LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH v2 0/3] Add RTC for MStar SoCs
@ 2021-08-01 16:09 Romain Perier
  2021-08-01 16:09 ` [PATCH v2 1/3] dt-bindings: rtc: Add Mstar MSC313e RTC devicetree bindings documentation Romain Perier
                   ` (2 more replies)
  0 siblings, 3 replies; 10+ messages in thread
From: Romain Perier @ 2021-08-01 16:09 UTC (permalink / raw)
  To: Alessandro Zummo, Alexandre Belloni, Daniel Palmer, Rob Herring
  Cc: linux-rtc, devicetree, linux-kernel, linux-arm-kernel

This patches series adds a new driver for the RTC found in the Mstar
MSC313e SoCs and newer. It adds a basic rtc driver, the corresponding
devicetree bindings and its documentation.

The rtctest (from selftests) has been passed on this driver, with the
following output:
$ rtctest 
TAP version 13
1..7
# Starting 7 tests from 2 test cases.
#  RUN           rtc.date_read ...
# rtctest.c:47:date_read:Current RTC date/time is 01/01/1970 00:02:03.
#            OK  rtc.date_read
ok 1 rtc.date_read
#  RUN           rtc.uie_read ...
#            OK  rtc.uie_read
ok 2 rtc.uie_read
#  RUN           rtc.uie_select ...
#            OK  rtc.uie_select
ok 3 rtc.uie_select
#  RUN           rtc.alarm_alm_set ...
# rtctest.c:136:alarm_alm_set:Alarm time now set to 00:02:12.
# rtctest.c:156:alarm_alm_set:data: 1a0
#            OK  rtc.alarm_alm_set
ok 4 rtc.alarm_alm_set
#  RUN           rtc.alarm_wkalm_set ...
# rtctest.c:192:alarm_wkalm_set:Alarm time now set to 01/01/1970 00:02:15.
#            OK  rtc.alarm_wkalm_set
ok 5 rtc.alarm_wkalm_set
#  RUN           rtc.alarm_alm_set_minute ...
# rtctest.c:238:alarm_alm_set_minute:Alarm time now set to 00:03:00.
# rtctest.c:258:alarm_alm_set_minute:data: 1a0
#            OK  rtc.alarm_alm_set_minute
ok 6 [  180.545015] random: fast init done
rtc.alarm_alm_set_minute
#  RUN           rtc.alarm_wkalm_set_minute ...
# rtctest.c:294:alarm_wkalm_set_minute:Alarm time now set to 01/01/1970 00:04:00.
#            OK  rtc.alarm_wkalm_set_minute
ok 7 rtc.alarm_wkalm_set_minute
# PASSED: 7 / 7 tests passed.
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0


Changes since v1:
- Fixed the DT bindings documentation and fixed dt_binding_check (an
  include was missing)
- Added || COMPILE_TEST to kconfig
- Removed rtc_valid_tm from msc313_rtc_read_time()
- Removed the last write of the msc313_rtc_set_time() function (not
  required) and improved comments
- Replaced the relaxed io by normal io in msc313_rtc_interrupt()
- Added checks to be sure that the alarm fired in msc313_rtc_interrupt()
- Removed msc313_rtc_remove() (replaced by devm_add_action_or_reset)
- Removed unnecessary software reset of the IP in the probe function
  (the soft reset is never executed, it is a mistake from the initial
  refactoring)
- Switched to devm_rtc_allocate_device() and devm_rtc_register_device(),
  and dropped the error message related to the rtc device allocation
- Added an RTC range by setting .range_min and .range_max
- Added the "start-year" property to the DT bindings documentation


Daniel Palmer (1):
  rtc: Add support for the MSTAR MSC313 RTC

Romain Perier (2):
  dt-bindings: rtc: Add Mstar MSC313e RTC devicetree bindings
    documentation
  ARM: dts: mstar: Add rtc device node

 .../bindings/rtc/mstar,msc313-rtc.yaml        |  49 ++++
 MAINTAINERS                                   |   1 +
 arch/arm/boot/dts/mstar-v7.dtsi               |   7 +
 drivers/rtc/Kconfig                           |  10 +
 drivers/rtc/Makefile                          |   1 +
 drivers/rtc/rtc-msc313.c                      | 246 ++++++++++++++++++
 6 files changed, 314 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml
 create mode 100644 drivers/rtc/rtc-msc313.c

