LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Alistair Francis <alistair@alistair23.me>
To: lee.jones@linaro.org, robh+dt@kernel.org, lgirdwood@gmail.com,
	broonie@kernel.org, linux-imx@nxp.com, kernel@pengutronix.de
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	alistair23@gmail.com,
	Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.no>,
	Alistair Francis <alistair@alistair23.me>
Subject: [PATCH v8 03/11] thermal: sy7636a: Add thermal driver for sy7636a
Date: Tue,  3 Aug 2021 18:44:50 +1000	[thread overview]
Message-ID: <20210803084456.198-3-alistair@alistair23.me> (raw)
In-Reply-To: <20210803084456.198-1-alistair@alistair23.me>

From: Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.no>

Add thermal driver to enable kernel based polling
and shutdown of device for temperatures out of spec

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 drivers/thermal/Kconfig           |  7 +++
 drivers/thermal/Makefile          |  1 +
 drivers/thermal/sy7636a_thermal.c | 91 +++++++++++++++++++++++++++++++
 3 files changed, 99 insertions(+)
 create mode 100644 drivers/thermal/sy7636a_thermal.c

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index d7f44deab5b1..b383064a0ad7 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -450,6 +450,13 @@ depends on (ARCH_STI || ARCH_STM32) && OF
 source "drivers/thermal/st/Kconfig"
 endmenu
 
+config SY7636A_THERMAL
+	tristate "SY7636A thermal management"
+	depends on MFD_SY7636A
+	help
+	  Enable the sy7636a thermal driver, which supports the
+	  temperature sensor embedded in Silabs SY7636A IC.
+
 source "drivers/thermal/tegra/Kconfig"
 
 config GENERIC_ADC_THERMAL
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 82fc3e616e54..2e1aca8a0a09 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_DA9062_THERMAL)	+= da9062-thermal.o
 obj-y				+= intel/
 obj-$(CONFIG_TI_SOC_THERMAL)	+= ti-soc-thermal/
 obj-y				+= st/
+obj-$(CONFIG_SY7636A_THERMAL)	+= sy7636a_thermal.o
 obj-$(CONFIG_QCOM_TSENS)	+= qcom/
 obj-y				+= tegra/
 obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
diff --git a/drivers/thermal/sy7636a_thermal.c b/drivers/thermal/sy7636a_thermal.c
new file mode 100644
index 000000000000..1112108ad972
--- /dev/null
+++ b/drivers/thermal/sy7636a_thermal.c
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Functions to access SY3686A power management chip temperature
+//
+// Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
+//
+// Authors: Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com>
+//          Alistair Francis <alistair@alistair23.me>
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#include <linux/mfd/sy7636a.h>
+
+static int sy7636a_get_temp(void *arg, int *res)
+{
+	unsigned int reg_val, mode_ctr;
+	int ret;
+	struct sy7636a *data = arg;
+	bool isVoltageActive;
+
+	ret = regmap_read(data->regmap,
+			SY7636A_REG_OPERATION_MODE_CRL, &mode_ctr);
+	if (ret)
+		return ret;
+
+	isVoltageActive = mode_ctr & SY7636A_OPERATION_MODE_CRL_ONOFF;
+
+	if (!isVoltageActive) {
+		ret = regmap_write(data->regmap,
+				SY7636A_REG_OPERATION_MODE_CRL,
+				mode_ctr | SY7636A_OPERATION_MODE_CRL_ONOFF);
+		if (ret)
+			return ret;
+	}
+
+	ret = regmap_read(data->regmap,
+			SY7636A_REG_TERMISTOR_READOUT, &reg_val);
+	if (ret)
+		return ret;
+
+	if (!isVoltageActive) {
+		ret = regmap_write(data->regmap,
+				SY7636A_REG_OPERATION_MODE_CRL,
+				mode_ctr);
+		if (ret)
+			return ret;
+	}
+
+	*res = reg_val * 1000;
+
+	return ret;
+}
+
+static const struct thermal_zone_of_device_ops ops = {
+	.get_temp	= sy7636a_get_temp,
+};
+
+static int sy7636a_thermal_probe(struct platform_device *pdev)
+{
+	struct sy7636a *sy7636a = dev_get_drvdata(pdev->dev.parent);
+	struct thermal_zone_device *thermal_zone_dev;
+
+	thermal_zone_dev = devm_thermal_zone_of_sensor_register(
+			pdev->dev.parent,
+			0,
+			sy7636a,
+			&ops);
+
+	return PTR_ERR_OR_ZERO(thermal_zone_dev);
+}
+
+static const struct platform_device_id sy7636a_thermal_id_table[] = {
+	{ "sy7636a-thermal", },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, sy7636a_thermal_id_table);
+
+static struct platform_driver sy7636a_thermal_driver = {
+	.driver = {
+		.name = "sy7636a-thermal",
+	},
+	.probe = sy7636a_thermal_probe,
+	.id_table = sy7636a_thermal_id_table,
+};
+module_platform_driver(sy7636a_thermal_driver);
+
+MODULE_AUTHOR("Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com>");
+MODULE_DESCRIPTION("SY7636A thermal driver");
+MODULE_LICENSE("GPL v2");
-- 
2.31.1


  parent reply	other threads:[~2021-08-03  8:46 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-03  8:44 [PATCH v8 01/11] dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml Alistair Francis
2021-08-03  8:44 ` [PATCH v8 02/11] mfd: sy7636a: Initial commit Alistair Francis
2021-08-03 13:16   ` Lee Jones
2021-08-04  8:22     ` Alistair Francis
2021-08-04  9:06       ` Lee Jones
2021-08-04  9:37         ` Alistair Francis
2021-08-04 10:28           ` Lee Jones
2021-08-04 10:35             ` Alistair Francis
2021-08-03  8:44 ` Alistair Francis [this message]
2021-08-03  8:44 ` [PATCH v8 04/11] hwmon: sy7636a: Add temperature driver for sy7636a Alistair Francis
2021-08-03  8:44 ` [PATCH v8 05/11] regulator: sy7636a: Remove the poll_enable_time Alistair Francis
2021-08-03  8:44 ` [PATCH v8 06/11] regulator: sy7636a: Use the parent driver data Alistair Francis
2021-08-03  8:44 ` [PATCH v8 07/11] regulator: sy7636a: Store the epd-pwr-good GPIO locally Alistair Francis
2021-08-03  8:44 ` [PATCH v8 08/11] ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a Alistair Francis
2021-08-03  8:44 ` [PATCH v8 09/11] ARM: dts: imx7d: remarkable2: " Alistair Francis
2021-08-04 12:43   ` Lee Jones
2021-08-05  8:05     ` Alistair Francis
2021-08-05  8:26       ` Lee Jones
2021-08-05  8:37         ` Alistair Francis
2021-08-03 22:35 ` (subset) [PATCH v8 01/11] dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210803084456.198-3-alistair@alistair23.me \
    --to=alistair@alistair23.me \
    --cc=alistair23@gmail.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=lars.ivar.miljeteig@remarkable.no \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH v8 03/11] thermal: sy7636a: Add thermal driver for sy7636a' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).