[RFC PATCH v3.2 28/29] mmc: Remove duplicate code.

[Jason Lai <jasonlai.genesyslogic@gmail.com>]

1. core.c : Use tab to replace space.
2. sdhci.c: Remove code which had been moved into sdhci_request_done_dma()

Signed-off-by: Jason Lai <jason.lai@genesyslogic.com.tw>
---
 drivers/mmc/core/core.c  |  2 +-
 drivers/mmc/host/sdhci.c | 74 ----------------------------------------
 2 files changed, 1 insertion(+), 75 deletions(-)

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index d53722c21f29..2624d7b30cd2 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2248,7 +2248,7 @@ void mmc_rescan(struct work_struct *work)
 	if (mmc_card_sd_express(host)) {
 		mmc_release_host(host);
 		goto out;
-        }
+	}

 	if (host->caps & MMC_CAP_UHS2) {
 		/*
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 5356cd5f4907..ae8e3b5a38bf 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -3155,83 +3155,9 @@ bool sdhci_request_done(struct sdhci_host *host)
 			sdhci_set_mrq_done(host, mrq);
 		}

-		if (data && data->host_cookie == COOKIE_MAPPED) {
-			if (host->bounce_buffer) {
-				/*
-				 * On reads, copy the bounced data into the
-				 * sglist
-				 */
-				if (mmc_get_dma_dir(data) == DMA_FROM_DEVICE) {
-					unsigned int length = data->bytes_xfered;
-
-					if (length > host->bounce_buffer_size) {
-						pr_err("%s: bounce buffer is %u bytes but DMA claims to have transferred %u bytes\n",
-						       mmc_hostname(host->mmc),
-						       host->bounce_buffer_size,
-						       data->bytes_xfered);
-						/* Cap it down and continue */
-						length = host->bounce_buffer_size;
-					}
-					dma_sync_single_for_cpu(
-						mmc_dev(host->mmc),
-						host->bounce_addr,
-						host->bounce_buffer_size,
-						DMA_FROM_DEVICE);
-					sg_copy_from_buffer(data->sg,
-						data->sg_len,
-						host->bounce_buffer,
-						length);
-				} else {
-					/* No copying, just switch ownership */
-					dma_sync_single_for_cpu(
-						mmc_dev(host->mmc),
-						host->bounce_addr,
-						host->bounce_buffer_size,
-						mmc_get_dma_dir(data));
-				}
-			} else {
-				/* Unmap the raw data */
-				dma_unmap_sg(mmc_dev(host->mmc), data->sg,
-					     data->sg_len,
-					     mmc_get_dma_dir(data));
-			}
-			data->host_cookie = COOKIE_UNMAPPED;
-		}
-
 		sdhci_request_done_dma(host, mrq);
 	}

-	/*
-	 * The controller needs a reset of internal state machines
-	 * upon error conditions.
-	 */
-	if (sdhci_needs_reset(host, mrq)) {
-		/*
-		 * Do not finish until command and data lines are available for
-		 * reset. Note there can only be one other mrq, so it cannot
-		 * also be in mrqs_done, otherwise host->cmd and host->data_cmd
-		 * would both be null.
-		 */
-		if (host->cmd || host->data_cmd) {
-			spin_unlock_irqrestore(&host->lock, flags);
-			return true;
-		}
-
-		/* Some controllers need this kick or reset won't work here */
-		if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET)
-			/* This is to force an update */
-			host->ops->set_clock(host, host->clock);
-
-		/*
-		 * Spec says we should do both at the same time, but
-		 * Ricoh controllers do not like that.
-		 */
-		sdhci_do_reset(host, SDHCI_RESET_CMD);
-		sdhci_do_reset(host, SDHCI_RESET_DATA);
-
-		host->pending_reset = false;
-	}
-
 	host->mrqs_done[i] = NULL;

 	spin_unlock_irqrestore(&host->lock, flags);
--
2.32.0