LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Samuel Holland <samuel@sholland.org>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>,
	Rob Herring <robh+dt@kernel.org>,
	Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev, linux-watchdog@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/3] watchdog: sunxi_wdt: Add support for D1
Date: Wed, 28 Jul 2021 21:11:39 -0700	[thread overview]
Message-ID: <20210729041139.GA1715506@roeck-us.net> (raw)
In-Reply-To: <20210726035143.53132-3-samuel@sholland.org>

On Sun, Jul 25, 2021 at 10:51:43PM -0500, Samuel Holland wrote:
> D1 adds a key field to the "CFG" and "MODE" registers, that must be set
> to change the other bits. Add logic to set the key when updating those
> registers.
> 
> Signed-off-by: Samuel Holland <samuel@sholland.org>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>  drivers/watchdog/sunxi_wdt.c | 20 +++++++++++++++++++-
>  1 file changed, 19 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/watchdog/sunxi_wdt.c b/drivers/watchdog/sunxi_wdt.c
> index b50757882a98..6cf82922d3fb 100644
> --- a/drivers/watchdog/sunxi_wdt.c
> +++ b/drivers/watchdog/sunxi_wdt.c
> @@ -48,6 +48,7 @@ struct sunxi_wdt_reg {
>  	u8 wdt_timeout_shift;
>  	u8 wdt_reset_mask;
>  	u8 wdt_reset_val;
> +	u32 wdt_key_val;
>  };
>  
>  struct sunxi_wdt_dev {
> @@ -91,12 +92,14 @@ static int sunxi_wdt_restart(struct watchdog_device *wdt_dev,
>  	val = readl(wdt_base + regs->wdt_cfg);
>  	val &= ~(regs->wdt_reset_mask);
>  	val |= regs->wdt_reset_val;
> +	val |= regs->wdt_key_val;
>  	writel(val, wdt_base + regs->wdt_cfg);
>  
>  	/* Set lowest timeout and enable watchdog */
>  	val = readl(wdt_base + regs->wdt_mode);
>  	val &= ~(WDT_TIMEOUT_MASK << regs->wdt_timeout_shift);
>  	val |= WDT_MODE_EN;
> +	val |= regs->wdt_key_val;
>  	writel(val, wdt_base + regs->wdt_mode);
>  
>  	/*
> @@ -109,6 +112,7 @@ static int sunxi_wdt_restart(struct watchdog_device *wdt_dev,
>  		mdelay(5);
>  		val = readl(wdt_base + regs->wdt_mode);
>  		val |= WDT_MODE_EN;
> +		val |= regs->wdt_key_val;
>  		writel(val, wdt_base + regs->wdt_mode);
>  	}
>  	return 0;
> @@ -141,6 +145,7 @@ static int sunxi_wdt_set_timeout(struct watchdog_device *wdt_dev,
>  	reg = readl(wdt_base + regs->wdt_mode);
>  	reg &= ~(WDT_TIMEOUT_MASK << regs->wdt_timeout_shift);
>  	reg |= wdt_timeout_map[timeout] << regs->wdt_timeout_shift;
> +	reg |= regs->wdt_key_val;
>  	writel(reg, wdt_base + regs->wdt_mode);
>  
>  	sunxi_wdt_ping(wdt_dev);
> @@ -154,7 +159,7 @@ static int sunxi_wdt_stop(struct watchdog_device *wdt_dev)
>  	void __iomem *wdt_base = sunxi_wdt->wdt_base;
>  	const struct sunxi_wdt_reg *regs = sunxi_wdt->wdt_regs;
>  
> -	writel(0, wdt_base + regs->wdt_mode);
> +	writel(regs->wdt_key_val, wdt_base + regs->wdt_mode);
>  
>  	return 0;
>  }
> @@ -176,11 +181,13 @@ static int sunxi_wdt_start(struct watchdog_device *wdt_dev)
>  	reg = readl(wdt_base + regs->wdt_cfg);
>  	reg &= ~(regs->wdt_reset_mask);
>  	reg |= regs->wdt_reset_val;
> +	reg |= regs->wdt_key_val;
>  	writel(reg, wdt_base + regs->wdt_cfg);
>  
>  	/* Enable watchdog */
>  	reg = readl(wdt_base + regs->wdt_mode);
>  	reg |= WDT_MODE_EN;
> +	reg |= regs->wdt_key_val;
>  	writel(reg, wdt_base + regs->wdt_mode);
>  
>  	return 0;
> @@ -220,9 +227,20 @@ static const struct sunxi_wdt_reg sun6i_wdt_reg = {
>  	.wdt_reset_val = 0x01,
>  };
>  
> +static const struct sunxi_wdt_reg sun20i_wdt_reg = {
> +	.wdt_ctrl = 0x10,
> +	.wdt_cfg = 0x14,
> +	.wdt_mode = 0x18,
> +	.wdt_timeout_shift = 4,
> +	.wdt_reset_mask = 0x03,
> +	.wdt_reset_val = 0x01,
> +	.wdt_key_val = 0x16aa0000,
> +};
> +
>  static const struct of_device_id sunxi_wdt_dt_ids[] = {
>  	{ .compatible = "allwinner,sun4i-a10-wdt", .data = &sun4i_wdt_reg },
>  	{ .compatible = "allwinner,sun6i-a31-wdt", .data = &sun6i_wdt_reg },
> +	{ .compatible = "allwinner,sun20i-d1-wdt", .data = &sun20i_wdt_reg },
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, sunxi_wdt_dt_ids);

  reply	other threads:[~2021-07-29  4:11 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-26  3:51 [PATCH 1/3] dt-bindings: watchdog: sunxi: Add compatible for R329 Samuel Holland
2021-07-26  3:51 ` [PATCH 2/3] dt-bindings: watchdog: sunxi: Add compatible for D1 Samuel Holland
2021-07-29  4:24   ` Guenter Roeck
2021-07-29 22:39     ` Rob Herring
2021-07-30  1:14       ` Guenter Roeck
2021-07-29 22:40   ` Rob Herring
2021-07-26  3:51 ` [PATCH 3/3] watchdog: sunxi_wdt: Add support " Samuel Holland
2021-07-29  4:11   ` Guenter Roeck [this message]
2021-07-29 12:18 ` [PATCH 1/3] dt-bindings: watchdog: sunxi: Add compatible for R329 Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210729041139.GA1715506@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=devicetree@vger.kernel.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=mripard@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=samuel@sholland.org \
    --cc=wens@csie.org \
    --cc=wim@linux-watchdog.org \
    --subject='Re: [PATCH 3/3] watchdog: sunxi_wdt: Add support for D1' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).