LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Paul Cercueil <paul@crapouillou.net>
To: David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>
Cc: "H . Nikolaus Schaller" <hns@goldelico.com>,
	Paul Boddie <paul@boddie.org.uk>, Sam Ravnborg <sam@ravnborg.org>,
	list@opendingux.net, linux-mips@vger.kernel.org,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH v2 6/6] drm/ingenic: Attach bridge chain to encoders
Date: Wed, 11 Aug 2021 19:23:09 +0200	[thread overview]
Message-ID: <20210811172309.314287-7-paul@crapouillou.net> (raw)
In-Reply-To: <20210811172309.314287-1-paul@crapouillou.net>

Attach a top-level bridge to each encoder, which will be used for
negociating the bus format and flags.

All the bridges are now attached with DRM_BRIDGE_ATTACH_NO_CONNECTOR.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 92 +++++++++++++++++------
 1 file changed, 70 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
index 6f860f2e11c4..cdbdc4d5cc96 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
+++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
@@ -21,6 +21,7 @@
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
 #include <drm/drm_color_mgmt.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
@@ -108,6 +109,19 @@ struct ingenic_drm {
 	struct drm_private_obj private_obj;
 };
 
+struct ingenic_drm_bridge {
+	struct drm_encoder encoder;
+	struct drm_bridge bridge, *next_bridge;
+
+	struct drm_bus_cfg bus_cfg;
+};
+
+static inline struct ingenic_drm_bridge *
+to_ingenic_drm_bridge(struct drm_encoder *encoder)
+{
+	return container_of(encoder, struct ingenic_drm_bridge, encoder);
+}
+
 static inline struct ingenic_drm_private_state *
 to_ingenic_drm_priv_state(struct drm_private_state *state)
 {
@@ -668,11 +682,10 @@ static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
 {
 	struct ingenic_drm *priv = drm_device_get_priv(encoder->dev);
 	struct drm_display_mode *mode = &crtc_state->adjusted_mode;
-	struct drm_connector *conn = conn_state->connector;
-	struct drm_display_info *info = &conn->display_info;
+	struct ingenic_drm_bridge *bridge = to_ingenic_drm_bridge(encoder);
 	unsigned int cfg, rgbcfg = 0;
 
-	priv->panel_is_sharp = info->bus_flags & DRM_BUS_FLAG_SHARP_SIGNALS;
+	priv->panel_is_sharp = bridge->bus_cfg.flags & DRM_BUS_FLAG_SHARP_SIGNALS;
 
 	if (priv->panel_is_sharp) {
 		cfg = JZ_LCD_CFG_MODE_SPECIAL_TFT_1 | JZ_LCD_CFG_REV_POLARITY;
@@ -685,19 +698,19 @@ static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
 		cfg |= JZ_LCD_CFG_HSYNC_ACTIVE_LOW;
 	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
 		cfg |= JZ_LCD_CFG_VSYNC_ACTIVE_LOW;
-	if (info->bus_flags & DRM_BUS_FLAG_DE_LOW)
+	if (bridge->bus_cfg.flags & DRM_BUS_FLAG_DE_LOW)
 		cfg |= JZ_LCD_CFG_DE_ACTIVE_LOW;
-	if (info->bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
+	if (bridge->bus_cfg.flags & DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
 		cfg |= JZ_LCD_CFG_PCLK_FALLING_EDGE;
 
 	if (!priv->panel_is_sharp) {
-		if (conn->connector_type == DRM_MODE_CONNECTOR_TV) {
+		if (conn_state->connector->connector_type == DRM_MODE_CONNECTOR_TV) {
 			if (mode->flags & DRM_MODE_FLAG_INTERLACE)
 				cfg |= JZ_LCD_CFG_MODE_TV_OUT_I;
 			else
 				cfg |= JZ_LCD_CFG_MODE_TV_OUT_P;
 		} else {
-			switch (*info->bus_formats) {
+			switch (bridge->bus_cfg.format) {
 			case MEDIA_BUS_FMT_RGB565_1X16:
 				cfg |= JZ_LCD_CFG_MODE_GENERIC_16BIT;
 				break;
@@ -723,20 +736,29 @@ static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
 	regmap_write(priv->map, JZ_REG_LCD_RGBC, rgbcfg);
 }
 
-static int ingenic_drm_encoder_atomic_check(struct drm_encoder *encoder,
-					    struct drm_crtc_state *crtc_state,
-					    struct drm_connector_state *conn_state)
+static int ingenic_drm_bridge_attach(struct drm_bridge *bridge,
+				     enum drm_bridge_attach_flags flags)
+{
+	struct ingenic_drm_bridge *ib = to_ingenic_drm_bridge(bridge->encoder);
+
+	return drm_bridge_attach(bridge->encoder, ib->next_bridge,
+				 &ib->bridge, flags);
+}
+
+static int ingenic_drm_bridge_atomic_check(struct drm_bridge *bridge,
+					   struct drm_bridge_state *bridge_state,
+					   struct drm_crtc_state *crtc_state,
+					   struct drm_connector_state *conn_state)
 {
-	struct drm_display_info *info = &conn_state->connector->display_info;
 	struct drm_display_mode *mode = &crtc_state->adjusted_mode;
+	struct ingenic_drm_bridge *ib = to_ingenic_drm_bridge(bridge->encoder);
 
