LKML Archive on lore.kernel.org help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de> To: Andrew Lunn <andrew@lunn.ch>, Vivien Didelot <vivien.didelot@gmail.com>, Florian Fainelli <f.fainelli@gmail.com>, Vladimir Oltean <olteanv@gmail.com>, "David S. Miller" <davem@davemloft.net>, Jakub Kicinski <kuba@kernel.org>, Russell King <linux@armlinux.org.uk> Cc: Oleksij Rempel <o.rempel@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mips@vger.kernel.org Subject: [PATCH net-next v3 4/6] net: dsa: qca: ar9331: add ageing time support Date: Mon, 2 Aug 2021 15:10:35 +0200 [thread overview] Message-ID: <20210802131037.32326-5-o.rempel@pengutronix.de> (raw) In-Reply-To: <20210802131037.32326-1-o.rempel@pengutronix.de> This switch provides global ageing time configuration, so let DSA use it. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/net/dsa/qca/ar9331.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c index d94c7ea163c4..d726d2f223ea 100644 --- a/drivers/net/dsa/qca/ar9331.c +++ b/drivers/net/dsa/qca/ar9331.c @@ -1074,6 +1074,25 @@ static void ar9331_sw_port_fast_age(struct dsa_switch *ds, int port) dev_err(priv->dev, "%s: error: %i\n", __func__, ret); } +static int ar9331_sw_set_ageing_time(struct dsa_switch *ds, + unsigned int ageing_time) +{ + struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv; + struct regmap *regmap = priv->regmap; + u32 time, val; + + time = DIV_ROUND_UP(ageing_time, AR9331_SW_AT_AGE_TIME_COEF); + if (!time) + time = 1; + else if (time > U16_MAX) + time = U16_MAX; + + val = FIELD_PREP(AR9331_SW_AT_AGE_TIME, time) | AR9331_SW_AT_AGE_EN; + return regmap_update_bits(regmap, AR9331_SW_REG_ADDR_TABLE_CTRL, + AR9331_SW_AT_AGE_EN | AR9331_SW_AT_AGE_TIME, + val); +} + static const struct dsa_switch_ops ar9331_sw_ops = { .get_tag_protocol = ar9331_sw_get_tag_protocol, .setup = ar9331_sw_setup, @@ -1089,6 +1108,7 @@ static const struct dsa_switch_ops ar9331_sw_ops = { .port_fdb_dump = ar9331_sw_port_fdb_dump, .port_mdb_add = ar9331_sw_port_mdb_add, .port_mdb_del = ar9331_sw_port_mdb_del, + .set_ageing_time = ar9331_sw_set_ageing_time, }; static irqreturn_t ar9331_sw_irq(int irq, void *data) @@ -1442,6 +1462,8 @@ static int ar9331_sw_probe(struct mdio_device *mdiodev) priv->ops = ar9331_sw_ops; ds->ops = &priv->ops; dev_set_drvdata(&mdiodev->dev, priv); + ds->ageing_time_min = AR9331_SW_AT_AGE_TIME_COEF; + ds->ageing_time_max = AR9331_SW_AT_AGE_TIME_COEF * U16_MAX; for (i = 0; i < ARRAY_SIZE(priv->port); i++) { struct ar9331_sw_port *port = &priv->port[i]; -- 2.30.2
next prev parent reply other threads:[~2021-08-02 13:11 UTC|newest] Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-08-02 13:10 [PATCH net-next v3 0/6] ar9331: mainline some parts of switch functionality Oleksij Rempel 2021-08-02 13:10 ` [PATCH net-next v3 1/6] net: dsa: qca: ar9331: reorder MDIO write sequence Oleksij Rempel 2021-08-02 14:00 ` Vladimir Oltean 2021-08-02 13:10 ` [PATCH net-next v3 2/6] net: dsa: qca: ar9331: make proper initial port defaults Oleksij Rempel 2021-08-02 14:03 ` Vladimir Oltean 2021-08-02 19:45 ` Andrew Lunn 2021-08-03 6:36 ` Oleksij Rempel 2021-08-02 19:42 ` Andrew Lunn 2021-08-02 13:10 ` [PATCH net-next v3 3/6] net: dsa: qca: ar9331: add forwarding database support Oleksij Rempel 2021-08-02 15:37 ` Vladimir Oltean 2021-08-02 13:10 ` Oleksij Rempel [this message] 2021-08-02 13:10 ` [PATCH net-next v3 5/6] net: dsa: qca: ar9331: add bridge support Oleksij Rempel 2021-08-02 14:55 ` Vladimir Oltean 2021-08-07 23:08 ` Vladimir Oltean 2021-08-09 5:04 ` Oleksij Rempel 2021-08-02 13:10 ` [PATCH net-next v3 6/6] net: dsa: qca: ar9331: add vlan support Oleksij Rempel 2021-08-02 14:50 ` Vladimir Oltean
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210802131037.32326-5-o.rempel@pengutronix.de \ --to=o.rempel@pengutronix.de \ --cc=andrew@lunn.ch \ --cc=davem@davemloft.net \ --cc=f.fainelli@gmail.com \ --cc=kernel@pengutronix.de \ --cc=kuba@kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mips@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=netdev@vger.kernel.org \ --cc=olteanv@gmail.com \ --cc=vivien.didelot@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).