode->hdisplay;
 	u32 wc;
+	u32 data;
 
 	DBG("");
 
@@ -974,7 +995,73 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_dual_dsi)
 		hdisplay /= 2;
 	}
 
+	if (msm_host->dsc) {
+		struct msm_display_dsc_config *dsc = msm_host->dsc;
+
+		/* update dsc params with timing params */
+		dsi_dsc_update_pic_dim(dsc, mode->hdisplay, mode->vdisplay);
+		DBG("Mode Width- %d x Height %d\n", dsc->drm->pic_width, dsc->drm->pic_height);
+
+		/* we do the calculations for dsc parameters here so that
+		 * panel can use these parameters
+		 */
+		dsi_populate_dsc_params(dsc);
+
+		/* Divide the display by 3 but keep back/font porch and
+		 * pulse width same
+		 */
+		h_total -= hdisplay;
+		hdisplay /= 3;
+		h_total += hdisplay;
+		ha_end = ha_start + hdisplay;
+	}
+
 	if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO) {
+		if (msm_host->dsc) {
+			struct msm_display_dsc_config *dsc = msm_host->dsc;
+			u32 reg, intf_width, slice_per_intf, width;
+			u32 total_bytes_per_intf;
+
+			/* first calculate dsc parameters and then program
+			 * compress mode registers
+			 */
+			intf_width = hdisplay;
+			slice_per_intf = DIV_ROUND_UP(intf_width, dsc->drm->slice_width);
+
+			/* If slice_count > slice_per_intf, then use 1
+			 * This can happen during partial update
+			 */
+				dsc->drm->slice_count = 1;
+
+			dsc->bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width * 8, 8);
+			total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
+
+			dsc->eol_byte_num = total_bytes_per_intf % 3;
+			dsc->pclk_per_line =  DIV_ROUND_UP(total_bytes_per_intf, 3);
+			dsc->bytes_per_pkt = dsc->bytes_in_slice * dsc->drm->slice_count;
+			dsc->pkt_per_line = slice_per_intf / dsc->drm->slice_count;
+
+			width = dsc->pclk_per_line;
+			reg = dsc->bytes_per_pkt << 16;
+			reg |= (0x0b << 8);    /* dtype of compressed image */
+
+			/* pkt_per_line:
+			 * 0 == 1 pkt
+			 * 1 == 2 pkt
+			 * 2 == 4 pkt
+			 * 3 pkt is not supported
+			 * above translates to ffs() - 1
+			 */
+			reg |= (ffs(dsc->pkt_per_line) - 1) << 6;
+
+			dsc->eol_byte_num = total_bytes_per_intf % 3;
+			reg |= dsc->eol_byte_num << 4;
+			reg |= 1;
+
+			dsi_write(msm_host,
+				  REG_DSI_VIDEO_COMPRESSION_MODE_CTRL, reg);
+		}
+
 		dsi_write(msm_host, REG_DSI_ACTIVE_H,
 			DSI_ACTIVE_H_START(ha_start) |
 			DSI_ACTIVE_H_END(ha_end));
@@ -993,19 +1080,50 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_dual_dsi)
 			DSI_ACTIVE_VSYNC_VPOS_START(vs_start) |
 			DSI_ACTIVE_VSYNC_VPOS_END(vs_end));
 	} else {		/* command mode */
+		if (msm_host->dsc) {
+			struct msm_display_dsc_config *dsc = msm_host->dsc;
+			u32 reg, reg_ctrl, reg_ctrl2;
+			u32 slice_per_intf, bytes_in_slice, total_bytes_per_intf;
+
+			reg_ctrl = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL);
+			reg_ctrl2 = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2);
+
+			slice_per_intf = DIV_ROUND_UP(hdisplay, dsc->drm->slice_width);
+			bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width *
+						      dsc->drm->bits_per_pixel, 8);
+			dsc->drm->slice_chunk_size = bytes_in_slice;
+			total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
+			dsc->pkt_per_line = slice_per_intf / dsc->drm->slice_count;
+
+			reg = 0x39 << 8;
+			reg |= ffs(dsc->pkt_per_line) << 6;
+
+			dsc->eol_byte_num = total_bytes_per_intf % 3;
+			reg |= dsc->eol_byte_num << 4;
+			reg |= 1;
+
+			reg_ctrl |= reg;
+			reg_ctrl2 |= bytes_in_slice;
+
+			dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL, reg);
+			dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2, reg_ctrl2);
+		}
+
 		/* image data and 1 byte write_memory_start cmd */
-		wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
+		if (!msm_host->dsc)
+			wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
+		else
+			wc = mode->hdisplay / 2 + 1;
 
-		dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_CTRL,
-			DSI_CMD_MDP_STREAM0_CTRL_WORD_COUNT(wc) |
-			DSI_CMD_MDP_STREAM0_CTRL_VIRTUAL_CHANNEL(
-					msm_host->channel) |
-			DSI_CMD_MDP_STREAM0_CTRL_DATA_TYPE(
-					MIPI_DSI_DCS_LONG_WRITE));
+		data = DSI_CMD_MDP_STREAM0_CTRL_WORD_COUNT(wc) |
+		       DSI_CMD_MDP_STREAM0_CTRL_VIRTUAL_CHANNEL(msm_host->channel) |
+			DSI_CMD_MDP_STREAM0_CTRL_DATA_TYPE(MIPI_DSI_DCS_LONG_WRITE);
 