-	if (info->num_bus_formats != 1)
-		return -EINVAL;
+	ib->bus_cfg = bridge_state->output_bus_cfg;
 
 	if (conn_state->connector->connector_type == DRM_MODE_CONNECTOR_TV)
 		return 0;
 
-	switch (*info->bus_formats) {
+	switch (bridge_state->output_bus_cfg.format) {
 	case MEDIA_BUS_FMT_RGB888_3X8:
 	case MEDIA_BUS_FMT_RGB888_3X8_DELTA:
 		/*
@@ -900,8 +922,16 @@ static const struct drm_crtc_helper_funcs ingenic_drm_crtc_helper_funcs = {
 };
 
 static const struct drm_encoder_helper_funcs ingenic_drm_encoder_helper_funcs = {
-	.atomic_mode_set	= ingenic_drm_encoder_atomic_mode_set,
-	.atomic_check		= ingenic_drm_encoder_atomic_check,
+	.atomic_mode_set        = ingenic_drm_encoder_atomic_mode_set,
+};
+
+static const struct drm_bridge_funcs ingenic_drm_bridge_funcs = {
+	.attach			= ingenic_drm_bridge_attach,
+	.atomic_check		= ingenic_drm_bridge_atomic_check,
+	.atomic_reset		= drm_atomic_helper_bridge_reset,
+	.atomic_duplicate_state	= drm_atomic_helper_bridge_duplicate_state,
+	.atomic_destroy_state	= drm_atomic_helper_bridge_destroy_state,
+	.atomic_get_input_bus_fmts = drm_atomic_helper_bridge_propagate_bus_fmt,
 };
 
 static const struct drm_mode_config_funcs ingenic_drm_mode_config_funcs = {
@@ -976,7 +1006,9 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
 	struct drm_plane *primary;
 	struct drm_bridge *bridge;
 	struct drm_panel *panel;
+	struct drm_connector *connector;
 	struct drm_encoder *encoder;
+	struct ingenic_drm_bridge *ib;
 	struct drm_device *drm;
 	void __iomem *base;
 	long parent_rate;
@@ -1154,20 +1186,36 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
 			bridge = devm_drm_panel_bridge_add_typed(dev, panel,
 								 DRM_MODE_CONNECTOR_DPI);
 
-		encoder = drmm_plain_encoder_alloc(drm, NULL, DRM_MODE_ENCODER_DPI, NULL);
-		if (IS_ERR(encoder)) {
-			ret = PTR_ERR(encoder);
+		ib = drmm_encoder_alloc(drm, struct ingenic_drm_bridge, encoder,
+					NULL, DRM_MODE_ENCODER_DPI, NULL);
+		if (IS_ERR(ib)) {
+			ret = PTR_ERR(ib);
 			dev_err(dev, "Failed to init encoder: %d\n", ret);
 			return ret;
 		}
 
-		encoder->possible_crtcs = 1;
+		encoder = &ib->encoder;
+		encoder->possible_crtcs = drm_crtc_mask(&priv->crtc);
 
 		drm_encoder_helper_add(encoder, &ingenic_drm_encoder_helper_funcs);
 
-		ret = drm_bridge_attach(encoder, bridge, NULL, 0);
-		if (ret)
+		ib->bridge.funcs = &ingenic_drm_bridge_funcs;
+		ib->next_bridge = bridge;
+
+		ret = drm_bridge_attach(encoder, &ib->bridge, NULL,
+					DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+		if (ret) {
+			dev_err(dev, "Unable to attach bridge\n");
 			return ret;
+		}
+
+		connector = drm_bridge_connector_init(drm, encoder);
+		if (IS_ERR(connector)) {
+			dev_err(dev, "Unable to init connector\n");
+			return PTR_ERR(connector);
+		}
+
+		drm_connector_attach_encoder(connector, encoder);
 	}
 
 	drm_for_each_encoder(encoder, drm) {
-- 
2.30.2


      parent reply	other threads:[~2021-08-11 17:24 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-11 17:23 [PATCH v2 0/6] drm/ingenic: Various improvements v2 Paul Cercueil
2021-08-11 17:23 ` [PATCH v2 1/6] drm/ingenic: Simplify code by using hwdescs array Paul Cercueil
2021-08-11 17:23 ` [PATCH v2 2/6] drm/ingenic: Add support for private objects Paul Cercueil
2021-08-11 17:23 ` [PATCH v2 3/6] drm/ingenic: Move IPU scale settings to private state Paul Cercueil
2021-08-11 17:23 ` [PATCH v2 4/6] drm/ingenic: Set DMA descriptor chain register when starting CRTC Paul Cercueil
2021-08-11 17:23 ` [PATCH v2 5/6] drm/ingenic: Upload palette before frame Paul Cercueil
2021-08-11 17:23 ` Paul Cercueil [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210811172309.314287-7-paul@crapouillou.net \
    --to=paul@crapouillou.net \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=hns@goldelico.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=list@opendingux.net \
    --cc=paul@boddie.org.uk \
    --cc=sam@ravnborg.org \
    --subject='Re: [PATCH v2 6/6] drm/ingenic: Attach bridge chain to encoders' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).