-- 
2.30.2


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 1/3] dt-bindings: rtc: Add Mstar MSC313e RTC devicetree bindings documentation
  2021-08-01 16:09 [PATCH v2 0/3] Add RTC for MStar SoCs Romain Perier
@ 2021-08-01 16:09 ` Romain Perier
  2021-08-06 21:37   ` Rob Herring
  2021-08-01 16:09 ` [PATCH v2 2/3] rtc: Add support for the MSTAR MSC313 RTC Romain Perier
  2021-08-01 16:09 ` [PATCH v2 3/3] ARM: dts: mstar: Add rtc device node Romain Perier
  2 siblings, 1 reply; 10+ messages in thread
From: Romain Perier @ 2021-08-01 16:09 UTC (permalink / raw)
  To: Alessandro Zummo, Alexandre Belloni, Daniel Palmer, Rob Herring
  Cc: linux-rtc, devicetree, linux-kernel, linux-arm-kernel

This adds the documentation for the devicetree bindings of the Mstar
MSC313e RTC driver, found from MSC313e SoCs and newer.

Signed-off-by: Romain Perier <romain.perier@gmail.com>
---
 .../bindings/rtc/mstar,msc313-rtc.yaml        | 49 +++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml

diff --git a/Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml b/Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml
new file mode 100644
index 000000000000..62bc12b1feb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/mstar,msc313-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mstar MSC313e RTC Device Tree Bindings
+
+allOf:
+  - $ref: "rtc.yaml#"
+
+maintainers:
+  - Daniel Palmer <daniel@0x0f.com>
+  - Romain Perier <romain.perier@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - mstar,msc313-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  start-year: true
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    rtc@2400 {
+        compatible = "mstar,msc313-rtc";
+        reg = <0x2400 0x40>;
+        clocks = <&xtal_div2>;
+        interrupts-extended = <&intc_irq GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
-- 
2.30.2


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 2/3] rtc: Add support for the MSTAR MSC313 RTC
  2021-08-01 16:09 [PATCH v2 0/3] Add RTC for MStar SoCs Romain Perier
  2021-08-01 16:09 ` [PATCH v2 1/3] dt-bindings: rtc: Add Mstar MSC313e RTC devicetree bindings documentation Romain Perier
@ 2021-08-01 16:09 ` Romain Perier
  2021-08-06 19:38   ` Alexandre Belloni
  2021-08-01 16:09 ` [PATCH v2 3/3] ARM: dts: mstar: Add rtc device node Romain Perier
  2 siblings, 1 reply; 10+ messages in thread
From: Romain Perier @ 2021-08-01 16:09 UTC (permalink / raw)
  To: Alessandro Zummo, Alexandre Belloni, Daniel Palmer, Rob Herring
  Cc: linux-rtc, devicetree, linux-kernel, linux-arm-kernel

From: Daniel Palmer <daniel@0x0f.com>

This adds support for the RTC block on the Mstar MSC313e SoCs and newer.

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Co-developed-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Romain Perier <romain.perier@gmail.com>
---
 MAINTAINERS              |   1 +
 drivers/rtc/Kconfig      |  10 ++
 drivers/rtc/Makefile     |   1 +
 drivers/rtc/rtc-msc313.c | 246 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 258 insertions(+)
 create mode 100644 drivers/rtc/rtc-msc313.c

diff --git a/MAINTAINERS b/MAINTAINERS
index c9467d2839f5..bff16c7bafb8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2220,6 +2220,7 @@ F:	arch/arm/boot/dts/mstar-*
 F:	arch/arm/mach-mstar/
 F:	drivers/clk/mstar/
 F:	drivers/gpio/gpio-msc313.c
+F:	drivers/rtc/rtc-msc313.c
 F:	drivers/watchdog/msc313e_wdt.c
 F:	include/dt-bindings/clock/mstar-*
 F:	include/dt-bindings/gpio/msc313-gpio.h
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 12153d5801ce..9ce4baab5fcf 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1925,4 +1925,14 @@ config RTC_DRV_WILCO_EC
 	  This can also be built as a module. If so, the module will
 	  be named "rtc_wilco_ec".
 
