LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Michael Tretter <m.tretter@pengutronix.de>
To: Guillaume Tucker <guillaume.tucker@collabora.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
	kernel@collabora.com, kernel@pengutronix.de
Subject: Re: [PATCH v2] media: vivid: drop CONFIG_FB dependency
Date: Wed, 11 Aug 2021 12:00:31 +0200	[thread overview]
Message-ID: <20210811100031.GB27204@pengutronix.de> (raw)
In-Reply-To: <8615e9e583173652894889afd492022683389621.1628177586.git.guillaume.tucker@collabora.com>

On Thu, 05 Aug 2021 16:36:31 +0100, Guillaume Tucker wrote:
> Drop the vivid dependency on CONFIG_FB by compiling out parts of the
> code that make use of the framebuffer API when not enabled.  This is
> particularly useful as CONFIG_FB is not selected any more by
> DRM_FBDEV_EMULATION.

I like this a lot.

> 
> Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
> Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
> ---
> 
> Notes:
>     Changes in v2:
>     * fix Makefile conditional for when CONFIG_FB=m
>     * compile-out bit 16 (framebuffer) when no CONFIG_FB
> 
>  drivers/media/test-drivers/vivid/Kconfig       | 5 +----
>  drivers/media/test-drivers/vivid/Makefile      | 5 ++++-
>  drivers/media/test-drivers/vivid/vivid-core.c  | 9 +++++++++
>  drivers/media/test-drivers/vivid/vivid-ctrls.c | 4 ++++
>  4 files changed, 18 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/media/test-drivers/vivid/Kconfig b/drivers/media/test-drivers/vivid/Kconfig
> index c3abde2986b2..06ad350f1903 100644
> --- a/drivers/media/test-drivers/vivid/Kconfig
> +++ b/drivers/media/test-drivers/vivid/Kconfig
> @@ -1,13 +1,10 @@
>  # SPDX-License-Identifier: GPL-2.0-only
>  config VIDEO_VIVID
>  	tristate "Virtual Video Test Driver"
> -	depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 && FB
> +	depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
>  	depends on HAS_DMA
>  	select FONT_SUPPORT
>  	select FONT_8x16
> -	select FB_CFB_FILLRECT
> -	select FB_CFB_COPYAREA
> -	select FB_CFB_IMAGEBLIT
>  	select VIDEOBUF2_VMALLOC
>  	select VIDEOBUF2_DMA_CONTIG
>  	select VIDEO_V4L2_TPG
> diff --git a/drivers/media/test-drivers/vivid/Makefile b/drivers/media/test-drivers/vivid/Makefile
> index b12ad0152a3e..2ad634da7f88 100644
> --- a/drivers/media/test-drivers/vivid/Makefile
> +++ b/drivers/media/test-drivers/vivid/Makefile
> @@ -3,10 +3,13 @@ vivid-objs := vivid-core.o vivid-ctrls.o vivid-vid-common.o vivid-vbi-gen.o \
>  		vivid-vid-cap.o vivid-vid-out.o vivid-kthread-cap.o vivid-kthread-out.o \
>  		vivid-radio-rx.o vivid-radio-tx.o vivid-radio-common.o \
>  		vivid-rds-gen.o vivid-sdr-cap.o vivid-vbi-cap.o vivid-vbi-out.o \
> -		vivid-osd.o vivid-meta-cap.o vivid-meta-out.o \
> +		vivid-meta-cap.o vivid-meta-out.o \
>  		vivid-kthread-touch.o vivid-touch-cap.o
>  ifeq ($(CONFIG_VIDEO_VIVID_CEC),y)
>    vivid-objs += vivid-cec.o
>  endif
> +ifneq ($(CONFIG_FB),)
> +  vivid-objs += vivid-osd.o

vivid-osd depends on FB_CFB_FILLRECT, FB_CFB_COPYAREA, and FB_CFB_IMAGEBLIT,
which are not selected anymore, and linking fails if CONFIG_FB is enabled, but
the others are disabled.

