LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	David Thompson <davthompson@nvidia.com>,
	linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
	netdev@vger.kernel.org, linux-acpi@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Asmaa Mnebhi <asmaa@nvidia.com>, Liming Sun <limings@nvidia.com>
Subject: [PATCH v1 6/6] TODO: net: mellanox: mlxbf_gige: Replace non-standard interrupt handling
Date: Mon, 16 Aug 2021 14:59:53 +0300	[thread overview]
Message-ID: <20210816115953.72533-7-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20210816115953.72533-1-andriy.shevchenko@linux.intel.com>

Since GPIO driver supports interrupt handling, replace custom routine with
simple IRQ request.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 .../mellanox/mlxbf_gige/mlxbf_gige_gpio.c     | 212 ------------------
 1 file changed, 212 deletions(-)
 delete mode 100644 drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_gpio.c

diff --git a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_gpio.c b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_gpio.c
deleted file mode 100644
index a8d966db5715..000000000000
--- a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_gpio.c
+++ /dev/null
@@ -1,212 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause
-
-/* Initialize and handle GPIO interrupt triggered by INT_N PHY signal.
- * This GPIO interrupt triggers the PHY state machine to bring the link
- * up/down.
- *
- * Copyright (C) 2021 NVIDIA CORPORATION & AFFILIATES
- */
-
-#include <linux/acpi.h>
-#include <linux/bitfield.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/gpio/driver.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/irqreturn.h>
-#include <linux/platform_device.h>
-#include <linux/property.h>
-
-#include "mlxbf_gige.h"
-#include "mlxbf_gige_regs.h"
-
-#define MLXBF_GIGE_GPIO_CAUSE_FALL_EN		0x48
-#define MLXBF_GIGE_GPIO_CAUSE_OR_CAUSE_EVTEN0	0x80
-#define MLXBF_GIGE_GPIO_CAUSE_OR_EVTEN0		0x94
-#define MLXBF_GIGE_GPIO_CAUSE_OR_CLRCAUSE	0x98
-
-static void mlxbf_gige_gpio_enable(struct mlxbf_gige *priv)
-{
-	unsigned long flags;
-	u32 val;
-
-	spin_lock_irqsave(&priv->gpio_lock, flags);
-	val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_CLRCAUSE);
-	val |= priv->phy_int_gpio_mask;
-	writel(val, priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_CLRCAUSE);
-
-	/* The INT_N interrupt level is active low.
-	 * So enable cause fall bit to detect when GPIO
-	 * state goes low.
-	 */
-	val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_FALL_EN);
-	val |= priv->phy_int_gpio_mask;
-	writel(val, priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_FALL_EN);
-
-	/* Enable PHY interrupt by setting the priority level */
-	val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_EVTEN0);
-	val |= priv->phy_int_gpio_mask;
-	writel(val, priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_EVTEN0);
-	spin_unlock_irqrestore(&priv->gpio_lock, flags);
-}
-
-static void mlxbf_gige_gpio_disable(struct mlxbf_gige *priv)
-{
-	unsigned long flags;
-	u32 val;
-
-	spin_lock_irqsave(&priv->gpio_lock, flags);
-	val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_EVTEN0);
-	val &= ~priv->phy_int_gpio_mask;
-	writel(val, priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_EVTEN0);
-	spin_unlock_irqrestore(&priv->gpio_lock, flags);
-}
-
-static irqreturn_t mlxbf_gige_gpio_handler(int irq, void *ptr)
-{
-	struct mlxbf_gige *priv;
-	u32 val;
-
-	priv = ptr;
-
-	/* Check if this interrupt is from PHY device.
-	 * Return if it is not.
-	 */
-	val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_CAUSE_EVTEN0);
-	if (!(val & priv->phy_int_gpio_mask))
-		return IRQ_NONE;
-
-	/* Clear interrupt when done, otherwise, no further interrupt
-	 * will be triggered.
-	 */
-	val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_CLRCAUSE);
-	val |= priv->phy_int_gpio_mask;
-	writel(val, priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_CLRCAUSE);
-
-	generic_handle_irq(priv->phy_irq);
-
-	return IRQ_HANDLED;
-}
-
-static void mlxbf_gige_gpio_mask(struct irq_data *irqd)
-{
-	struct mlxbf_gige *priv = irq_data_get_irq_chip_data(irqd);
-
-	mlxbf_gige_gpio_disable(priv);
-}
-
-static void mlxbf_gige_gpio_unmask(struct irq_data *irqd)
-{
-	struct mlxbf_gige *priv = irq_data_get_irq_chip_data(irqd);
-
-	mlxbf_gige_gpio_enable(priv);
-}
-
-static struct irq_chip mlxbf_gige_gpio_chip = {
-	.name			= "mlxbf_gige_phy",
-	.irq_mask		= mlxbf_gige_gpio_mask,
-	.irq_unmask		= mlxbf_gige_gpio_unmask,
-};
-
-static int mlxbf_gige_gpio_domain_map(struct irq_domain *d,
-				      unsigned int irq,
-				      irq_hw_number_t hwirq)
-{
-	irq_set_chip_data(irq, d->host_data);
-	irq_set_chip_and_handler(irq, &mlxbf_gige_gpio_chip, handle_simple_irq);
-	irq_set_noprobe(irq);
-
-	return 0;
-}
-
-static const struct irq_domain_ops mlxbf_gige_gpio_domain_ops = {
-	.map    = mlxbf_gige_gpio_domain_map,
-	.xlate	= irq_domain_xlate_twocell,
-};
-
-#ifdef CONFIG_ACPI
-static int mlxbf_gige_gpio_resources(struct acpi_resource *ares,
-				     void *data)
-{
-	struct acpi_resource_gpio *gpio;
-	u32 *phy_int_gpio = data;
-
-	if (ares->type == ACPI_RESOURCE_TYPE_GPIO) {
-		gpio = &ares->data.gpio;
-		*phy_int_gpio = gpio->pin_table[0];
-	}
-
-	return 1;
-}
-#endif
-
-void mlxbf_gige_gpio_free(struct mlxbf_gige *priv)
-{
-	irq_dispose_mapping(priv->phy_irq);
-	irq_domain_remove(priv->irqdomain);
-}
-
-int mlxbf_gige_gpio_init(struct platform_device *pdev,
-			 struct mlxbf_gige *priv)
-{
-	struct device *dev = &pdev->dev;
-	struct resource *res;
-	u32 phy_int_gpio = 0;
-	int ret;
-
-	LIST_HEAD(resources);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, MLXBF_GIGE_RES_GPIO0);
-	if (!res)
-		return -ENODEV;
-
-	priv->gpio_io = devm_ioremap(dev, res->start, resource_size(res));
-	if (!priv->gpio_io)
-		return -ENOMEM;
-
-#ifdef CONFIG_ACPI
-	ret = acpi_dev_get_resources(ACPI_COMPANION(dev),
-				     &resources, mlxbf_gige_gpio_resources,
-				     &phy_int_gpio);
-	acpi_dev_free_resource_list(&resources);
-	if (ret < 0 || !phy_int_gpio) {
-		dev_err(dev, "Error retrieving the gpio phy pin");
-		return -EINVAL;
-	}
-#endif
-
-	priv->phy_int_gpio_mask = BIT(phy_int_gpio);
-
-	mlxbf_gige_gpio_disable(priv);
-
-	priv->hw_phy_irq = platform_get_irq(pdev, MLXBF_GIGE_PHY_INT_N);
-
-	priv->irqdomain = irq_domain_add_simple(NULL, 1, 0,
-						&mlxbf_gige_gpio_domain_ops,
-						priv);
-	if (!priv->irqdomain) {
-		dev_err(dev, "Failed to add IRQ domain\n");
-		return -ENOMEM;
-	}
-
-	priv->phy_irq = irq_create_mapping(priv->irqdomain, 0);
-	if (!priv->phy_irq) {
-		irq_domain_remove(priv->irqdomain);
-		priv->irqdomain = NULL;
-		dev_err(dev, "Error mapping PHY IRQ\n");
-		return -EINVAL;
-	}
-
-	ret = devm_request_irq(dev, priv->hw_phy_irq, mlxbf_gige_gpio_handler,
-			       IRQF_ONESHOT | IRQF_SHARED, "mlxbf_gige_phy", priv);
-	if (ret) {
-		dev_err(dev, "Failed to request PHY IRQ");
-		mlxbf_gige_gpio_free(priv);
-		return ret;
-	}
-
-	return ret;
-}
-- 
2.30.2