+config RTC_DRV_MSC313
+	tristate "MStar MSC313 RTC"
+        depends on ARCH_MSTARV7 || COMPILE_TEST
+	help
+	  If you say yes here you get support for the Mstar MSC313e On-Chip
+	  Real Time Clock.
+
+	  This driver can also be built as a module, if so, the module
+	  will be called "rtc-msc313".
+
 endif # RTC_CLASS
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 2dd0dd956b0e..5efda8a60cee 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -101,6 +101,7 @@ obj-$(CONFIG_RTC_DRV_MCP795)	+= rtc-mcp795.o
 obj-$(CONFIG_RTC_DRV_MESON)	+= rtc-meson.o
 obj-$(CONFIG_RTC_DRV_MOXART)	+= rtc-moxart.o
 obj-$(CONFIG_RTC_DRV_MPC5121)	+= rtc-mpc5121.o
+obj-$(CONFIG_RTC_DRV_MSC313)	+= rtc-msc313.o
 obj-$(CONFIG_RTC_DRV_MSM6242)	+= rtc-msm6242.o
 obj-$(CONFIG_RTC_DRV_MT2712)	+= rtc-mt2712.o
 obj-$(CONFIG_RTC_DRV_MT6397)	+= rtc-mt6397.o
diff --git a/drivers/rtc/rtc-msc313.c b/drivers/rtc/rtc-msc313.c
new file mode 100644
index 000000000000..f7b9fd2807cb
--- /dev/null
+++ b/drivers/rtc/rtc-msc313.c
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Real time clocks driver for MStar/SigmaStar ARMv7 SoCs.
+ * Based on "Real Time Clock driver for msb252x." that was contained
+ * in various MStar kernels.
+ *
+ * (C) 2019 Daniel Palmer
+ * (C) 2021 Romain Perier
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+/* Registers */
+#define REG_RTC_CTRL		0x00
+#define REG_RTC_FREQ_CW_L	0x04
+#define REG_RTC_FREQ_CW_H	0x08
+#define REG_RTC_LOAD_VAL_L	0x0C
+#define REG_RTC_LOAD_VAL_H	0x10
+#define REG_RTC_MATCH_VAL_L	0x14
+#define REG_RTC_MATCH_VAL_H	0x18
+#define REG_RTC_STATUS_INT	0x1C
+#define REG_RTC_CNT_VAL_L	0x20
+#define REG_RTC_CNT_VAL_H	0x24
+
+/* Control bits for REG_RTC_CTRL */
+#define SOFT_RSTZ_BIT		BIT(0)
+#define CNT_EN_BIT		BIT(1)
+#define WRAP_EN_BIT		BIT(2)
+#define LOAD_EN_BIT		BIT(3)
+#define READ_EN_BIT		BIT(4)
+#define INT_MASK_BIT		BIT(5)
+#define INT_FORCE_BIT		BIT(6)
+#define INT_CLEAR_BIT		BIT(7)
+
+/* Control bits for REG_RTC_STATUS_INT */
+#define RAW_INT_BIT		BIT(0)
+#define ALM_INT_BIT		BIT(1)
+
+struct msc313_rtc {
+	struct rtc_device *rtc_dev;
+	void __iomem *rtc_base;
+	struct clk *clk;
+};
+
+static int msc313_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct msc313_rtc *priv = dev_get_drvdata(dev);
+	unsigned long seconds;
+
+	seconds = readw(priv->rtc_base + REG_RTC_MATCH_VAL_L)
+			| (readw(priv->rtc_base + REG_RTC_MATCH_VAL_H) << 16);
+
+	rtc_time64_to_tm(seconds, &alarm->time);
+
+	if (!(readw(priv->rtc_base + REG_RTC_CTRL) & INT_MASK_BIT))
+		alarm->enabled = 1;
+
+	return 0;
+}
+
+static int msc313_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct msc313_rtc *priv = dev_get_drvdata(dev);
+	u16 reg;
+
+	reg = readw(priv->rtc_base + REG_RTC_CTRL);
+	if (enabled)
+		reg &= ~INT_MASK_BIT;
+	else
+		reg |= INT_MASK_BIT;
+	writew(reg, priv->rtc_base + REG_RTC_CTRL);
+	return 0;
+}
+
+static int msc313_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct msc313_rtc *priv = dev_get_drvdata(dev);
+	unsigned long seconds;
+
+	seconds = rtc_tm_to_time64(&alarm->time);
+	writew((seconds & 0xFFFF), priv->rtc_base + REG_RTC_MATCH_VAL_L);
+	writew((seconds >> 16) & 0xFFFF, priv->rtc_base + REG_RTC_MATCH_VAL_H);
+
+	msc313_rtc_alarm_irq_enable(dev, alarm->enabled);
+
+	return 0;
+}
+
+static int msc313_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct msc313_rtc *priv = dev_get_drvdata(dev);
+	u32 seconds;
+	u16 reg;
+
+	reg = readw(priv->rtc_base + REG_RTC_CTRL);
+	writew(reg | READ_EN_BIT, priv->rtc_base + REG_RTC_CTRL);
+
+	/* Wait for HW latch done */
+	while (readw(priv->rtc_base + REG_RTC_CTRL) & READ_EN_BIT)
+		udelay(1);
+
+	seconds = readw(priv->rtc_base + REG_RTC_CNT_VAL_L)
