LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Emil Renner Berthing <kernel@esmil.dk>
To: Lee Jones <lee.jones@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>,
	devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/4] power: reset: Add TPS65086 restart driver
Date: Tue, 27 Jul 2021 11:25:53 +0200	[thread overview]
Message-ID: <20210727092554.1059305-4-kernel@esmil.dk> (raw)
In-Reply-To: <20210727092554.1059305-1-kernel@esmil.dk>

The only way to reset the BeagleV Starlight v0.9 board[1] properly is to
tell the PMIC to reset itself which will then assert the external reset
lines of the SoC, USB hub and ethernet phy.

This adds a driver to register a reset handler to do just that.

[1] https://github.com/beagleboard/beaglev-starlight

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/reset/Kconfig            |  6 ++
 drivers/power/reset/Makefile           |  1 +
 drivers/power/reset/tps65086-restart.c | 98 ++++++++++++++++++++++++++
 3 files changed, 105 insertions(+)
 create mode 100644 drivers/power/reset/tps65086-restart.c

diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 4d1192062508..4b563db3ab3e 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -204,6 +204,12 @@ config POWER_RESET_ST
 	help
 	  Reset support for STMicroelectronics boards.
 
+config POWER_RESET_TPS65086
+	bool "TPS65086 restart driver"
+	depends on MFD_TPS65086
+	help
+	  This driver adds support for resetting the TPS65086 PMIC on restart.
+
 config POWER_RESET_VERSATILE
 	bool "ARM Versatile family reboot driver"
 	depends on ARM
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index cf3f4d02d8a5..f606a2f60539 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
 obj-$(CONFIG_POWER_RESET_REGULATOR) += regulator-poweroff.o
 obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
 obj-$(CONFIG_POWER_RESET_ST) += st-poweroff.o
+obj-$(CONFIG_POWER_RESET_TPS65086) += tps65086-restart.o
 obj-$(CONFIG_POWER_RESET_VERSATILE) += arm-versatile-reboot.o
 obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o
 obj-$(CONFIG_POWER_RESET_XGENE) += xgene-reboot.o
diff --git a/drivers/power/reset/tps65086-restart.c b/drivers/power/reset/tps65086-restart.c
new file mode 100644
index 000000000000..78b89f745a3d
--- /dev/null
+++ b/drivers/power/reset/tps65086-restart.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Emil Renner Berthing
+ */
+
+#include <linux/mfd/tps65086.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+
+struct tps65086_restart {
+	struct notifier_block handler;
+	struct device *dev;
+};
+
+static int tps65086_restart_notify(struct notifier_block *this,
+				   unsigned long mode, void *cmd)
+{
+	struct tps65086_restart *tps65086_restart =
+		container_of(this, struct tps65086_restart, handler);
+	struct tps65086 *tps65086 = dev_get_drvdata(tps65086_restart->dev->parent);
+	int ret;
+
+	ret = regmap_write(tps65086->regmap, TPS65086_FORCESHUTDN, 1);
+	if (ret) {
+		dev_err(tps65086_restart->dev, "%s: error writing to tps65086 pmic: %d\n",
+			__func__, ret);
+		return NOTIFY_DONE;
+	}
+
+	/* give it a little time */
+	mdelay(200);
+
+	WARN_ON(1);
+
+	return NOTIFY_DONE;
+}
+
+static int tps65086_restart_probe(struct platform_device *pdev)
+{
+	struct tps65086_restart *tps65086_restart;
+	int ret;
+
+	tps65086_restart = devm_kzalloc(&pdev->dev, sizeof(*tps65086_restart), GFP_KERNEL);
+	if (!tps65086_restart)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, tps65086_restart);
+
+	tps65086_restart->handler.notifier_call = tps65086_restart_notify;
+	tps65086_restart->handler.priority = 192;
+	tps65086_restart->dev = &pdev->dev;
+
+	ret = register_restart_handler(&tps65086_restart->handler);
+	if (ret) {
+		dev_err(&pdev->dev, "%s: cannot register restart handler: %d\n",
+			__func__, ret);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int tps65086_restart_remove(struct platform_device *pdev)
+{
+	struct tps65086_restart *tps65086_restart = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = unregister_restart_handler(&tps65086_restart->handler);
+	if (ret) {
+		dev_err(&pdev->dev, "%s: cannot unregister restart handler: %d\n",
+			__func__, ret);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id tps65086_restart_id_table[] = {
+	{ "tps65086-reset", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, tps65086_restart_id_table);
+
+static struct platform_driver tps65086_restart_driver = {
+	.driver = {
+		.name = "tps65086-restart",
+	},
+	.probe = tps65086_restart_probe,
+	.remove = tps65086_restart_remove,
+	.id_table = tps65086_restart_id_table,
+};
+module_platform_driver(tps65086_restart_driver);
+
+MODULE_AUTHOR("Emil Renner Berthing <kernel@esmil.dk>");
+MODULE_DESCRIPTION("TPS65086 restart driver");
+MODULE_LICENSE("GPL v2");
-- 
2.32.0


  parent reply	other threads:[~2021-07-27  9:26 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-27  9:25 [PATCH v2 0/4] BeagleV Starlight reset support Emil Renner Berthing
2021-07-27  9:25 ` [PATCH v2 1/4] dt-bindings: mfd: convert tps65086.txt to YAML Emil Renner Berthing
2021-08-02 19:43   ` Rob Herring
2021-08-16 12:40   ` Lee Jones
2021-07-27  9:25 ` [PATCH v2 2/4] mfd: tps65086: Make interrupt line optional Emil Renner Berthing
2021-08-16 12:40   ` Lee Jones
2021-07-27  9:25 ` Emil Renner Berthing [this message]
2021-08-16 13:13   ` [PATCH v2 3/4] power: reset: Add TPS65086 restart driver Sebastian Reichel
2021-07-27  9:25 ` [PATCH v2 4/4] mfd: tps65086: Add cell entry for reset driver Emil Renner Berthing
2021-08-16 12:41   ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210727092554.1059305-4-kernel@esmil.dk \
    --to=kernel@esmil.dk \
    --cc=devicetree@vger.kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sebastian.reichel@collabora.com \
    --subject='Re: [PATCH v2 3/4] power: reset: Add TPS65086 restart driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).