LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Kate Hsuan <hpa@redhat.com>
To: Alex Hung <alex.hung@canonical.com>,
	Hans de Goede <hdegoede@redhat.com>,
	Mark Gross <mgross@linux.intel.com>,
	Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
	AceLan Kao <acelan.kao@canonical.com>,
	Jithu Joseph <jithu.joseph@intel.com>,
	Maurice Ma <maurice.ma@intel.com>,
	Sujith Thomas <sujith.thomas@intel.com>,
	Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>,
	Zha Qipeng <qipeng.zha@intel.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	"David E . Box" <david.e.box@linux.intel.com>,
	linux-kernel@vger.kernel.org, Dell.Client.Kernel@dell.com
Cc: platform-driver-x86@vger.kernel.org, Kate Hsuan <hpa@redhat.com>
Subject: [PATCH v2 14/20] platform/x86: intel_atomisp2_led: Move to intel sub-directory
Date: Mon, 16 Aug 2021 18:51:13 +0800	[thread overview]
Message-ID: <20210816105119.704302-15-hpa@redhat.com> (raw)
In-Reply-To: <20210816105119.704302-1-hpa@redhat.com>

Move intel_atomisp2_led to intel sub-directory to improve
readability.

Signed-off-by: Kate Hsuan <hpa@redhat.com>
---
 drivers/platform/x86/Kconfig                  | 34 ------------------
 drivers/platform/x86/Makefile                 |  2 --
 drivers/platform/x86/intel/Kconfig            |  1 +
 drivers/platform/x86/intel/Makefile           |  2 ++
 drivers/platform/x86/intel/atomisp2/Kconfig   | 35 +++++++++++++++++++
 drivers/platform/x86/intel/atomisp2/Makefile  |  5 +++
 .../atomisp2/led.c}                           |  0
 .../atomisp2/pm.c}                            |  0
 8 files changed, 43 insertions(+), 36 deletions(-)
 create mode 100644 drivers/platform/x86/intel/atomisp2/Kconfig
 create mode 100644 drivers/platform/x86/intel/atomisp2/Makefile
 rename drivers/platform/x86/{intel_atomisp2_led.c => intel/atomisp2/led.c} (100%)
 rename drivers/platform/x86/{intel_atomisp2_pm.c => intel/atomisp2/pm.c} (100%)

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index b864e37c6781..ac4ec4e2534a 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -667,40 +667,6 @@ config THINKPAD_LMI
 
 source "drivers/platform/x86/intel/Kconfig"
 
-config INTEL_ATOMISP2_LED
-	tristate "Intel AtomISP2 camera LED driver"
-	depends on GPIOLIB && LEDS_GPIO
-	help
-	  Many Bay Trail and Cherry Trail devices come with a camera attached
-	  to Intel's Image Signal Processor. Linux currently does not have a
-	  driver for these, so they do not work as a camera. Some of these
-	  camera's have a LED which is controlled through a GPIO.
-
-	  Some of these devices have a firmware issue where the LED gets turned
-	  on at boot. This driver will turn the LED off at boot and also allows
-	  controlling the LED (repurposing it) through the sysfs LED interface.
-
-	  Which GPIO is attached to the LED is usually not described in the
-	  ACPI tables, so this driver contains per-system info about the GPIO
-	  inside the driver, this means that this driver only works on systems
-	  the driver knows about.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called intel_atomisp2_led.
-
-config INTEL_ATOMISP2_PM
-	tristate "Intel AtomISP2 dummy / power-management driver"
-	depends on PCI && IOSF_MBI && PM
-	depends on !INTEL_ATOMISP
-	help
-	  Power-management driver for Intel's Image Signal Processor found on
-	  Bay Trail and Cherry Trail devices. This dummy driver's sole purpose
-	  is to turn the ISP off (put it in D3) to save power and to allow
-	  entering of S0ix modes.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called intel_atomisp2_pm.
-
 config INTEL_HID_EVENT
 	tristate "INTEL HID Event"
 	depends on ACPI
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index f30cee767252..b5327b6f774a 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -71,8 +71,6 @@ obj-$(CONFIG_THINKPAD_LMI)	+= think-lmi.o
 # Intel
 obj-$(CONFIG_X86_PLATFORM_DRIVERS_INTEL)		+= intel/
 
