LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Evgeny Novikov <novikov@ispras.ru>
Cc: Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Ramuthevar Vadivel Murugan 
	<vadivel.muruganx.ramuthevar@linux.intel.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Christophe JAILLET <christophe.jaillet@wanadoo.fr>,
	Kirill Shilimanov <kirill.shilimanov@huawei.com>,
	Anton Vasilyev <vasilyev@ispras.ru>,
	linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
	ldv-project@linuxtesting.org
Subject: Re: [PATCH] mtd: rawnand: intel: Fix error handling in probe
Date: Mon, 16 Aug 2021 09:48:38 +0200	[thread overview]
Message-ID: <20210816094838.78c8e248@xps13> (raw)
In-Reply-To: <20210812110100.1279-1-novikov@ispras.ru>

Hi Evgeny,

Evgeny Novikov <novikov@ispras.ru> wrote on Thu, 12 Aug 2021 14:01:00
+0300:

> ebu_nand_probe() did not invoke ebu_dma_cleanup() and
> clk_disable_unprepare() on some error handling paths. The patch fixes
> that.
> 
> Found by Linux Driver Verification project (linuxtesting.org).

LGTM

Can you add a Fixes: tag and possibly a Cc: stable tag as well?
(same for "mtd: rawnand: mxic: Enable and prepare clocks in probe")

> 
> Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
> Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
> Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
> Co-developed-by: Anton Vasilyev <vasilyev@ispras.ru>
> Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
> ---
>  drivers/mtd/nand/raw/intel-nand-controller.c | 27 +++++++++++++-------
>  1 file changed, 18 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/intel-nand-controller.c b/drivers/mtd/nand/raw/intel-nand-controller.c
> index 8b49fd56cf96..29e8a546dcd6 100644
> --- a/drivers/mtd/nand/raw/intel-nand-controller.c
> +++ b/drivers/mtd/nand/raw/intel-nand-controller.c
> @@ -631,19 +631,26 @@ static int ebu_nand_probe(struct platform_device *pdev)
>  	ebu_host->clk_rate = clk_get_rate(ebu_host->clk);
>  
>  	ebu_host->dma_tx = dma_request_chan(dev, "tx");
> -	if (IS_ERR(ebu_host->dma_tx))
> -		return dev_err_probe(dev, PTR_ERR(ebu_host->dma_tx),
> -				     "failed to request DMA tx chan!.\n");
> +	if (IS_ERR(ebu_host->dma_tx)) {
> +		ret = dev_err_probe(dev, PTR_ERR(ebu_host->dma_tx),
> +				    "failed to request DMA tx chan!.\n");
> +		goto err_disable_unprepare_clk;
> +	}
>  
>  	ebu_host->dma_rx = dma_request_chan(dev, "rx");
> -	if (IS_ERR(ebu_host->dma_rx))
> -		return dev_err_probe(dev, PTR_ERR(ebu_host->dma_rx),
> -				     "failed to request DMA rx chan!.\n");
> +	if (IS_ERR(ebu_host->dma_rx)) {
> +		ret = dev_err_probe(dev, PTR_ERR(ebu_host->dma_rx),
> +				    "failed to request DMA rx chan!.\n");
> +		ebu_host->dma_rx = NULL;
> +		goto err_cleanup_dma;
> +	}
>  
>  	resname = devm_kasprintf(dev, GFP_KERNEL, "addr_sel%d", cs);
>  	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, resname);
> -	if (!res)
> -		return -EINVAL;
> +	if (!res) {
> +		ret = -EINVAL;
> +		goto err_cleanup_dma;
> +	}
>  	ebu_host->cs[cs].addr_sel = res->start;
>  	writel(ebu_host->cs[cs].addr_sel | EBU_ADDR_MASK(5) | EBU_ADDR_SEL_REGEN,
>  	       ebu_host->ebu + EBU_ADDR_SEL(cs));
> @@ -653,7 +660,8 @@ static int ebu_nand_probe(struct platform_device *pdev)
>  	mtd = nand_to_mtd(&ebu_host->chip);
>  	if (!mtd->name) {
>  		dev_err(ebu_host->dev, "NAND label property is mandatory\n");
> -		return -EINVAL;
> +		ret = -EINVAL;
> +		goto err_cleanup_dma;
>  	}
>  
>  	mtd->dev.parent = dev;
> @@ -681,6 +689,7 @@ static int ebu_nand_probe(struct platform_device *pdev)
>  	nand_cleanup(&ebu_host->chip);
>  err_cleanup_dma:
>  	ebu_dma_cleanup(ebu_host);
> +err_disable_unprepare_clk:
>  	clk_disable_unprepare(ebu_host->clk);
>  
>  	return ret;

Thanks,
Miquèl

      reply	other threads:[~2021-08-16  7:48 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-12 11:01 Evgeny Novikov
2021-08-16  7:48 ` Miquel Raynal [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210816094838.78c8e248@xps13 \
    --to=miquel.raynal@bootlin.com \
    --cc=christophe.jaillet@wanadoo.fr \
    --cc=kirill.shilimanov@huawei.com \
    --cc=ldv-project@linuxtesting.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=novikov@ispras.ru \
    --cc=richard@nod.at \
    --cc=vadivel.muruganx.ramuthevar@linux.intel.com \
    --cc=vasilyev@ispras.ru \
    --cc=vigneshr@ti.com \
    --subject='Re: [PATCH] mtd: rawnand: intel: Fix error handling in probe' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).