LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Jason Lai <jasonlai.genesyslogic@gmail.com>
To: ulf.hansson@linaro.org, adrian.hunter@intel.com
Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
ben.chuang@genesyslogic.com.tw, greg.tu@genesyslogic.com.tw,
jason.lai@genesyslogiv.com.tw,
AKASHI Takahiro <takahiro.akashi@linaro.org>
Subject: [RFC PATCH v3.2 18/29] mmc: sdhci-uhs2: add clock operations
Date: Thu, 22 Jul 2021 12:01:13 +0800 [thread overview]
Message-ID: <20210722040124.7573-18-jasonlai.genesyslogic@gmail.com> (raw)
In-Reply-To: <20210722040124.7573-1-jasonlai.genesyslogic@gmail.com>
This is a sdhci version of mmc's uhs2_[enable|disable]_clk operations.
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
drivers/mmc/host/sdhci-uhs2.c | 41 +++++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
index 994dff967e85..55362ace1857 100644
--- a/drivers/mmc/host/sdhci-uhs2.c
+++ b/drivers/mmc/host/sdhci-uhs2.c
@@ -11,6 +11,7 @@
*/
#include <linux/delay.h>
+#include <linux/ktime.h>
#include <linux/module.h>
#include "sdhci.h"
@@ -385,6 +386,42 @@ void sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
__sdhci_uhs2_set_ios(mmc, ios);
}
+static void sdhci_uhs2_disable_clk(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ u16 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+
+ clk &= ~SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+}
+
+static void sdhci_uhs2_enable_clk(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ u16 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ ktime_t timeout;
+
+ clk |= SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ /* Wait max 20 ms */
+ timeout = ktime_add_ms(ktime_get(), 20);
+ while (1) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ if (clk & SDHCI_CLOCK_INT_STABLE)
+ break;
+ if (timedout) {
+ pr_err("%s: Internal clock never stabilised.\n",
+ mmc_hostname(host->mmc));
+ sdhci_dumpregs(host);
+ return;
+ }
+ udelay(10);
+ }
+}
+
/*****************************************************************************\
* *
* Driver init/exit *
@@ -556,6 +593,10 @@ static int sdhci_uhs2_host_ops_init(struct sdhci_host *host)
if (!host->mmc_host_ops.uhs2_detect_init)
host->mmc_host_ops.uhs2_detect_init = sdhci_uhs2_do_detect_init;
+ if (!host->mmc_host_ops.uhs2_disable_clk)
+ host->mmc_host_ops.uhs2_disable_clk = sdhci_uhs2_disable_clk;
+ if (!host->mmc_host_ops.uhs2_enable_clk)
+ host->mmc_host_ops.uhs2_enable_clk = sdhci_uhs2_enable_clk;
return 0;
}
--
2.32.0
next prev parent reply other threads:[~2021-07-22 4:03 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-22 4:00 [RFC PATCH v3.2 01/29] mmc: add UHS-II related definitions in public headers Jason Lai
2021-07-22 4:00 ` [RFC PATCH v3.2 02/29] mmc: core: UHS-II support, modify power-up sequence Jason Lai
2021-07-22 4:00 ` [RFC PATCH v3.2 03/29] mmc: core: UHS-II support, skip set_chip_select() Jason Lai
2021-07-22 4:00 ` [RFC PATCH v3.2 04/29] mmc: core: UHS-II support, try to select UHS-II interface Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 05/29] mmc: core: UHS-II support, skip TMODE setup in some cases Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 06/29] mmc: core: UHS-II support, generate UHS-II SD command packet Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 07/29] mmc: core: UHS-II support, set APP_CMD bit if necessary Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 08/29] mmc: sdhci: add a kernel configuration for enabling UHS-II support Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 09/29] mmc: sdhci: add UHS-II related definitions in headers Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 10/29] mmc: sdhci: add UHS-II module Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 11/29] mmc: sdhci-uhs2: dump UHS-II registers Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 12/29] mmc: sdhci-uhs2: add reset function Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 13/29] mmc: sdhci-uhs2: add set_power() to support vdd2 Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 14/29] mmc: sdhci-uhs2: skip signal_voltage_switch() Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 15/29] mmc: sdhci-uhs2: add set_timeout() Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 16/29] mmc: sdhci-uhs2: add set_ios() Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 17/29] mmc: sdhci-uhs2: add detect_init() to detect the interface Jason Lai
2021-07-22 4:01 ` Jason Lai [this message]
2021-07-22 4:01 ` [RFC PATCH v3.2 19/29] mmc: sdhci-uhs2: add set_reg() to initialise " Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 20/29] mmc: sdhci-uhs2: add request() and others Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 21/29] mmc: sdhci-uhs2: add irq() " Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 22/29] mmc: sdhci-uhs2: add add_host() and others to set up the driver Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 23/29] mmc: sdhci-uhs2: add pre-detect_init hook Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 24/29] mmc: core: add post-mmc_attach_sd hook Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 25/29] mmc: sdhci-uhs2: " Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 26/29] mmc: sdhci-pci: add UHS-II support framework Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 27/29] mmc: sdhci-pci-gli: enable UHS-II mode for GL9755 Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 28/29] mmc: Remove duplicate code Jason Lai
2021-07-22 4:01 ` [RFC PATCH v3.2 29/29] mmc: core: Apply Ulf's patch for supporting UHS-II card Jason Lai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210722040124.7573-18-jasonlai.genesyslogic@gmail.com \
--to=jasonlai.genesyslogic@gmail.com \
--cc=adrian.hunter@intel.com \
--cc=ben.chuang@genesyslogic.com.tw \
--cc=greg.tu@genesyslogic.com.tw \
--cc=jason.lai@genesyslogiv.com.tw \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=takahiro.akashi@linaro.org \
--cc=ulf.hansson@linaro.org \
--subject='Re: [RFC PATCH v3.2 18/29] mmc: sdhci-uhs2: add clock operations' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).