LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Swapnil Jakhade <sjakhade@cadence.com>
To: <vkoul@kernel.org>, <kishon@ti.com>, <p.zabel@pengutronix.de>,
	<linux-phy@lists.infradead.org>, <linux-kernel@vger.kernel.org>
Cc: <mparab@cadence.com>, <sjakhade@cadence.com>, <lokeshvutla@ti.com>
Subject: [PATCH v3 3/9] phy: cadence-torrent: Add enum for supported input reference clock frequencies
Date: Wed, 28 Jul 2021 16:54:48 +0200	[thread overview]
Message-ID: <20210728145454.15945-4-sjakhade@cadence.com> (raw)
In-Reply-To: <20210728145454.15945-1-sjakhade@cadence.com>

Torrent PHY supports different input reference clock frequencies.
Register configurations will be different based on reference clock value.
Prepare driver to support such multiple reference clock frequencies.

Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/cadence/phy-cadence-torrent.c | 51 +++++++++++++++++------
 1 file changed, 38 insertions(+), 13 deletions(-)

diff --git a/drivers/phy/cadence/phy-cadence-torrent.c b/drivers/phy/cadence/phy-cadence-torrent.c
index 4b2d6d3eace9..f746553c8089 100644
--- a/drivers/phy/cadence/phy-cadence-torrent.c
+++ b/drivers/phy/cadence/phy-cadence-torrent.c
@@ -26,11 +26,13 @@
 
 #define REF_CLK_19_2MHZ		19200000
 #define REF_CLK_25MHZ		25000000
+#define REF_CLK_100MHZ		100000000
 
 #define MAX_NUM_LANES		4
 #define DEFAULT_MAX_BIT_RATE	8100 /* in Mbps */
 
 #define NUM_SSC_MODE		3
+#define NUM_REF_CLK		3
 #define NUM_PHY_TYPE		6
 
 #define POLL_TIMEOUT_US		5000
@@ -273,6 +275,12 @@ enum cdns_torrent_phy_type {
 	TYPE_USB,
 };
 
+enum cdns_torrent_ref_clk {
+	CLK_19_2_MHZ,
+	CLK_25_MHZ,
+	CLK_100_MHZ
+};
+
 enum cdns_torrent_ssc_mode {
 	NO_SSC,
 	EXTERNAL_SSC,
@@ -296,7 +304,7 @@ struct cdns_torrent_phy {
 	struct reset_control *apb_rst;
 	struct device *dev;
 	struct clk *clk;
-	unsigned long ref_clk_rate;
+	enum cdns_torrent_ref_clk ref_clk_rate;
 	struct cdns_torrent_inst phys[MAX_NUM_LANES];
 	int nsubnodes;
 	const struct cdns_torrent_data *init_data;
@@ -960,10 +968,10 @@ static void cdns_torrent_dp_pma_lane_cfg(struct cdns_torrent_phy *cdns_phy,
 					 unsigned int lane)
 {
 	/* Per lane, refclock-dependent receiver detection setting */
-	if (cdns_phy->ref_clk_rate == REF_CLK_19_2MHZ)
+	if (cdns_phy->ref_clk_rate == CLK_19_2_MHZ)
 		cdns_torrent_phy_write(cdns_phy->regmap_tx_lane_cdb[lane],
 				       TX_RCVDET_ST_TMR, 0x0780);
-	else if (cdns_phy->ref_clk_rate == REF_CLK_25MHZ)
+	else if (cdns_phy->ref_clk_rate == CLK_25_MHZ)
 		cdns_torrent_phy_write(cdns_phy->regmap_tx_lane_cdb[lane],
 				       TX_RCVDET_ST_TMR, 0x09C4);
 
@@ -1004,10 +1012,10 @@ static void cdns_torrent_dp_pma_cfg(struct cdns_torrent_phy *cdns_phy,
 {
 	unsigned int i;
 
-	if (cdns_phy->ref_clk_rate == REF_CLK_19_2MHZ)
+	if (cdns_phy->ref_clk_rate == CLK_19_2_MHZ)
 		/* PMA common configuration 19.2MHz */
 		cdns_torrent_dp_pma_cmn_cfg_19_2mhz(cdns_phy);
-	else if (cdns_phy->ref_clk_rate == REF_CLK_25MHZ)
+	else if (cdns_phy->ref_clk_rate == CLK_25_MHZ)
 		/* PMA common configuration 25MHz */
 		cdns_torrent_dp_pma_cmn_cfg_25mhz(cdns_phy);
 
@@ -1254,12 +1262,12 @@ static int cdns_torrent_dp_configure_rate(struct cdns_torrent_phy *cdns_phy,
 	ndelay(200);
 
