LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Michael Tretter <m.tretter@pengutronix.de>
To: Michal Simek <michal.simek@xilinx.com>
Cc: linux-kernel@vger.kernel.org, monstr@monstr.eu, git@xilinx.com,
Viresh Kumar <viresh.kumar@linaro.org>,
Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Quanyang Wang <quanyang.wang@windriver.com>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
kernel@pengutronix.de
Subject: Re: [PATCH v3 1/2] arm64: zynqmp: Enable xlnx, zynqmp-dwc3 driver for xilinx boards
Date: Wed, 11 Aug 2021 12:12:47 +0200 [thread overview]
Message-ID: <20210811101247.GC27204@pengutronix.de> (raw)
In-Reply-To: <640a3bc0dc3e32560d3e84c2f78b5ae561396eb0.1628244703.git.michal.simek@xilinx.com>
On Fri, 06 Aug 2021 12:12:07 +0200, Michal Simek wrote:
> The commit 84770f028fab ("usb: dwc3: Add driver for Xilinx platforms")
> finally add proper support for Xilinx dwc3 driver. This patch is adding DT
> description for it.
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
> ---
>
> Changes in v3:
> - usb node name fix, remove undocumented properties reported by Michael Tretter
> - Also remove status property from dwc3_0/1 nodes reported by Michael
> Tretter
> - Move USB3 PHY properties from DWC3 node to USB node - reported by Manish
> Narani
>
> Changes in v2:
> - New patch in the series
>
> .../dts/xilinx/zynqmp-zc1751-xm015-dc1.dts | 8 ++-
> .../dts/xilinx/zynqmp-zc1751-xm016-dc2.dts | 7 +++
> .../dts/xilinx/zynqmp-zc1751-xm017-dc3.dts | 14 +++++
> .../boot/dts/xilinx/zynqmp-zcu100-revC.dts | 14 ++++-
> .../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 8 ++-
> .../boot/dts/xilinx/zynqmp-zcu104-revA.dts | 8 ++-
> .../boot/dts/xilinx/zynqmp-zcu104-revC.dts | 8 ++-
> .../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 8 ++-
> .../boot/dts/xilinx/zynqmp-zcu111-revA.dts | 8 ++-
> arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 60 +++++++++++++++----
> 10 files changed, 122 insertions(+), 21 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
> index d93fe2efa39d..b05be2552826 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
> @@ -27,6 +27,7 @@ aliases {
> rtc0 = &rtc;
> serial0 = &uart0;
> spi0 = &qspi;
> + usb0 = &usb0;
> };
>
> chosen {
> @@ -404,9 +405,14 @@ &usb0 {
> status = "okay";
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usb0_default>;
> - dr_mode = "host";
> phy-names = "usb3-phy";
> phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
> +};
> +
> +&dwc3_0 {
> + status = "okay";
> + dr_mode = "host";
> + snps,usb3_lpm_capable;
> maximum-speed = "super-speed";
> };
>
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
> index cd61550c52e5..938b76bd0527 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
> @@ -26,6 +26,7 @@ aliases {
> serial1 = &uart1;
> spi0 = &spi0;
> spi1 = &spi1;
> + usb0 = &usb1;
> };
>
> chosen {
> @@ -479,7 +480,13 @@ &usb1 {
> status = "okay";
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usb1_default>;
> +};
> +
> +&dwc3_1 {
> + status = "okay";
> dr_mode = "host";
> + snps,usb3_lpm_capable;
> + maximum-speed = "super-speed";
> };
>
> &uart0 {
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
> index ba7f1f21c579..4394ec3b6a23 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
> @@ -24,6 +24,8 @@ aliases {
> rtc0 = &rtc;
> serial0 = &uart0;
> serial1 = &uart1;
> + usb0 = &usb0;
> + usb1 = &usb1;
> };
>
> chosen {
> @@ -147,11 +149,23 @@ &uart1 {
>
> &usb0 {
> status = "okay";
> +};
> +
> +&dwc3_0 {
> + status = "okay";
> dr_mode = "host";
> + snps,usb3_lpm_capable;
> + maximum-speed = "super-speed";
> };
>
> /* ULPI SMSC USB3320 */
> &usb1 {
> status = "okay";
> +};
> +
> +&dwc3_1 {
> + status = "okay";
> dr_mode = "host";
> + snps,usb3_lpm_capable;
> + maximum-speed = "super-speed";
> };
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
> index 80415e202814..f6aad4159ccd 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
> @@ -30,6 +30,8 @@ aliases {
> serial2 = &dcc;
> spi0 = &spi0;
> spi1 = &spi1;
> + usb0 = &usb0;
> + usb1 = &usb1;
> mmc0 = &sdhci0;
