LKML Archive on
help / color / mirror / Atom feed
* [PATCH v2] mmc: mediatek: add wait dma stop done flow
@ 2021-08-09  7:23 Derong Liu
  2021-08-16 10:27 ` Ulf Hansson
  0 siblings, 1 reply; 2+ messages in thread
From: Derong Liu @ 2021-08-09  7:23 UTC (permalink / raw)
  To: Chaotian Jing, Ulf Hansson, Matthias Brugger
  Cc: linux-mmc, linux-arm-kernel, linux-mediatek, linux-kernel,
	wsp_upstream, Peng Zhou, Derong Liu

We found this issue on a 5G platform, during CMDQ error handling, if DMA status is active when it call msdc_reset_hw, it means mmc host hw reset and DMA transfer will be parallel, mmc host may access sram region unexpectedly.

According to the programming guide of mtk mmc host,it needs to wait for dma stop done after set dma stop.
This change should be applied to all SoCs.

Signed-off-by: Derong Liu <>
 drivers/mmc/host/mtk-sd.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 4dfc246c5f95..1dfd2842471b 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -2339,6 +2339,8 @@ static void msdc_cqe_disable(struct mmc_host *mmc, bool recovery)
 	if (recovery) {
 		sdr_set_field(host->base + MSDC_DMA_CTRL,
 			      MSDC_DMA_CTRL_STOP, 1);
+		while (readl(host->base + MSDC_DMA_CFG) & MSDC_DMA_CFG_STS)
+			cpu_relax();

^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2021-08-16 10:27 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-09  7:23 [PATCH v2] mmc: mediatek: add wait dma stop done flow Derong Liu
2021-08-16 10:27 ` Ulf Hansson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).