 	/* DP Rate Change - VCO Output settings. */
-	if (cdns_phy->ref_clk_rate == REF_CLK_19_2MHZ) {
+	if (cdns_phy->ref_clk_rate == CLK_19_2_MHZ) {
 		/* PMA common configuration 19.2MHz */
 		cdns_torrent_dp_pma_cmn_vco_cfg_19_2mhz(cdns_phy, dp->link_rate,
 							dp->ssc);
 		cdns_torrent_dp_pma_cmn_cfg_19_2mhz(cdns_phy);
-	} else if (cdns_phy->ref_clk_rate == REF_CLK_25MHZ) {
+	} else if (cdns_phy->ref_clk_rate == CLK_25_MHZ) {
 		/* PMA common configuration 25MHz */
 		cdns_torrent_dp_pma_cmn_vco_cfg_25mhz(cdns_phy, dp->link_rate,
 						      dp->ssc);
@@ -1602,8 +1610,8 @@ static int cdns_torrent_dp_init(struct phy *phy)
 	struct regmap *regmap = cdns_phy->regmap_dptx_phy_reg;
 
 	switch (cdns_phy->ref_clk_rate) {
-	case REF_CLK_19_2MHZ:
-	case REF_CLK_25MHZ:
+	case CLK_19_2_MHZ:
+	case CLK_25_MHZ:
 		/* Valid Ref Clock Rate */
 		break;
 	default:
@@ -1635,11 +1643,11 @@ static int cdns_torrent_dp_init(struct phy *phy)
 
 	/* PHY PMA registers configuration functions */
 	/* Initialize PHY with max supported link rate, without SSC. */
-	if (cdns_phy->ref_clk_rate == REF_CLK_19_2MHZ)
+	if (cdns_phy->ref_clk_rate == CLK_19_2_MHZ)
 		cdns_torrent_dp_pma_cmn_vco_cfg_19_2mhz(cdns_phy,
 							cdns_phy->max_bit_rate,
 							false);
-	else if (cdns_phy->ref_clk_rate == REF_CLK_25MHZ)
+	else if (cdns_phy->ref_clk_rate == CLK_25_MHZ)
 		cdns_torrent_dp_pma_cmn_vco_cfg_25mhz(cdns_phy,
 						      cdns_phy->max_bit_rate,
 						      false);
@@ -2255,6 +2263,7 @@ static int cdns_torrent_reset(struct cdns_torrent_phy *cdns_phy)
 static int cdns_torrent_clk(struct cdns_torrent_phy *cdns_phy)
 {
 	struct device *dev = cdns_phy->dev;
+	unsigned long ref_clk_rate;
 	int ret;
 
 	cdns_phy->clk = devm_clk_get(dev, "refclk");
@@ -2269,13 +2278,29 @@ static int cdns_torrent_clk(struct cdns_torrent_phy *cdns_phy)
 		return ret;
 	}
 
-	cdns_phy->ref_clk_rate = clk_get_rate(cdns_phy->clk);
-	if (!(cdns_phy->ref_clk_rate)) {
+	ref_clk_rate = clk_get_rate(cdns_phy->clk);
+	if (!ref_clk_rate) {
 		dev_err(cdns_phy->dev, "Failed to get ref clock rate\n");
 		clk_disable_unprepare(cdns_phy->clk);
 		return -EINVAL;
 	}
 
+	switch (ref_clk_rate) {
+	case REF_CLK_19_2MHZ:
+		cdns_phy->ref_clk_rate = CLK_19_2_MHZ;
+		break;
+	case REF_CLK_25MHZ:
+		cdns_phy->ref_clk_rate = CLK_25_MHZ;
+		break;
+	case REF_CLK_100MHZ:
+		cdns_phy->ref_clk_rate = CLK_100_MHZ;
+		break;
+	default:
+		dev_err(cdns_phy->dev, "Invalid Ref Clock Rate\n");
+		clk_disable_unprepare(cdns_phy->clk);
+		return -EINVAL;
+	}
+
 	return 0;
 }
 
-- 
2.26.1


  parent reply	other threads:[~2021-07-28 14:55 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-28 14:54 [PATCH v3 0/9] PHY: Prepare Cadence Torrent PHY driver to support multilink DP Swapnil Jakhade
2021-07-28 14:54 ` [PATCH v3 1/9] phy: cadence-torrent: Remove use of CamelCase to fix checkpatch CHECK message Swapnil Jakhade
2021-07-28 14:54 ` [PATCH v3 2/9] phy: cadence-torrent: Reorder few functions to remove function declarations Swapnil Jakhade
2021-07-28 14:54 ` Swapnil Jakhade [this message]
2021-07-28 14:54 ` [PATCH v3 4/9] phy: cadence-torrent: Configure PHY registers as a function of input reference clock rate Swapnil Jakhade
2021-07-28 14:54 ` [PATCH v3 5/9] phy: cadence-torrent: Add PHY registers for DP in array format Swapnil Jakhade
2021-07-28 14:54 ` [PATCH v3 6/9] phy: cadence-torrent: Add PHY configuration for DP with 100MHz ref clock Swapnil Jakhade
2021-07-28 14:54 ` [PATCH v3 7/9] phy: cadence-torrent: Add separate functions for reusable code Swapnil Jakhade
2021-07-28 14:54 ` [PATCH v3 8/9] phy: cadence-torrent: Add debug information for PHY configuration Swapnil Jakhade
2021-07-28 14:54 ` [PATCH v3 9/9] phy: cadence-torrent: Check PIPE mode PHY status to be ready for operation Swapnil Jakhade
2021-08-17 10:12 ` [PATCH v3 0/9] PHY: Prepare Cadence Torrent PHY driver to support multilink DP Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210728145454.15945-4-sjakhade@cadence.com \
    --to=sjakhade@cadence.com \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=lokeshvutla@ti.com \
    --cc=mparab@cadence.com \
    --cc=p.zabel@pengutronix.de \
    --cc=vkoul@kernel.org \
    --subject='Re: [PATCH v3 3/9] phy: cadence-torrent: Add enum for supported input reference clock frequencies' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).