+			| (readw(priv->rtc_base + REG_RTC_CNT_VAL_H) << 16);
+
+	rtc_time64_to_tm(seconds, tm);
+
+	return 0;
+}
+
+static int msc313_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct msc313_rtc *priv = dev_get_drvdata(dev);
+	unsigned long seconds;
+	u16 reg;
+
+	seconds = rtc_tm_to_time64(tm);
+	writew(seconds & 0xFFFF, priv->rtc_base + REG_RTC_LOAD_VAL_L);
+	writew((seconds >> 16) & 0xFFFF, priv->rtc_base + REG_RTC_LOAD_VAL_H);
+
+	/* Enable load for loading value into internal RTC counter */
+	reg = readw(priv->rtc_base + REG_RTC_CTRL);
+	writew(reg | LOAD_EN_BIT, priv->rtc_base + REG_RTC_CTRL);
+
+	/* Wait for HW latch done */
+	while (readw(priv->rtc_base + REG_RTC_CTRL) & LOAD_EN_BIT)
+		udelay(1);
+	return 0;
+}
+
+static const struct rtc_class_ops msc313_rtc_ops = {
+	.read_time = msc313_rtc_read_time,
+	.set_time = msc313_rtc_set_time,
+	.read_alarm = msc313_rtc_read_alarm,
+	.set_alarm = msc313_rtc_set_alarm,
+	.alarm_irq_enable = msc313_rtc_alarm_irq_enable,
+};
+
+static irqreturn_t msc313_rtc_interrupt(s32 irq, void *dev_id)
+{
+	struct msc313_rtc *priv = dev_get_drvdata(dev_id);
+	u16 reg;
+
+	reg = readw(priv->rtc_base + REG_RTC_STATUS_INT);
+	if (!(reg & ALM_INT_BIT))
+		return IRQ_NONE;
+
+	reg = readw(priv->rtc_base + REG_RTC_CTRL);
+	reg |= INT_CLEAR_BIT;
+	reg &= ~INT_FORCE_BIT;
+	writew(reg, priv->rtc_base + REG_RTC_CTRL);
+
+	rtc_update_irq(priv->rtc_dev, 1, RTC_IRQF | RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static int msc313_rtc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct msc313_rtc *priv;
+	int ret;
+	int irq;
+	unsigned long rate;
+	u16 reg;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(struct msc313_rtc), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->rtc_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->rtc_base))
+		return PTR_ERR(priv->rtc_base);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -EINVAL;
+
+	priv->rtc_dev = devm_rtc_allocate_device(dev);
+	if (IS_ERR(priv->rtc_dev))
+		return PTR_ERR(priv->rtc_dev);
+
+	priv->rtc_dev->ops = &msc313_rtc_ops;
+	priv->rtc_dev->range_min = RTC_TIMESTAMP_BEGIN_0000;
+	priv->rtc_dev->range_max = U32_MAX - 1; /* 2106-02-07 06:28:14 */
+
+	ret = devm_request_irq(dev, irq, msc313_rtc_interrupt, IRQF_SHARED,
+			       dev_name(&pdev->dev), &pdev->dev);
+	if (ret) {
+		dev_err(dev, "Could not request IRQ\n");
+		return ret;
+	}
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		dev_err(dev, "No input reference clock\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret) {
+		dev_err(dev, "Failed to enable the reference clock, %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(dev, (void (*) (void *))clk_disable_unprepare, priv->clk);
+	if (ret)
+		return ret;
+
+	rate = clk_get_rate(priv->clk);
+	writew(rate & 0xFFFF, priv->rtc_base + REG_RTC_FREQ_CW_L);
+	writew((rate >> 16) & 0xFFFF, priv->rtc_base + REG_RTC_FREQ_CW_H);
+
+	reg = readw(priv->rtc_base + REG_RTC_CTRL);
+	reg |= CNT_EN_BIT;
+	writew(reg, priv->rtc_base + REG_RTC_CTRL);
+
+	platform_set_drvdata(pdev, priv);
+
+	return devm_rtc_register_device(priv->rtc_dev);
+}
+
+static const struct of_device_id msc313_rtc_of_match_table[] = {
+	{ .compatible = "mstar,msc313-rtc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ms_rtc_of_match_table);
+
+static struct platform_driver msc313_rtc_driver = {
+	.probe = msc313_rtc_probe,
+	.driver = {
+		.name = "msc313-rtc",
+		.of_match_table = msc313_rtc_of_match_table,
+	},
+};
+
+module_platform_driver(msc313_rtc_driver);
+
+MODULE_AUTHOR("Daniel Palmer <daniel@thingy.jp>");
+MODULE_AUTHOR("Romain Perier <romain.perier@gmail.com>");
+MODULE_DESCRIPTION("MStar RTC Driver");
+MODULE_LICENSE("GPL v2");
-- 
2.30.2