> mmc1 = &sdhci1;
> };
> @@ -537,9 +539,13 @@ &usb0 {
> status = "okay";
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usb0_default>;
> - dr_mode = "peripheral";
> phy-names = "usb3-phy";
> phys = <&psgtr 2 PHY_TYPE_USB3 0 0>;
> +};
> +
> +&dwc3_0 {
> + status = "okay";
> + dr_mode = "peripheral";
> maximum-speed = "super-speed";
> };
>
> @@ -548,9 +554,13 @@ &usb1 {
> status = "okay";
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usb1_default>;
> - dr_mode = "host";
> phy-names = "usb3-phy";
> phys = <&psgtr 3 PHY_TYPE_USB3 1 0>;
> +};
> +
> +&dwc3_1 {
> + status = "okay";
> + dr_mode = "host";
> maximum-speed = "super-speed";
> };
>
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
> index 3d8d14ef1ede..7b9a88b125d1 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
> @@ -31,6 +31,7 @@ aliases {
> serial1 = &uart1;
> serial2 = &dcc;
> spi0 = &qspi;
> + usb0 = &usb0;
> };
>
> chosen {
> @@ -997,9 +998,14 @@ &usb0 {
> status = "okay";
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usb0_default>;
> - dr_mode = "host";
> phy-names = "usb3-phy";
> phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
> +};
> +
> +&dwc3_0 {
> + status = "okay";
> + dr_mode = "host";
> + snps,usb3_lpm_capable;
> maximum-speed = "super-speed";
> };
>
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
> index 86fff3632c7d..bd8f20f3223d 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
> @@ -29,6 +29,7 @@ aliases {
> serial1 = &uart1;
> serial2 = &dcc;
> spi0 = &qspi;
> + usb0 = &usb0;
> };
>
> chosen {
> @@ -481,9 +482,14 @@ &usb0 {
> status = "okay";
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usb0_default>;
> - dr_mode = "host";
> phy-names = "usb3-phy";
> phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
> +};
> +
> +&dwc3_0 {
> + status = "okay";
> + dr_mode = "host";
> + snps,usb3_lpm_capable;
> maximum-speed = "super-speed";
> };
>
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
> index 2a872d439804..96feaad30166 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
> @@ -29,6 +29,7 @@ aliases {
> serial1 = &uart1;
> serial2 = &dcc;
> spi0 = &qspi;
> + usb0 = &usb0;
> };
>
> chosen {
> @@ -493,9 +494,14 @@ &usb0 {
> status = "okay";
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usb0_default>;
> - dr_mode = "host";
> phy-names = "usb3-phy";
> phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
> +};
> +
> +&dwc3_0 {
> + status = "okay";
> + dr_mode = "host";
> + snps,usb3_lpm_capable;
> maximum-speed = "super-speed";
> };
>
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
> index 057c04352591..20b7c75bb1d3 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
> @@ -31,6 +31,7 @@ aliases {
> serial1 = &uart1;
> serial2 = &dcc;
> spi0 = &qspi;
> + usb0 = &usb0;
> };
>
> chosen {
> @@ -990,9 +991,14 @@ &usb0 {
> status = "okay";
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usb0_default>;
> - dr_mode = "host";
> phy-names = "usb3-phy";
> phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
> +};
> +
> +&dwc3_0 {
> + status = "okay";
> + dr_mode = "host";
> + snps,usb3_lpm_capable;
> maximum-speed = "super-speed";
> };
>
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
> index e1fff62a4cd5..e36df6adbeee 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
> @@ -30,6 +30,7 @@ aliases {
> serial0 = &uart0;
> serial1 = &dcc;
> spi0 = &qspi;
> + usb0 = &usb0;
> };
>
> chosen {
> @@ -827,9 +828,14 @@ &usb0 {
> status = "okay";
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usb0_default>;
> - dr_mode = "host";
> phy-names = "usb3-phy";
> phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
> +};
> +
> +&dwc3_0 {
> + status = "okay";
> + dr_mode = "host";
> + snps,usb3_lpm_capable;
> maximum-speed = "super-speed";
> };
>
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> index b5fde9dddca5..74e66443e4ce 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> @@ -2,7 +2,7 @@
> /*
> * dts file for Xilinx ZynqMP
> *
> - * (C) Copyright 2014 - 2019, Xilinx, Inc.
> + * (C) Copyright 2014 - 2021, Xilinx, Inc.