  parent reply	other threads:[~2021-08-16 12:01 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-16 11:59 [PATCH v1 0/6] gpio: mlxbf2: Introduce proper " Andy Shevchenko
2021-08-16 11:59 ` [PATCH v1 1/6] gpio: mlxbf2: Convert to device PM ops Andy Shevchenko
2021-08-16 13:04   ` Asmaa Mnebhi
2021-08-16 11:59 ` [PATCH v1 2/6] gpio: mlxbf2: Drop wrong use of ACPI_PTR() Andy Shevchenko
2021-08-16 13:05   ` Asmaa Mnebhi
2021-08-16 19:20   ` Bartosz Golaszewski
2021-08-16 19:33     ` Andy Shevchenko
2021-08-16 11:59 ` [PATCH v1 3/6] gpio: mlxbf2: Use devm_platform_ioremap_resource() Andy Shevchenko
2021-08-16 13:05   ` Asmaa Mnebhi
2021-08-16 11:59 ` [PATCH v1 4/6] gpio: mlxbf2: Use DEFINE_RES_MEM_NAMED() helper macro Andy Shevchenko
2021-08-16 13:07   ` Asmaa Mnebhi
2021-08-16 11:59 ` [PATCH v1 5/6] TODO: gpio: mlxbf2: Introduce IRQ support Andy Shevchenko
2021-08-16 21:34   ` Asmaa Mnebhi
2021-08-18 14:07     ` Andy Shevchenko
2021-08-18 22:40       ` Andrew Lunn
2021-08-19 12:28         ` Asmaa Mnebhi
2021-09-15 19:27       ` Asmaa Mnebhi
2021-09-15 20:19         ` Andrew Lunn
2021-08-16 11:59 ` Andy Shevchenko [this message]
2021-08-16 23:06   ` [PATCH v1 6/6] TODO: net: mellanox: mlxbf_gige: Replace non-standard interrupt handling Linus Walleij
2021-08-17  9:05     ` Andy Shevchenko
2021-08-16 12:06 ` [PATCH v1 0/6] gpio: mlxbf2: Introduce proper " Andy Shevchenko
2021-08-16 19:22 ` Bartosz Golaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210816115953.72533-7-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=asmaa@nvidia.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=davem@davemloft.net \
    --cc=davthompson@nvidia.com \
    --cc=kuba@kernel.org \
    --cc=limings@nvidia.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=rjw@rjwysocki.net \
    --subject='Re: [PATCH v1 6/6] TODO: net: mellanox: mlxbf_gige: Replace non-standard interrupt handling' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).