LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>
To: Johan Hovold <johan@kernel.org>, Alex Elder <elder@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	greybus-dev@lists.linaro.org, linux-staging@lists.linux.dev,
	linux-kernel@vger.kernel.org
Cc: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>,
	kernel test robot <lkp@intel.com>
Subject: [PATCH v2] staging: greybus: Convert uart.c from IDR to XArray
Date: Sat, 14 Aug 2021 20:11:30 +0200	[thread overview]
Message-ID: <20210814181130.21383-1-fmdefrancesco@gmail.com> (raw)

Convert greybus/uart.c from IDR to XArray. The abstract data type XArray
is more memory-efficient, parallelisable, and cache friendly. It takes
advantage of RCU to perform lookups without locking. Furthermore, IDR is
deprecated because XArray has a better (cleaner and more consistent) API.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
---

v1->v2:
        Fixed an issue found by the kernel test robot. It was due to
        passing to xa_*lock() the same old mutex that IDR used with
        the previous version of the code.

 drivers/staging/greybus/uart.c | 29 ++++++++++++++---------------
 1 file changed, 14 insertions(+), 15 deletions(-)

diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c
index 73f01ed1e5b7..5bf993e40f84 100644
--- a/drivers/staging/greybus/uart.c
+++ b/drivers/staging/greybus/uart.c
@@ -22,7 +22,7 @@
 #include <linux/serial.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
-#include <linux/idr.h>
+#include <linux/xarray.h>
 #include <linux/fs.h>
 #include <linux/kdev_t.h>
 #include <linux/kfifo.h>
@@ -33,6 +33,7 @@
 #include "gbphy.h"
 
 #define GB_NUM_MINORS	16	/* 16 is more than enough */
+#define GB_RANGE_MINORS		XA_LIMIT(0, GB_NUM_MINORS)
 #define GB_NAME		"ttyGB"
 
 #define GB_UART_WRITE_FIFO_SIZE		PAGE_SIZE
@@ -67,8 +68,7 @@ struct gb_tty {
 };
 
 static struct tty_driver *gb_tty_driver;
-static DEFINE_IDR(tty_minors);
-static DEFINE_MUTEX(table_lock);
+static DEFINE_XARRAY(tty_minors);
 
 static int gb_uart_receive_data_handler(struct gb_operation *op)
 {
@@ -77,6 +77,7 @@ static int gb_uart_receive_data_handler(struct gb_operation *op)
 	struct tty_port *port = &gb_tty->port;
 	struct gb_message *request = op->request;
 	struct gb_uart_recv_data_request *receive_data;
+
 	u16 recv_data_size;
 	int count;
 	unsigned long tty_flags = TTY_NORMAL;
@@ -341,8 +342,8 @@ static struct gb_tty *get_gb_by_minor(unsigned int minor)
 {
 	struct gb_tty *gb_tty;
 
-	mutex_lock(&table_lock);
-	gb_tty = idr_find(&tty_minors, minor);
+	xa_lock(&tty_minors);
+	gb_tty = xa_load(&tty_minors, minor);
 	if (gb_tty) {
 		mutex_lock(&gb_tty->mutex);
 		if (gb_tty->disconnected) {
@@ -353,19 +354,19 @@ static struct gb_tty *get_gb_by_minor(unsigned int minor)
 			mutex_unlock(&gb_tty->mutex);
 		}
 	}
-	mutex_unlock(&table_lock);
+	xa_unlock(&tty_minors);
 	return gb_tty;
 }
 
 static int alloc_minor(struct gb_tty *gb_tty)
 {
 	int minor;
+	int ret;
 
-	mutex_lock(&table_lock);
-	minor = idr_alloc(&tty_minors, gb_tty, 0, GB_NUM_MINORS, GFP_KERNEL);
-	mutex_unlock(&table_lock);
-	if (minor >= 0)
-		gb_tty->minor = minor;
+	ret = xa_alloc(&tty_minors, &minor, gb_tty, GB_RANGE_MINORS, GFP_KERNEL);
+	if (ret)
+		return ret;
+	gb_tty->minor = minor;
 	return minor;
 }
 
@@ -374,9 +375,7 @@ static void release_minor(struct gb_tty *gb_tty)
 	int minor = gb_tty->minor;
 
 	gb_tty->minor = 0;	/* Maybe should use an invalid value instead */
-	mutex_lock(&table_lock);
-	idr_remove(&tty_minors, minor);
-	mutex_unlock(&table_lock);
+	xa_erase(&tty_minors, minor);
 }
 
 static int gb_tty_install(struct tty_driver *driver, struct tty_struct *tty)
@@ -982,7 +981,7 @@ static void gb_tty_exit(void)
 {
 	tty_unregister_driver(gb_tty_driver);
 	put_tty_driver(gb_tty_driver);
-	idr_destroy(&tty_minors);
+	xa_destroy(&tty_minors);
 }
 
 static const struct gbphy_device_id gb_uart_id_table[] = {
-- 
2.32.0


             reply	other threads:[~2021-08-14 18:11 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-14 18:11 Fabio M. De Francesco [this message]
2021-08-16 14:46 ` Alex Elder
2021-08-16 15:01   ` Greg Kroah-Hartman
2021-08-16 15:06     ` Dan Carpenter
2021-08-16 15:10       ` [greybus-dev] " Alex Elder
2021-08-16 18:36         ` Dan Carpenter
2021-08-16 18:38           ` Dan Carpenter
2021-08-16 19:17           ` Alex Elder
2021-08-17  4:58             ` Dan Carpenter
2021-08-16 16:55   ` Fabio M. De Francesco
2021-08-17 10:17   ` Fabio M. De Francesco
2021-08-25  5:20   ` Fabio M. De Francesco
2021-08-25 13:45     ` [greybus-dev] " Alex Elder
2021-08-26 15:57       ` Fabio M. De Francesco

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210814181130.21383-1-fmdefrancesco@gmail.com \
    --to=fmdefrancesco@gmail.com \
    --cc=elder@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=greybus-dev@lists.linaro.org \
    --cc=johan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=lkp@intel.com \
    --subject='Re: [PATCH v2] staging: greybus: Convert uart.c from IDR to XArray' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).