LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH 0/2] arm64: dts: allwinner: h6: tanix-tx6: Enable eMMC
@ 2021-07-21 20:08 Jernej Skrabec
  2021-07-21 20:08 ` [PATCH 1/2] arm64: dts: allwinner: h6: tanix-tx6: Add PIO power supplies Jernej Skrabec
  2021-07-21 20:08 ` [PATCH 2/2] arm64: dts: allwinner: h6: tanix-tx6: enable emmc Jernej Skrabec
  0 siblings, 2 replies; 4+ messages in thread
From: Jernej Skrabec @ 2021-07-21 20:08 UTC (permalink / raw)
  To: mripard, wens
  Cc: robh+dt, jernej.skrabec, devicetree, linux-arm-kernel,
	linux-sunxi, linux-kernel

Tanix TX6 box has a 32 GB eMMC module. With changes in this series, I
get following figures with hdparm -tT:

/dev/mmcblk2:
 Timing cached reads:   1638 MB in  2.00 seconds = 818.44 MB/sec
 Timing buffered disk reads: 376 MB in  3.01 seconds = 124.74 MB/sec

First patch only sets proper power supplies to GPIO banks and second
adds eMMC support.

Please take a look.

Best regards,
Jernej Skrabec

Jernej Skrabec (2):
  arm64: dts: allwinner: h6: tanix-tx6: Add PIO power supplies
  arm64: dts: allwinner: h6: tanix-tx6: enable emmc

 .../dts/allwinner/sun50i-h6-tanix-tx6.dts     | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

-- 
2.32.0


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2021-07-22  8:21 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-21 20:08 [PATCH 0/2] arm64: dts: allwinner: h6: tanix-tx6: Enable eMMC Jernej Skrabec
2021-07-21 20:08 ` [PATCH 1/2] arm64: dts: allwinner: h6: tanix-tx6: Add PIO power supplies Jernej Skrabec
2021-07-22  8:21   ` Maxime Ripard
2021-07-21 20:08 ` [PATCH 2/2] arm64: dts: allwinner: h6: tanix-tx6: enable emmc Jernej Skrabec

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).