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 3/3] ARM: dts: mstar: Add rtc device node
  2021-08-01 16:09 [PATCH v2 0/3] Add RTC for MStar SoCs Romain Perier
  2021-08-01 16:09 ` [PATCH v2 1/3] dt-bindings: rtc: Add Mstar MSC313e RTC devicetree bindings documentation Romain Perier
  2021-08-01 16:09 ` [PATCH v2 2/3] rtc: Add support for the MSTAR MSC313 RTC Romain Perier
@ 2021-08-01 16:09 ` Romain Perier
  2021-08-02 10:39   ` Daniel Palmer
  2 siblings, 1 reply; 10+ messages in thread
From: Romain Perier @ 2021-08-01 16:09 UTC (permalink / raw)
  To: Alessandro Zummo, Alexandre Belloni, Daniel Palmer, Rob Herring
  Cc: linux-rtc, devicetree, linux-kernel, linux-arm-kernel

This adds the definition of the rtc device node. The RTC being able to
work with the oscillator at 12Mhz for now, it shares the same xtal than
the watchdog.

Signed-off-by: Romain Perier <romain.perier@gmail.com>
---
 arch/arm/boot/dts/mstar-v7.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi
index 982dba9d28eb..1d4419aee67d 100644
--- a/arch/arm/boot/dts/mstar-v7.dtsi
+++ b/arch/arm/boot/dts/mstar-v7.dtsi
@@ -116,6 +116,13 @@ watchdog@6000 {
 				clocks = <&xtal_div2>;
 			};
 
+			rtc@2400 {
+				compatible = "mstar,msc313-rtc";
+				reg = <0x2400 0x40>;
+				clocks = <&xtal_div2>;
+				interrupts-extended = <&intc_irq GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			intc_fiq: interrupt-controller@201310 {
 				compatible = "mstar,mst-intc";
 				reg = <0x201310 0x40>;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 3/3] ARM: dts: mstar: Add rtc device node
  2021-08-01 16:09 ` [PATCH v2 3/3] ARM: dts: mstar: Add rtc device node Romain Perier
@ 2021-08-02 10:39   ` Daniel Palmer
  2021-08-19 16:22     ` Romain Perier
  0 siblings, 1 reply; 10+ messages in thread
From: Daniel Palmer @ 2021-08-02 10:39 UTC (permalink / raw)
  To: Romain Perier
  Cc: Alessandro Zummo, Alexandre Belloni, Rob Herring, linux-rtc,
	DTML, Linux Kernel Mailing List, linux-arm-kernel

Hi Romain,

On Mon, 2 Aug 2021 at 01:09, Romain Perier <romain.perier@gmail.com> wrote:
> +++ b/arch/arm/boot/dts/mstar-v7.dtsi
> @@ -116,6 +116,13 @@ watchdog@6000 {
>                                 clocks = <&xtal_div2>;
>                         };
>
> +                       rtc@2400 {

I think the rtc should be before the watchdog as the address is lower.
I think maybe this got flipped around during cherry-picking.
I can flip it around when I pull this into an mstar dts for 5.15
branch so you don't need to fix it and send a v3 assuming everything
else is ok.

Thanks,

Daniel

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 2/3] rtc: Add support for the MSTAR MSC313 RTC
  2021-08-01 16:09 ` [PATCH v2 2/3] rtc: Add support for the MSTAR MSC313 RTC Romain Perier
@ 2021-08-06 19:38   ` Alexandre Belloni
  2021-08-19 16:55     ` Romain Perier
  0 siblings, 1 reply; 10+ messages in thread
From: Alexandre Belloni @ 2021-08-06 19:38 UTC (permalink / raw)
  To: Romain Perier
  Cc: Alessandro Zummo, Daniel Palmer, Rob Herring, linux-rtc,
	devicetree, linux-kernel, linux-arm-kernel

