LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Richard Fitzgerald <rf@opensource.cirrus.com>
To: <broonie@kernel.org>
Cc: <alsa-devel@alsa-project.org>, <patches@opensource.cirrus.com>,
<linux-kernel@vger.kernel.org>,
Richard Fitzgerald <rf@opensource.cirrus.com>
Subject: [PATCH 12/12] ASoC: cs42l42: Add control for audio slow-start switch
Date: Tue, 10 Aug 2021 16:37:59 +0100 [thread overview]
Message-ID: <20210810153759.24333-13-rf@opensource.cirrus.com> (raw)
In-Reply-To: <20210810153759.24333-1-rf@opensource.cirrus.com>
This adds an ALSA control so that the slow-start audio ramp feature
can be disabled. This is useful for high-definition audio applications.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
---
sound/soc/codecs/cs42l42.c | 33 ++++++++++++++++++++++++++++++++-
sound/soc/codecs/cs42l42.h | 3 +++
2 files changed, 35 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index b2632fdef9a0..ae9190720380 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -43,6 +43,7 @@ static const struct reg_default cs42l42_reg_defaults[] = {
{ CS42L42_MCLK_STATUS, 0x02 },
{ CS42L42_MCLK_CTL, 0x02 },
{ CS42L42_SFTRAMP_RATE, 0xA4 },
+ { CS42L42_SLOW_START_ENABLE, 0x70 },
{ CS42L42_I2C_DEBOUNCE, 0x88 },
{ CS42L42_I2C_STRETCH, 0x03 },
{ CS42L42_I2C_TIMEOUT, 0xB7 },
@@ -198,6 +199,7 @@ static bool cs42l42_readable_register(struct device *dev, unsigned int reg)
case CS42L42_MCLK_STATUS:
case CS42L42_MCLK_CTL:
case CS42L42_SFTRAMP_RATE:
+ case CS42L42_SLOW_START_ENABLE:
case CS42L42_I2C_DEBOUNCE:
case CS42L42_I2C_STRETCH:
case CS42L42_I2C_TIMEOUT:
@@ -408,6 +410,30 @@ static const struct regmap_config cs42l42_regmap = {
static DECLARE_TLV_DB_SCALE(adc_tlv, -9700, 100, true);
static DECLARE_TLV_DB_SCALE(mixer_tlv, -6300, 100, true);
+static int cs42l42_slow_start_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+ u8 val;
+
+ /* all bits of SLOW_START_EN must be 1 to enable */
+ switch (ucontrol->value.integer.value[0]) {
+ case 0:
+ val = 0;
+ break;
+ case 1:
+ val = CS42L42_SLOW_START_EN_MASK;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_component_update_bits(component, CS42L42_SLOW_START_ENABLE,
+ CS42L42_SLOW_START_EN_MASK, val);
+
+ return 0;
+}
+
static const char * const cs42l42_hpf_freq_text[] = {
"1.86Hz", "120Hz", "235Hz", "466Hz"
};
@@ -461,7 +487,12 @@ static const struct snd_kcontrol_new cs42l42_snd_controls[] = {
SOC_ENUM("HP Volume Scale", cs42l42_full_scale_vol_enum),
SOC_DOUBLE_R_TLV("Mixer Volume", CS42L42_MIXER_CHA_VOL,
CS42L42_MIXER_CHB_VOL, CS42L42_MIXER_CH_VOL_SHIFT,
- 0x3f, 1, mixer_tlv)
+ 0x3f, 1, mixer_tlv),
+
+ /* Global */
+ SOC_SINGLE_EXT("Slow Start Switch", CS42L42_SLOW_START_ENABLE,
+ CS42L42_SLOW_START_EN_SHIFT, true, false,
+ snd_soc_get_volsw, cs42l42_slow_start_put),
};
static int cs42l42_hp_adc_ev(struct snd_soc_dapm_widget *w,
diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h
index b10796d755ae..85ba1d846072 100644
--- a/sound/soc/codecs/cs42l42.h
+++ b/sound/soc/codecs/cs42l42.h
@@ -62,6 +62,9 @@
#define CS42L42_INTERNAL_FS_MASK (1 << CS42L42_INTERNAL_FS_SHIFT)
#define CS42L42_SFTRAMP_RATE (CS42L42_PAGE_10 + 0x0A)
+#define CS42L42_SLOW_START_ENABLE (CS42L42_PAGE_10 + 0x0B)
+#define CS42L42_SLOW_START_EN_MASK GENMASK(6, 4)
+#define CS42L42_SLOW_START_EN_SHIFT 4
#define CS42L42_I2C_DEBOUNCE (CS42L42_PAGE_10 + 0x0E)
#define CS42L42_I2C_STRETCH (CS42L42_PAGE_10 + 0x0F)
#define CS42L42_I2C_TIMEOUT (CS42L42_PAGE_10 + 0x10)
--
2.11.0
prev parent reply other threads:[~2021-08-10 15:40 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-10 15:37 [PATCH 00/12] ASoC: cs42l42: Series of bugfixes and improvements Richard Fitzgerald
2021-08-10 15:37 ` [PATCH 01/12] ASoC: cs42l42: Use PLL for SCLK > 12.188MHz Richard Fitzgerald
2021-08-10 15:37 ` [PATCH 02/12] ASoC: cs42l42: Don't claim to support 192k Richard Fitzgerald
2021-08-10 15:37 ` [PATCH 03/12] ASoC: cs42l42: Always configure both ASP TX channels Richard Fitzgerald
2021-08-10 15:37 ` [PATCH 04/12] ASoC: cs42l42: Don't reconfigure the PLL while it is running Richard Fitzgerald
2021-08-10 15:49 ` Mark Brown
2021-08-10 16:27 ` Richard Fitzgerald
2021-08-11 11:56 ` Mark Brown
2021-08-11 12:21 ` Richard Fitzgerald
2021-08-11 14:41 ` Mark Brown
2021-08-11 10:56 ` Richard Fitzgerald
2021-08-10 15:37 ` [PATCH 05/12] ASoC: cs42l42: Set correct SRC MCLK Richard Fitzgerald
2021-08-10 15:37 ` [PATCH 06/12] ASoC: cs42l42: Mark OSC_SWITCH_STATUS register volatile Richard Fitzgerald
2021-08-10 15:37 ` [PATCH 07/12] ASoC: cs42l42: Allow time for HP/ADC to power-up after enable Richard Fitzgerald
2021-08-10 15:37 ` [PATCH 08/12] ASoC: cs42l42: Prevent NULL pointer deref in interrupt handler Richard Fitzgerald
2021-08-10 15:37 ` [PATCH 09/12] ASoC: cs42l42: Remove runtime_suspend/runtime_resume callbacks Richard Fitzgerald
2021-08-10 15:37 ` [PATCH 10/12] ASoC: cs42l42: Remove redundant pll_divout member Richard Fitzgerald
2021-08-10 15:37 ` [PATCH 11/12] ASoC: cs42l42: Add HP Volume Scale control Richard Fitzgerald
2021-08-10 15:37 ` Richard Fitzgerald [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210810153759.24333-13-rf@opensource.cirrus.com \
--to=rf@opensource.cirrus.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--subject='Re: [PATCH 12/12] ASoC: cs42l42: Add control for audio slow-start switch' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).