LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Song Yoong Siang <yoong.siang.song@intel.com>
To: Andrew Lunn <andrew@lunn.ch>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	"David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	Song Yoong Siang <yoong.siang.song@intel.com>
Subject: [PATCH net-next 1/1] net: phy: marvell: Add WAKE_PHY support to WOL event
Date: Fri, 13 Aug 2021 16:45:08 +0800	[thread overview]
Message-ID: <20210813084508.182333-1-yoong.siang.song@intel.com> (raw)

Add Wake-on-PHY feature support by enabling the Link Up Event.

Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
---
 drivers/net/phy/marvell.c | 39 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 36 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 3de93c9f2744..415e2a01c151 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -155,6 +155,7 @@
 
 #define MII_88E1318S_PHY_WOL_CTRL				0x10
 #define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS		BIT(12)
+#define MII_88E1318S_PHY_WOL_CTRL_LINK_UP_ENABLE		BIT(13)
 #define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE	BIT(14)
 
 #define MII_PHY_LED_CTRL	        16
@@ -1746,13 +1747,19 @@ static void m88e1318_get_wol(struct phy_device *phydev,
 {
 	int ret;
 
-	wol->supported = WAKE_MAGIC;
+	wol->supported = WAKE_MAGIC | WAKE_PHY;
 	wol->wolopts = 0;
 
 	ret = phy_read_paged(phydev, MII_MARVELL_WOL_PAGE,
 			     MII_88E1318S_PHY_WOL_CTRL);
-	if (ret >= 0 && ret & MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE)
+	if (ret < 0)
+		return;
+
+	if (ret & MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE)
 		wol->wolopts |= WAKE_MAGIC;
+
+	if (ret & MII_88E1318S_PHY_WOL_CTRL_LINK_UP_ENABLE)
+		wol->wolopts |= WAKE_PHY;
 }
 
 static int m88e1318_set_wol(struct phy_device *phydev,
@@ -1764,7 +1771,7 @@ static int m88e1318_set_wol(struct phy_device *phydev,
 	if (oldpage < 0)
 		goto error;
 
-	if (wol->wolopts & WAKE_MAGIC) {
+	if (wol->wolopts & (WAKE_MAGIC | WAKE_PHY)) {
 		/* Explicitly switch to page 0x00, just to be sure */
 		err = marvell_write_page(phydev, MII_MARVELL_COPPER_PAGE);
 		if (err < 0)
@@ -1796,7 +1803,9 @@ static int m88e1318_set_wol(struct phy_device *phydev,
 				   MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW);
 		if (err < 0)
 			goto error;
+	}
 
+	if (wol->wolopts & WAKE_MAGIC) {
 		err = marvell_write_page(phydev, MII_MARVELL_WOL_PAGE);
 		if (err < 0)
 			goto error;
@@ -1837,6 +1846,30 @@ static int m88e1318_set_wol(struct phy_device *phydev,
 			goto error;
 	}
 
+	if (wol->wolopts & WAKE_PHY) {
+		err = marvell_write_page(phydev, MII_MARVELL_WOL_PAGE);
+		if (err < 0)
+			goto error;
+
+		/* Clear WOL status and enable link up event */
+		err = __phy_modify(phydev, MII_88E1318S_PHY_WOL_CTRL, 0,
+				   MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS |
+				   MII_88E1318S_PHY_WOL_CTRL_LINK_UP_ENABLE);
+		if (err < 0)
+			goto error;
+	} else {
+		err = marvell_write_page(phydev, MII_MARVELL_WOL_PAGE);
+		if (err < 0)
+			goto error;
+
+		/* Clear WOL status and disable link up event */
+		err = __phy_modify(phydev, MII_88E1318S_PHY_WOL_CTRL,
+				   MII_88E1318S_PHY_WOL_CTRL_LINK_UP_ENABLE,
+				   MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS);
+		if (err < 0)
+			goto error;
+	}
+
 error:
 	return phy_restore_page(phydev, oldpage, err);
 }
-- 
2.25.1


             reply	other threads:[~2021-08-13  8:52 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-13  8:45 Song Yoong Siang [this message]
2021-08-14 16:07 ` [PATCH net-next 1/1] net: phy: marvell: Add WAKE_PHY support to WOL event Andrew Lunn
2021-08-16 10:10 ` patchwork-bot+netdevbpf
2021-08-16 10:10 ` Russell King (Oracle)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210813084508.182333-1-yoong.siang.song@intel.com \
    --to=yoong.siang.song@intel.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).