Hello,

On 01/08/2021 18:09:20+0200, Romain Perier wrote:
> +static int msc313_rtc_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct msc313_rtc *priv;
> +	int ret;
> +	int irq;
> +	unsigned long rate;
> +	u16 reg;
> +
> +	priv = devm_kzalloc(&pdev->dev, sizeof(struct msc313_rtc), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	priv->rtc_base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(priv->rtc_base))
> +		return PTR_ERR(priv->rtc_base);
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0)
> +		return -EINVAL;
> +
> +	priv->rtc_dev = devm_rtc_allocate_device(dev);
> +	if (IS_ERR(priv->rtc_dev))
> +		return PTR_ERR(priv->rtc_dev);
> +
> +	priv->rtc_dev->ops = &msc313_rtc_ops;
> +	priv->rtc_dev->range_min = RTC_TIMESTAMP_BEGIN_0000;

I'm pretty sure this doesn't fit in this RTC registers, you should
probably leave range_min to 0 (i.e. not set it at all).

> +	priv->rtc_dev->range_max = U32_MAX - 1; /* 2106-02-07 06:28:14 */

I guess this one should be U32_MAX
> +
> +	ret = devm_request_irq(dev, irq, msc313_rtc_interrupt, IRQF_SHARED,
> +			       dev_name(&pdev->dev), &pdev->dev);
> +	if (ret) {
> +		dev_err(dev, "Could not request IRQ\n");
> +		return ret;
> +	}
> +
> +	priv->clk = devm_clk_get(dev, NULL);
> +	if (IS_ERR(priv->clk)) {
> +		dev_err(dev, "No input reference clock\n");
> +		return PTR_ERR(priv->clk);
> +	}
> +
> +	ret = clk_prepare_enable(priv->clk);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable the reference clock, %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = devm_add_action_or_reset(dev, (void (*) (void *))clk_disable_unprepare, priv->clk);
> +	if (ret)
> +		return ret;
> +
> +	rate = clk_get_rate(priv->clk);
> +	writew(rate & 0xFFFF, priv->rtc_base + REG_RTC_FREQ_CW_L);
> +	writew((rate >> 16) & 0xFFFF, priv->rtc_base + REG_RTC_FREQ_CW_H);
> +
> +	reg = readw(priv->rtc_base + REG_RTC_CTRL);
> +	reg |= CNT_EN_BIT;
> +	writew(reg, priv->rtc_base + REG_RTC_CTRL);
> +

If on POR, CNT_EN_BIT is not set, then it would be nice to use that to
know whether the RTC is properly set. You can then check CNT_EN_BIT in
.read_time and return -EINVAL if it is not set. Then you can set the bit
in .set_time. It is anyway useless to let the RTC running if it is not
set.

> +	platform_set_drvdata(pdev, priv);
> +
> +	return devm_rtc_register_device(priv->rtc_dev);
> +}
> +
> +static const struct of_device_id msc313_rtc_of_match_table[] = {
> +	{ .compatible = "mstar,msc313-rtc" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, ms_rtc_of_match_table);
> +
> +static struct platform_driver msc313_rtc_driver = {
> +	.probe = msc313_rtc_probe,
> +	.driver = {
> +		.name = "msc313-rtc",
> +		.of_match_table = msc313_rtc_of_match_table,
> +	},
> +};
> +
> +module_platform_driver(msc313_rtc_driver);
> +
> +MODULE_AUTHOR("Daniel Palmer <daniel@thingy.jp>");
> +MODULE_AUTHOR("Romain Perier <romain.perier@gmail.com>");
> +MODULE_DESCRIPTION("MStar RTC Driver");
> +MODULE_LICENSE("GPL v2");
> -- 
> 2.30.2
> 

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 1/3] dt-bindings: rtc: Add Mstar MSC313e RTC devicetree bindings documentation
  2021-08-01 16:09 ` [PATCH v2 1/3] dt-bindings: rtc: Add Mstar MSC313e RTC devicetree bindings documentation Romain Perier
@ 2021-08-06 21:37   ` Rob Herring
  2021-08-19 16:24     ` Romain Perier
  0 siblings, 1 reply; 10+ messages in thread
From: Rob Herring @ 2021-08-06 21:37 UTC (permalink / raw)
  To: Romain Perier
  Cc: Alessandro Zummo, Alexandre Belloni, Daniel Palmer, linux-rtc,
	devicetree, linux-kernel, linux-arm-kernel

On Sun, Aug 01, 2021 at 06:09:19PM +0200, Romain Perier wrote:
> This adds the documentation for the devicetree bindings of the Mstar
> MSC313e RTC driver, found from MSC313e SoCs and newer.
> 
> Signed-off-by: Romain Perier <romain.perier@gmail.com>
> ---
>  .../bindings/rtc/mstar,msc313-rtc.yaml        | 49 +++++++++++++++++++
>  1 file changed, 49 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml b/Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml
> new file mode 100644
> index 000000000000..62bc12b1feb6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml
> @@ -0,0 +1,49 @@
> +# SPDX-License-Identifier: GPL-2.0

As checkpatch.pl will tell you, should be dual licensed.