-obj-$(CONFIG_INTEL_ATOMISP2_LED)	+= intel_atomisp2_led.o
-obj-$(CONFIG_INTEL_ATOMISP2_PM)		+= intel_atomisp2_pm.o
 obj-$(CONFIG_INTEL_HID_EVENT)		+= intel-hid.o
 obj-$(CONFIG_INTEL_INT0002_VGPIO)	+= intel_int0002_vgpio.o
 obj-$(CONFIG_INTEL_MENLOW)		+= intel_menlow.o
diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig
index 01c73d184461..443554133f20 100644
--- a/drivers/platform/x86/intel/Kconfig
+++ b/drivers/platform/x86/intel/Kconfig
@@ -19,6 +19,7 @@ if X86_PLATFORM_DRIVERS_INTEL
 source "drivers/platform/x86/intel/int33fe/Kconfig"
 source "drivers/platform/x86/intel/int3472/Kconfig"
 source "drivers/platform/x86/intel/pmt/Kconfig"
+source "drivers/platform/x86/intel/atomisp2/Kconfig"
 
 config INTEL_BXTWC_PMIC_TMU
 	tristate "Intel BXT Whiskey Cove TMU Driver"
diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile
index ae2a3cec8d82..fd2d274f294f 100644
--- a/drivers/platform/x86/intel/Makefile
+++ b/drivers/platform/x86/intel/Makefile
@@ -7,6 +7,8 @@
 obj-$(CONFIG_INTEL_CHT_INT33FE)		+= int33fe/
 obj-$(CONFIG_INTEL_SKL_INT3472)		+= int3472/
 obj-$(CONFIG_INTEL_PMT_CLASS)		+= pmt/
+obj-$(CONFIG_INTEL_ATOMISP2_LED)	+= atomisp2/
+obj-$(CONFIG_INTEL_ATOMISP2_PM)		+= atomisp2/
 
 # Intel PMIC / PMC / P-Unit devices
 intel_bxtwc_tmu-y 					:= bxtwc_tmu.o
diff --git a/drivers/platform/x86/intel/atomisp2/Kconfig b/drivers/platform/x86/intel/atomisp2/Kconfig
new file mode 100644
index 000000000000..49305b8605fe
--- /dev/null
+++ b/drivers/platform/x86/intel/atomisp2/Kconfig
@@ -0,0 +1,35 @@
+
+config INTEL_ATOMISP2_LED
+	tristate "Intel AtomISP2 camera LED driver"
+	depends on GPIOLIB && LEDS_GPIO
+	help
+	  Many Bay Trail and Cherry Trail devices come with a camera attached
+	  to Intel's Image Signal Processor. Linux currently does not have a
+	  driver for these, so they do not work as a camera. Some of these
+	  camera's have a LED which is controlled through a GPIO.
+
+	  Some of these devices have a firmware issue where the LED gets turned
+	  on at boot. This driver will turn the LED off at boot and also allows
+	  controlling the LED (repurposing it) through the sysfs LED interface.
+
+	  Which GPIO is attached to the LED is usually not described in the
+	  ACPI tables, so this driver contains per-system info about the GPIO
+	  inside the driver, this means that this driver only works on systems
+	  the driver knows about.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_atomisp2_led.
+
+config INTEL_ATOMISP2_PM
+	tristate "Intel AtomISP2 dummy / power-management driver"
+	depends on PCI && IOSF_MBI && PM
+	depends on !INTEL_ATOMISP
+	help
+	  Power-management driver for Intel's Image Signal Processor found on
+	  Bay Trail and Cherry Trail devices. This dummy driver's sole purpose
+	  is to turn the ISP off (put it in D3) to save power and to allow
+	  entering of S0ix modes.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_atomisp2_pm.
+
diff --git a/drivers/platform/x86/intel/atomisp2/Makefile b/drivers/platform/x86/intel/atomisp2/Makefile
new file mode 100644
index 000000000000..6937ff24861e
--- /dev/null
+++ b/drivers/platform/x86/intel/atomisp2/Makefile
@@ -0,0 +1,5 @@
+
+intel_atomisp2_led-y 				:= led.o
+obj-$(CONFIG_INTEL_ATOMISP2_LED)	+= intel_atomisp2_led.o
+intel_atomisp2_pm-y					+= pm.o
+obj-$(CONFIG_INTEL_ATOMISP2_PM)		+= intel_atomisp2_pm.o
diff --git a/drivers/platform/x86/intel_atomisp2_led.c b/drivers/platform/x86/intel/atomisp2/led.c
similarity index 100%
rename from drivers/platform/x86/intel_atomisp2_led.c
rename to drivers/platform/x86/intel/atomisp2/led.c
diff --git a/drivers/platform/x86/intel_atomisp2_pm.c b/drivers/platform/x86/intel/atomisp2/pm.c
similarity index 100%
rename from drivers/platform/x86/intel_atomisp2_pm.c
rename to drivers/platform/x86/intel/atomisp2/pm.c
-- 
2.31.1