> *
> * Michal Simek <michal.simek@xilinx.com>
> *
> @@ -805,24 +805,58 @@ uart1: serial@ff010000 {
> power-domains = <&zynqmp_firmware PD_UART_1>;
> };
>
> - usb0: usb@fe200000 {
> - compatible = "snps,dwc3";
> + usb0: usb@ff9d0000 {
> + #address-cells = <2>;
> + #size-cells = <2>;
> status = "disabled";
> - interrupt-parent = <&gic>;
> - interrupts = <0 65 4>;
> - reg = <0x0 0xfe200000 0x0 0x40000>;
> - clock-names = "clk_xin", "clk_ahb";
> + compatible = "xlnx,zynqmp-dwc3";
> + reg = <0x0 0xff9d0000 0x0 0x100>;
> + clock-names = "bus_clk", "ref_clk";
> power-domains = <&zynqmp_firmware PD_USB_0>;
> + resets = <&zynqmp_reset ZYNQMP_RESET_USB0_CORERESET>,
> + <&zynqmp_reset ZYNQMP_RESET_USB0_HIBERRESET>,
> + <&zynqmp_reset ZYNQMP_RESET_USB0_APB>;
> + reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
> + ranges;
> +
> + dwc3_0: usb@fe200000 {
> + compatible = "snps,dwc3";
> + reg = <0x0 0xfe200000 0x0 0x40000>;
> + interrupt-parent = <&gic>;
> + interrupt-names = "dwc_usb3", "otg";
> + interrupts = <0 65 4>, <0 69 4>;
> + #stream-id-cells = <1>;
> + iommus = <&smmu 0x860>;
> + snps,quirk-frame-length-adjustment = <0x20>;
> + /* dma-coherent; */
> + };
> };
>
> - usb1: usb@fe300000 {
> - compatible = "snps,dwc3";
> + usb1: usb@ff9e0000 {
> + #address-cells = <2>;
> + #size-cells = <2>;
> status = "disabled";
> - interrupt-parent = <&gic>;
> - interrupts = <0 70 4>;
> - reg = <0x0 0xfe300000 0x0 0x40000>;
> - clock-names = "clk_xin", "clk_ahb";
> + compatible = "xlnx,zynqmp-dwc3";
> + reg = <0x0 0xff9e0000 0x0 0x100>;
> + clock-names = "bus_clk", "ref_clk";
> power-domains = <&zynqmp_firmware PD_USB_1>;
> + resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
> + <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>,
> + <&zynqmp_reset ZYNQMP_RESET_USB1_APB>;
> + reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
> + ranges;
> +
> + dwc3_1: usb@fe300000 {
> + compatible = "snps,dwc3";
> + reg = <0x0 0xfe300000 0x0 0x40000>;
> + interrupt-parent = <&gic>;
> + interrupt-names = "dwc_usb3", "otg";
> + interrupts = <0 70 4>, <0 74 4>;
> + #stream-id-cells = <1>;
> + iommus = <&smmu 0x861>;
> + snps,quirk-frame-length-adjustment = <0x20>;
> + /* dma-coherent; */
> + };
> };
>
> watchdog0: watchdog@fd4d0000 {
> --
> 2.32.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
Pengutronix e.K. | Michael Tretter |
Steuerwalder Str. 21 | https://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2021-08-11 10:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-06 10:12 [PATCH v3 0/2] arm64: zynqmp: Extend board description Michal Simek
2021-08-06 10:12 ` [PATCH v3 1/2] arm64: zynqmp: Enable xlnx,zynqmp-dwc3 driver for xilinx boards Michal Simek
2021-08-11 10:12 ` Michael Tretter [this message]
2021-08-25 6:24 ` Michal Simek
2021-08-06 10:12 ` [PATCH v3 2/2] arm64: zynqmp: Add support for Xilinx Kria SOM board Michal Simek
2021-08-13 20:09 ` Rob Herring
2021-08-16 6:14 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210811101247.GC27204@pengutronix.de \
--to=m.tretter@pengutronix.de \
--cc=amit.kumar-mahapatra@xilinx.com \
--cc=devicetree@vger.kernel.org \
--cc=git@xilinx.com \
--cc=kernel@pengutronix.de \
--cc=krzk@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=monstr@monstr.eu \
--cc=quanyang.wang@windriver.com \
--cc=robh+dt@kernel.org \
--cc=viresh.kumar@linaro.org \
--subject='Re: [PATCH v3 1/2] arm64: zynqmp: Enable xlnx, zynqmp-dwc3 driver for xilinx boards' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).