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/rtc/mstar,msc313-rtc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mstar MSC313e RTC Device Tree Bindings
> +
> +allOf:
> +  - $ref: "rtc.yaml#"
> +
> +maintainers:
> +  - Daniel Palmer <daniel@0x0f.com>
> +  - Romain Perier <romain.perier@gmail.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - mstar,msc313-rtc
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  start-year: true
> +
> +  clocks:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    rtc@2400 {
> +        compatible = "mstar,msc313-rtc";
> +        reg = <0x2400 0x40>;
> +        clocks = <&xtal_div2>;
> +        interrupts-extended = <&intc_irq GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> +    };
> +...
> -- 
> 2.30.2
> 
> 

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 3/3] ARM: dts: mstar: Add rtc device node
  2021-08-02 10:39   ` Daniel Palmer
@ 2021-08-19 16:22     ` Romain Perier
  0 siblings, 0 replies; 10+ messages in thread
From: Romain Perier @ 2021-08-19 16:22 UTC (permalink / raw)
  To: Daniel Palmer
  Cc: Alessandro Zummo, Alexandre Belloni, Rob Herring, linux-rtc,
	DTML, Linux Kernel Mailing List, linux-arm-kernel

Hi,

As I need to send a v3, I can fix it, no worries.

Cheers,
Romain

Le lun. 2 août 2021 à 12:40, Daniel Palmer <daniel@0x0f.com> a écrit :
>
> Hi Romain,
>
> On Mon, 2 Aug 2021 at 01:09, Romain Perier <romain.perier@gmail.com> wrote:
> > +++ b/arch/arm/boot/dts/mstar-v7.dtsi
> > @@ -116,6 +116,13 @@ watchdog@6000 {
> >                                 clocks = <&xtal_div2>;
> >                         };
> >
> > +                       rtc@2400 {
>
> I think the rtc should be before the watchdog as the address is lower.
> I think maybe this got flipped around during cherry-picking.
> I can flip it around when I pull this into an mstar dts for 5.15
> branch so you don't need to fix it and send a v3 assuming everything
> else is ok.
>
> Thanks,
>
> Daniel

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 1/3] dt-bindings: rtc: Add Mstar MSC313e RTC devicetree bindings documentation
  2021-08-06 21:37   ` Rob Herring
@ 2021-08-19 16:24     ` Romain Perier
  0 siblings, 0 replies; 10+ messages in thread
From: Romain Perier @ 2021-08-19 16:24 UTC (permalink / raw)
  To: Rob Herring
  Cc: Alessandro Zummo, Alexandre Belloni, Daniel Palmer, linux-rtc,
	devicetree, Linux Kernel Mailing List, linux-arm-kernel

Hi,

Le ven. 6 août 2021 à 23:37, Rob Herring <robh@kernel.org> a écrit :
>
> On Sun, Aug 01, 2021 at 06:09:19PM +0200, Romain Perier wrote:
> > This adds the documentation for the devicetree bindings of the Mstar
> > MSC313e RTC driver, found from MSC313e SoCs and newer.
> >
> > Signed-off-by: Romain Perier <romain.perier@gmail.com>
> > ---
> >  .../bindings/rtc/mstar,msc313-rtc.yaml        | 49 +++++++++++++++++++
> >  1 file changed, 49 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml b/Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml
> > new file mode 100644
> > index 000000000000..62bc12b1feb6
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml
> > @@ -0,0 +1,49 @@
> > +# SPDX-License-Identifier: GPL-2.0
>
> As checkpatch.pl will tell you, should be dual licensed.

Arf, sorry for this, I have completely missed it (it will be fixed in v3).

