LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Leonardo Bras <leobras.c@gmail.com>
To: Michael Ellerman <mpe@ellerman.id.au>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Leonardo Bras <leobras.c@gmail.com>,
Alexey Kardashevskiy <aik@ozlabs.ru>,
Frederic Barrat <fbarrat@linux.ibm.com>,
David Gibson <david@gibson.dropbear.id.au>,
Nicolin Chen <nicoleotsuka@gmail.com>,
kernel test robot <lkp@intel.com>
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH v6 05/11] powerpc/pseries/iommu: Allow DDW windows starting at 0x00
Date: Tue, 17 Aug 2021 03:39:23 -0300 [thread overview]
Message-ID: <20210817063929.38701-6-leobras.c@gmail.com> (raw)
In-Reply-To: <20210817063929.38701-1-leobras.c@gmail.com>
enable_ddw() currently returns the address of the DMA window, which is
considered invalid if has the value 0x00.
Also, it only considers valid an address returned from find_existing_ddw
if it's not 0x00.
Changing this behavior makes sense, given the users of enable_ddw() only
need to know if direct mapping is possible. It can also allow a DMA window
starting at 0x00 to be used.
This will be helpful for using a DDW with indirect mapping, as the window
address will be different than 0x00, but it will not map the whole
partition.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
---
arch/powerpc/platforms/pseries/iommu.c | 36 +++++++++++++-------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 712d1667144a..b34b473bbdc1 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -853,25 +853,26 @@ static void remove_ddw(struct device_node *np, bool remove_prop)
np, ret);
}
-static u64 find_existing_ddw(struct device_node *pdn, int *window_shift)
+static bool find_existing_ddw(struct device_node *pdn, u64 *dma_addr, int *window_shift)
{
struct direct_window *window;
const struct dynamic_dma_window_prop *direct64;
- u64 dma_addr = 0;
+ bool found = false;
spin_lock(&direct_window_list_lock);
/* check if we already created a window and dupe that config if so */
list_for_each_entry(window, &direct_window_list, list) {
if (window->device == pdn) {
direct64 = window->prop;
- dma_addr = be64_to_cpu(direct64->dma_base);
+ *dma_addr = be64_to_cpu(direct64->dma_base);
*window_shift = be32_to_cpu(direct64->window_shift);
+ found = true;
break;
}
}
spin_unlock(&direct_window_list_lock);
- return dma_addr;
+ return found;
}
static struct direct_window *ddw_list_new_entry(struct device_node *pdn,
@@ -1161,20 +1162,20 @@ static int iommu_get_page_shift(u32 query_page_size)
* pdn: the parent pe node with the ibm,dma_window property
* Future: also check if we can remap the base window for our base page size
*
- * returns the dma offset for use by the direct mapped DMA code.
+ * returns true if can map all pages (direct mapping), false otherwise..
*/
-static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
+static bool enable_ddw(struct pci_dev *dev, struct device_node *pdn)
{
int len = 0, ret;
int max_ram_len = order_base_2(ddw_memory_hotplug_max());
struct ddw_query_response query;
struct ddw_create_response create;
int page_shift;
- u64 dma_addr;
struct device_node *dn;
u32 ddw_avail[DDW_APPLICABLE_SIZE];
struct direct_window *window;
struct property *win64;
+ bool ddw_enabled = false;
struct dynamic_dma_window_prop *ddwprop;
struct failed_ddw_pdn *fpdn;
bool default_win_removed = false;
@@ -1186,9 +1187,10 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
mutex_lock(&direct_window_init_mutex);
- dma_addr = find_existing_ddw(pdn, &len);
- if (dma_addr != 0)
+ if (find_existing_ddw(pdn, &dev->dev.archdata.dma_offset, &len)) {
+ ddw_enabled = true;
goto out_unlock;
+ }
/*
* If we already went through this for a previous function of
@@ -1342,7 +1344,8 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
list_add(&window->list, &direct_window_list);
spin_unlock(&direct_window_list_lock);
- dma_addr = be64_to_cpu(ddwprop->dma_base);
+ dev->dev.archdata.dma_offset = be64_to_cpu(ddwprop->dma_base);
+ ddw_enabled = true;
goto out_unlock;
out_free_window:
@@ -1374,10 +1377,10 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
* as RAM, then we failed to create a window to cover persistent
* memory and need to set the DMA limit.
