[PATCH v2 1/2] hwmon: (pmbus/bpa-rs600) Don't use rated limits as warn limits

[Chris Packham <chris.packham@alliedtelesis.co.nz>]

In the initial implementation a number of PMBUS_x_WARN_LIMITs were
mapped to MFR fields. This was incorrect as these MFR limits reflect the
rated limit as opposed to a limit which will generate warning. Instead
return -ENXIO like we were already doing for other WARN_LIMITs.

Subsequently these rated limits have been exposed generically as new
fields in the sysfs ABI so the values are still available.

Fixes: 15b2703e5e02 ("hwmon: (pmbus) Add driver for BluTek BPA-RS600")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
    Changes in v2:
    - Reworked to remove the mapping of warning limits to rated limits.

 drivers/hwmon/pmbus/bpa-rs600.c | 25 -------------------------
 1 file changed, 25 deletions(-)

diff --git a/drivers/hwmon/pmbus/bpa-rs600.c b/drivers/hwmon/pmbus/bpa-rs600.c
index d205b41540ce..84dee86399cb 100644
--- a/drivers/hwmon/pmbus/bpa-rs600.c
+++ b/drivers/hwmon/pmbus/bpa-rs600.c
@@ -12,15 +12,6 @@
 #include <linux/pmbus.h>
 #include "pmbus.h"
 
-#define BPARS600_MFR_VIN_MIN	0xa0
-#define BPARS600_MFR_VIN_MAX	0xa1
-#define BPARS600_MFR_IIN_MAX	0xa2
-#define BPARS600_MFR_PIN_MAX	0xa3
-#define BPARS600_MFR_VOUT_MIN	0xa4
-#define BPARS600_MFR_VOUT_MAX	0xa5
-#define BPARS600_MFR_IOUT_MAX	0xa6
-#define BPARS600_MFR_POUT_MAX	0xa7
-
 enum chips { bpa_rs600, bpd_rs600 };
 
 static int bpa_rs600_read_byte_data(struct i2c_client *client, int page, int reg)
@@ -83,29 +74,13 @@ static int bpa_rs600_read_word_data(struct i2c_client *client, int page, int pha
 
 	switch (reg) {
 	case PMBUS_VIN_UV_WARN_LIMIT:
-		ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_VIN_MIN);
-		break;
 	case PMBUS_VIN_OV_WARN_LIMIT:
-		ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_VIN_MAX);
-		break;
 	case PMBUS_VOUT_UV_WARN_LIMIT:
-		ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_VOUT_MIN);
-		break;
 	case PMBUS_VOUT_OV_WARN_LIMIT:
-		ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_VOUT_MAX);
-		break;
 	case PMBUS_IIN_OC_WARN_LIMIT:
-		ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_IIN_MAX);
-		break;
 	case PMBUS_IOUT_OC_WARN_LIMIT:
-		ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_IOUT_MAX);
-		break;
 	case PMBUS_PIN_OP_WARN_LIMIT:
-		ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_PIN_MAX);
-		break;
 	case PMBUS_POUT_OP_WARN_LIMIT:
-		ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_POUT_MAX);
-		break;
 	case PMBUS_VIN_UV_FAULT_LIMIT:
 	case PMBUS_VIN_OV_FAULT_LIMIT:
 	case PMBUS_VOUT_UV_FAULT_LIMIT:
-- 
2.32.0