Romain

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 2/3] rtc: Add support for the MSTAR MSC313 RTC
  2021-08-06 19:38   ` Alexandre Belloni
@ 2021-08-19 16:55     ` Romain Perier
  0 siblings, 0 replies; 10+ messages in thread
From: Romain Perier @ 2021-08-19 16:55 UTC (permalink / raw)
  To: Alexandre Belloni
  Cc: Alessandro Zummo, Daniel Palmer, Rob Herring, linux-rtc,
	devicetree, Linux Kernel Mailing List, linux-arm-kernel

Hello,

Le ven. 6 août 2021 à 21:38, Alexandre Belloni
<alexandre.belloni@bootlin.com> a écrit :
>
> Hello,
>
> On 01/08/2021 18:09:20+0200, Romain Perier wrote:
> > +static int msc313_rtc_probe(struct platform_device *pdev)
> > +{
> > +     struct device *dev = &pdev->dev;
> > +     struct msc313_rtc *priv;
> > +     int ret;
> > +     int irq;
> > +     unsigned long rate;
> > +     u16 reg;
> > +
> > +     priv = devm_kzalloc(&pdev->dev, sizeof(struct msc313_rtc), GFP_KERNEL);
> > +     if (!priv)
> > +             return -ENOMEM;
> > +
> > +     priv->rtc_base = devm_platform_ioremap_resource(pdev, 0);
> > +     if (IS_ERR(priv->rtc_base))
> > +             return PTR_ERR(priv->rtc_base);
> > +
> > +     irq = platform_get_irq(pdev, 0);
> > +     if (irq < 0)
> > +             return -EINVAL;
> > +
> > +     priv->rtc_dev = devm_rtc_allocate_device(dev);
> > +     if (IS_ERR(priv->rtc_dev))
> > +             return PTR_ERR(priv->rtc_dev);
> > +
> > +     priv->rtc_dev->ops = &msc313_rtc_ops;
> > +     priv->rtc_dev->range_min = RTC_TIMESTAMP_BEGIN_0000;
>
> I'm pretty sure this doesn't fit in this RTC registers, you should
> probably leave range_min to 0 (i.e. not set it at all).

ack

>
> > +     priv->rtc_dev->range_max = U32_MAX - 1; /* 2106-02-07 06:28:14 */
>
> I guess this one should be U32_MAX

ack

> > +
> > +     ret = devm_request_irq(dev, irq, msc313_rtc_interrupt, IRQF_SHARED,
> > +                            dev_name(&pdev->dev), &pdev->dev);
> > +     if (ret) {
> > +             dev_err(dev, "Could not request IRQ\n");
> > +             return ret;
> > +     }
> > +
> > +     priv->clk = devm_clk_get(dev, NULL);
> > +     if (IS_ERR(priv->clk)) {
> > +             dev_err(dev, "No input reference clock\n");
> > +             return PTR_ERR(priv->clk);
> > +     }
> > +
> > +     ret = clk_prepare_enable(priv->clk);
> > +     if (ret) {
> > +             dev_err(dev, "Failed to enable the reference clock, %d\n", ret);
> > +             return ret;
> > +     }
> > +
> > +     ret = devm_add_action_or_reset(dev, (void (*) (void *))clk_disable_unprepare, priv->clk);
> > +     if (ret)
> > +             return ret;
> > +
> > +     rate = clk_get_rate(priv->clk);
> > +     writew(rate & 0xFFFF, priv->rtc_base + REG_RTC_FREQ_CW_L);
> > +     writew((rate >> 16) & 0xFFFF, priv->rtc_base + REG_RTC_FREQ_CW_H);
> > +
> > +     reg = readw(priv->rtc_base + REG_RTC_CTRL);
> > +     reg |= CNT_EN_BIT;
> > +     writew(reg, priv->rtc_base + REG_RTC_CTRL);
> > +
>
> If on POR, CNT_EN_BIT is not set, then it would be nice to use that to
> know whether the RTC is properly set. You can then check CNT_EN_BIT in
> .read_time and return -EINVAL if it is not set. Then you can set the bit
> in .set_time. It is anyway useless to let the RTC running if it is not
> set.

Yeah, this is to be sure that the RTC is alive with a valid value
(which makes sense).
Ok I will fix everything in v3, then.

Romain

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2021-08-19 16:55 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-01 16:09 [PATCH v2 0/3] Add RTC for MStar SoCs Romain Perier
2021-08-01 16:09 ` [PATCH v2 1/3] dt-bindings: rtc: Add Mstar MSC313e RTC devicetree bindings documentation Romain Perier
2021-08-06 21:37   ` Rob Herring
2021-08-19 16:24     ` Romain Perier
2021-08-01 16:09 ` [PATCH v2 2/3] rtc: Add support for the MSTAR MSC313 RTC Romain Perier
2021-08-06 19:38   ` Alexandre Belloni
2021-08-19 16:55     ` Romain Perier
2021-08-01 16:09 ` [PATCH v2 3/3] ARM: dts: mstar: Add rtc device node Romain Perier
2021-08-02 10:39   ` Daniel Palmer
2021-08-19 16:22     ` Romain Perier

This is a public inbox, see mirroring instructions
on how to clone and mirror all data and code used for this inbox