Michael

> +endif
>  
>  obj-$(CONFIG_VIDEO_VIVID) += vivid.o
> diff --git a/drivers/media/test-drivers/vivid/vivid-core.c b/drivers/media/test-drivers/vivid/vivid-core.c
> index d2bd2653cf54..7675962b9e93 100644
> --- a/drivers/media/test-drivers/vivid/vivid-core.c
> +++ b/drivers/media/test-drivers/vivid/vivid-core.c
> @@ -126,7 +126,9 @@ MODULE_PARM_DESC(node_types, " node types, default is 0xe1d3d. Bitmask with the
>  			     "\t\t    bit 8: Video Output node\n"
>  			     "\t\t    bit 10-11: VBI Output node: 0 = none, 1 = raw vbi, 2 = sliced vbi, 3 = both\n"
>  			     "\t\t    bit 12: Radio Transmitter node\n"
> +#if IS_ENABLED(CONFIG_FB)
>  			     "\t\t    bit 16: Framebuffer for testing overlays\n"
> +#endif
>  			     "\t\t    bit 17: Metadata Capture node\n"
>  			     "\t\t    bit 18: Metadata Output node\n"
>  			     "\t\t    bit 19: Touch Capture node\n");
> @@ -1021,9 +1023,11 @@ static int vivid_detect_feature_set(struct vivid_dev *dev, int inst,
>  	/* do we have a modulator? */
>  	*has_modulator = dev->has_radio_tx;
>  
> +#if IS_ENABLED(CONFIG_FB)
>  	if (dev->has_vid_cap)
>  		/* do we have a framebuffer for overlay testing? */
>  		dev->has_fb = node_type & 0x10000;
> +#endif
>  
>  	/* can we do crop/compose/scaling while capturing? */
>  	if (no_error_inj && *ccs_cap == -1)
> @@ -1355,6 +1359,7 @@ static int vivid_create_queues(struct vivid_dev *dev)
>  			return ret;
>  	}
>  
> +#if IS_ENABLED(CONFIG_FB)
>  	if (dev->has_fb) {
>  		/* Create framebuffer for testing capture/output overlay */
>  		ret = vivid_fb_init(dev);
> @@ -1363,6 +1368,8 @@ static int vivid_create_queues(struct vivid_dev *dev)
>  		v4l2_info(&dev->v4l2_dev, "Framebuffer device registered as fb%d\n",
>  			  dev->fb_info.node);
>  	}
> +#endif
> +
>  	return 0;
>  }
>  
> @@ -2069,12 +2076,14 @@ static int vivid_remove(struct platform_device *pdev)
>  				video_device_node_name(&dev->radio_tx_dev));
>  			video_unregister_device(&dev->radio_tx_dev);
>  		}
> +#if IS_ENABLED(CONFIG_FB)
>  		if (dev->has_fb) {
>  			v4l2_info(&dev->v4l2_dev, "unregistering fb%d\n",
>  				dev->fb_info.node);
>  			unregister_framebuffer(&dev->fb_info);
>  			vivid_fb_release_buffers(dev);
>  		}
> +#endif
>  		if (dev->has_meta_cap) {
>  			v4l2_info(&dev->v4l2_dev, "unregistering %s\n",
>  				  video_device_node_name(&dev->meta_cap_dev));
> diff --git a/drivers/media/test-drivers/vivid/vivid-ctrls.c b/drivers/media/test-drivers/vivid/vivid-ctrls.c
> index 8dc50fe22972..081470a1d88a 100644
> --- a/drivers/media/test-drivers/vivid/vivid-ctrls.c
> +++ b/drivers/media/test-drivers/vivid/vivid-ctrls.c
> @@ -305,6 +305,7 @@ static const struct v4l2_ctrl_config vivid_ctrl_ro_int32 = {
>  
>  /* Framebuffer Controls */
>  
> +#if IS_ENABLED(CONFIG_FB)
>  static int vivid_fb_s_ctrl(struct v4l2_ctrl *ctrl)
>  {
>  	struct vivid_dev *dev = container_of(ctrl->handler,
> @@ -328,6 +329,7 @@ static const struct v4l2_ctrl_config vivid_ctrl_clear_fb = {
>  	.name = "Clear Framebuffer",
>  	.type = V4L2_CTRL_TYPE_BUTTON,
>  };
> +#endif /* IS_ENABLED(CONFIG_FB) */
>  
>  
>  /* Video User Controls */
> @@ -1761,8 +1763,10 @@ int vivid_create_controls(struct vivid_dev *dev, bool show_ccs_cap,
>  	    (dev->has_vbi_cap && dev->has_vbi_out))
>  		v4l2_ctrl_new_custom(hdl_loop_cap, &vivid_ctrl_loop_video, NULL);
>  
> +#if IS_ENABLED(CONFIG_FB)
>  	if (dev->has_fb)
>  		v4l2_ctrl_new_custom(hdl_fb, &vivid_ctrl_clear_fb, NULL);
> +#endif
>  
>  	if (dev->has_radio_rx) {
>  		v4l2_ctrl_new_custom(hdl_radio_rx, &vivid_ctrl_radio_hw_seek_mode, NULL);
> -- 
> 2.20.1
> 
> 

  reply	other threads:[~2021-08-11 10:00 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-05 15:36 Guillaume Tucker
2021-08-11 10:00 ` Michael Tretter [this message]
2021-09-03 15:47   ` Guillaume Tucker

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210811100031.GB27204@pengutronix.de \
    --to=m.tretter@pengutronix.de \
    --cc=guillaume.tucker@collabora.com \
    --cc=hverkuil@xs4all.nl \
    --cc=kernel@collabora.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --subject='Re: [PATCH v2] media: vivid: drop CONFIG_FB dependency' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).