-		dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_TOTAL,
-			DSI_CMD_MDP_STREAM0_TOTAL_H_TOTAL(hdisplay) |
-			DSI_CMD_MDP_STREAM0_TOTAL_V_TOTAL(mode->vdisplay));
+		dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_CTRL, data);
+
+		data = DSI_CMD_MDP_STREAM0_TOTAL_H_TOTAL(hdisplay) |
+			DSI_CMD_MDP_STREAM0_TOTAL_V_TOTAL(mode->vdisplay);
+		dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_TOTAL, data);
 	}
 }
 
@@ -2074,6 +2192,7 @@ int msm_dsi_host_modeset_init(struct mipi_dsi_host *host,
 	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
 	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
 	struct platform_device *pdev = msm_host->pdev;
+	struct msm_drm_private *priv;
 	int ret;
 
 	msm_host->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
@@ -2093,6 +2212,9 @@ int msm_dsi_host_modeset_init(struct mipi_dsi_host *host,
 	}
 
 	msm_host->dev = dev;
+	priv = dev->dev_private;
+	priv->dsc = msm_host->dsc;
+
 	ret = cfg_hnd->ops->tx_buf_alloc(msm_host, SZ_4K);
 	if (ret) {
 		pr_err("%s: alloc tx gem obj failed, %d\n", __func__, ret);
-- 
2.31.1


  parent reply	other threads:[~2021-07-15  6:53 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-15  6:51 [PATCH 00/11] drm/msm: Add Display Stream Compression Support Vinod Koul
2021-07-15  6:51 ` [PATCH 01/11] drm/msm/dsi: add support for dsc data Vinod Koul
2021-08-02 22:55   ` [Freedreno] " abhinavk
2021-10-06  5:24     ` Vinod Koul
2021-07-15  6:51 ` [PATCH 02/11] drm/msm/disp/dpu1: Add support for DSC Vinod Koul
2021-07-19  8:28   ` kernel test robot
2021-08-02 23:03   ` [Freedreno] " abhinavk
2021-10-06  5:36     ` Vinod Koul
2021-07-15  6:51 ` [PATCH 03/11] drm/msm/disp/dpu1: Add support for DSC in pingpong block Vinod Koul
2021-08-02 23:07   ` [Freedreno] " abhinavk
2021-07-15  6:51 ` [PATCH 04/11] drm/msm/disp/dpu1: Add DSC support in RM Vinod Koul
2021-07-29 20:23   ` Dmitry Baryshkov
2021-10-06 10:26     ` Vinod Koul
2021-08-02 23:24   ` [Freedreno] " abhinavk
2021-10-06 10:27     ` Vinod Koul
2021-07-15  6:51 ` [PATCH 05/11] drm/msm/disp/dpu1: Add DSC for SDM845 to hw_catalog Vinod Koul
2021-07-29 20:25   ` Dmitry Baryshkov
2021-10-06 10:50     ` Vinod Koul
2021-08-02 23:29   ` [Freedreno] " abhinavk
2021-10-06 10:52     ` Vinod Koul
2021-07-15  6:51 ` [PATCH 06/11] drm/msm/disp/dpu1: Add DSC support in hw_ctl Vinod Koul
2021-07-29 22:15   ` Dmitry Baryshkov
2021-10-06 12:21     ` Vinod Koul
2021-08-03  0:00   ` [Freedreno] " abhinavk
2021-10-06 12:21     ` Vinod Koul
2021-07-15  6:51 ` [PATCH 07/11] drm/msm/disp/dpu1: Don't use DSC with mode_3d Vinod Koul
2021-08-03  0:24   ` [Freedreno] " abhinavk
2021-10-06 12:22     ` Vinod Koul
2021-07-15  6:52 ` [PATCH 08/11] drm/msm/disp/dpu1: Add support for DSC in encoder Vinod Koul
2021-07-19  8:54   ` kernel test robot
2021-07-29 20:54   ` Dmitry Baryshkov
2021-10-06 12:43     ` Vinod Koul
2021-08-03  0:57   ` [Freedreno] " abhinavk
2021-10-06 12:47     ` Vinod Koul
2021-07-15  6:52 ` [PATCH 09/11] drm/msm/disp/dpu1: Add support for DSC in topology Vinod Koul
2021-08-03  1:05   ` [Freedreno] " abhinavk
2021-07-15  6:52 ` Vinod Koul [this message]
2021-07-29 22:10   ` [PATCH 10/11] drm/msm/dsi: Add support for DSC configuration Dmitry Baryshkov
2021-08-03  1:16   ` [Freedreno] " abhinavk
2021-07-15  6:52 ` [PATCH 11/11] drm/msm/dsi: Pass DSC params to drm_panel Vinod Koul
2021-08-03  1:22   ` [Freedreno] " abhinavk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210715065203.709914-11-vkoul@kernel.org \
    --to=vkoul@kernel.org \
    --cc=abhinavk@codeaurora.org \
    --cc=airlied@linux.ie \
    --cc=bjorn.andersson@linaro.org \
    --cc=daniel@ffwll.ch \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=jeffrey.l.hugo@gmail.com \
    --cc=jonathan@marek.ca \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robdclark@gmail.com \
    --cc=sumit.semwal@linaro.org \
    --subject='Re: [PATCH 10/11] drm/msm/dsi: Add support for DSC configuration' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).