  parent reply	other threads:[~2021-08-16 10:54 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-16 10:50 [PATCH v2 00/20] Intel platform driver code movement Kate Hsuan
2021-08-16 10:51 ` [PATCH v2 01/20] platform/x86: intel_bxtwc_tmu: Move to intel sub-directory Kate Hsuan
2021-08-16 10:51 ` [PATCH v2 02/20] platform/x86: intel_chtdc_ti_pwrbtn: " Kate Hsuan
2021-08-16 10:51 ` [PATCH v2 03/20] platform/x86: intel_mrfld_pwrbtn: " Kate Hsuan
2021-08-16 10:51 ` [PATCH v2 04/20] platform/x86: intel_punit_ipc: " Kate Hsuan
2021-08-16 10:51 ` [PATCH v2 05/20] platform/x86: intel_pmc_core: " Kate Hsuan
2021-08-16 10:51 ` [PATCH v2 06/20] platform/x86: intel_scu: " Kate Hsuan
2021-08-17  9:15   ` Mika Westerberg
2021-08-17 12:30     ` Kate Hsuan
2021-08-16 10:51 ` [PATCH v2 07/20] platform/x86: intel_telemetry: " Kate Hsuan
2021-08-16 10:51 ` [PATCH v2 08/20] platform/x86: intel_ips: " Kate Hsuan
2021-08-16 10:51 ` [PATCH v2 09/20] platform/x86: intel-rst: " Kate Hsuan
2021-08-16 10:51 ` [PATCH v2 10/20] platform/x86: intel-smartconnect: " Kate Hsuan
2021-08-16 10:51 ` [PATCH v2 11/20] platform/x86: intel_turbo_max_3: " Kate Hsuan
2021-08-16 14:51   ` Pandruvada, Srinivas
2021-08-17  1:44     ` Kate Hsuan
2021-08-16 10:51 ` [PATCH v2 12/20] platform/x86: intel-uncore-frequency: " Kate Hsuan
2021-08-16 10:51 ` [PATCH v2 13/20] platform/x86: intel_speed_select_if: " Kate Hsuan
2021-08-16 10:51 ` Kate Hsuan [this message]
2021-08-16 10:51 ` [PATCH v2 15/20] platform/x86: intel-hid: " Kate Hsuan
2021-08-16 10:51 ` [PATCH v2 16/20] platform/x86: intel_int0002_vgpio: " Kate Hsuan
2021-08-16 10:51 ` [PATCH v2 17/20] platform/x86: intel_oaktrail.c: " Kate Hsuan
2021-08-16 10:51 ` [PATCH v2 18/20] platform/x86: intel-vbtn: " Kate Hsuan
2021-08-16 10:51 ` [PATCH v2 19/20] platform/x86: intel-wmi-sbl-fw-updat: " Kate Hsuan
2021-08-16 10:51 ` [PATCH v2 20/20] platform/x86: intel-wmi-thunderbolt: " Kate Hsuan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210816105119.704302-15-hpa@redhat.com \
    --to=hpa@redhat.com \
    --cc=Dell.Client.Kernel@dell.com \
    --cc=acelan.kao@canonical.com \
    --cc=alex.hung@canonical.com \
    --cc=david.e.box@linux.intel.com \
    --cc=hdegoede@redhat.com \
    --cc=irenic.rajneesh@gmail.com \
    --cc=jithu.joseph@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maurice.ma@intel.com \
    --cc=mgross@linux.intel.com \
    --cc=mika.westerberg@linux.intel.com \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=qipeng.zha@intel.com \
    --cc=srinivas.pandruvada@linux.intel.com \
    --cc=sujith.thomas@intel.com \
    --subject='Re: [PATCH v2 14/20] platform/x86: intel_atomisp2_led: Move to intel sub-directory' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).