*/
- if (pmem_present && dma_addr && (len == max_ram_len))
- dev->dev.bus_dma_limit = dma_addr + (1ULL << len);
+ if (pmem_present && ddw_enabled && (len == max_ram_len))
+ dev->dev.bus_dma_limit = dev->dev.archdata.dma_offset + (1ULL << len);
- return dma_addr;
+ return ddw_enabled;
}
static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
@@ -1456,11 +1459,8 @@ static bool iommu_bypass_supported_pSeriesLP(struct pci_dev *pdev, u64 dma_mask)
break;
}
- if (pdn && PCI_DN(pdn)) {
- pdev->dev.archdata.dma_offset = enable_ddw(pdev, pdn);
- if (pdev->dev.archdata.dma_offset)
- return true;
- }
+ if (pdn && PCI_DN(pdn))
+ return enable_ddw(pdev, pdn);
return false;
}
--
2.32.0
next prev parent reply other threads:[~2021-08-17 6:40 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-17 6:39 [PATCH v6 00/11] DDW + Indirect Mapping Leonardo Bras
2021-08-17 6:39 ` [PATCH v6 01/11] powerpc/pseries/iommu: Replace hard-coded page shift Leonardo Bras
2021-08-17 6:39 ` [PATCH v6 02/11] powerpc/kernel/iommu: Add new iommu_table_in_use() helper Leonardo Bras
2021-08-27 16:52 ` Frederic Barrat
2021-08-17 6:39 ` [PATCH v6 03/11] powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper Leonardo Bras
2021-08-17 6:39 ` [PATCH v6 04/11] powerpc/pseries/iommu: Add ddw_list_new_entry() helper Leonardo Bras
2021-08-17 6:39 ` Leonardo Bras [this message]
2021-08-17 6:39 ` [PATCH v6 06/11] powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw() Leonardo Bras
2021-08-27 16:55 ` Frederic Barrat
2021-08-17 6:39 ` [PATCH v6 07/11] powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper Leonardo Bras
2021-08-17 6:39 ` [PATCH v6 08/11] powerpc/pseries/iommu: Update remove_dma_window() to accept property name Leonardo Bras
2021-08-27 16:58 ` Frederic Barrat
2021-08-17 6:39 ` [PATCH v6 09/11] powerpc/pseries/iommu: Find existing DDW with given " Leonardo Bras
2021-08-17 6:39 ` [PATCH v6 10/11] powerpc/pseries/iommu: Make use of DDW for indirect mapping Leonardo Bras
2021-08-27 17:06 ` Frederic Barrat
2021-08-27 17:53 ` Leonardo Brás
2021-08-17 6:39 ` [PATCH v6 11/11] powerpc/pseries/iommu: Rename "direct window" to "dma window" Leonardo Bras
2021-08-31 13:56 ` [PATCH v6 00/11] DDW + Indirect Mapping Michael Ellerman
[not found] ` <82ca56ab-6a0a-7cbb-a5e7-facc40f35c3c@linux.vnet.ibm.com>
2021-08-31 20:18 ` Leonardo Brás
2021-08-31 20:39 ` David Christensen
2021-08-31 20:49 ` Leonardo Brás
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210817063929.38701-6-leobras.c@gmail.com \
--to=leobras.c@gmail.com \
--cc=aik@ozlabs.ru \
--cc=benh@kernel.crashing.org \
--cc=david@gibson.dropbear.id.au \
--cc=fbarrat@linux.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lkp@intel.com \
--cc=mpe@ellerman.id.au \
--cc=nicoleotsuka@gmail.com \
--cc=paulus@samba.org \
--subject='Re: [PATCH v6 05/11] powerpc/pseries/iommu: Allow DDW windows starting at 0x00' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).