LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Zhihao Cheng <chengzhihao1@huawei.com>
To: <miquel.raynal@bootlin.com>, <richard@nod.at>, <vigneshr@ti.com>,
	<bbrezillon@kernel.org>
Cc: <linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
	<chengzhihao1@huawei.com>, <yukuai3@huawei.com>
Subject: [PATCH v2 1/2] mtd: mtdconcat: Judge callback existence based on the master
Date: Tue, 17 Aug 2021 19:48:56 +0800	[thread overview]
Message-ID: <20210817114857.2784825-2-chengzhihao1@huawei.com> (raw)
In-Reply-To: <20210817114857.2784825-1-chengzhihao1@huawei.com>

Since commit 46b5889cc2c5("mtd: implement proper partition handling")
applied, mtd partition device won't hold some callback functions, such
as _block_isbad, _block_markbad, etc. Besides, function mtd_block_isbad()
will get mtd device's master mtd device, then invokes master mtd device's
callback function. So, following process may result mtd_block_isbad()
always return 0, even though mtd device has bad blocks:

1. Split a mtd device into 3 partitions: PA, PB, PC
[ Each mtd partition device won't has callback function _block_isbad(). ]
2. Concatenate PA and PB as a new mtd device PN
[ mtd_concat_create() finds out each subdev has no callback function
_block_isbad(), so PN won't be assigned callback function
concat_block_isbad(). ]
Then, mtd_block_isbad() checks "!master->_block_isbad" is true, will
always return 0.

Reproducer:
// reproduce.c
static int __init init_diy_module(void)
{
	struct mtd_info *mtd[2];
	struct mtd_info *mtd_combine = NULL;

	mtd[0] = get_mtd_device_nm("NAND simulator partition 0");
	if (!mtd[0]) {
		pr_err("cannot find mtd1\n");
		return -EINVAL;
	}
	mtd[1] = get_mtd_device_nm("NAND simulator partition 1");
	if (!mtd[1]) {
		pr_err("cannot find mtd2\n");
		return -EINVAL;
	}

	put_mtd_device(mtd[0]);
	put_mtd_device(mtd[1]);

	mtd_combine = mtd_concat_create(mtd, 2, "Combine mtd");
	if (mtd_combine == NULL) {
		pr_err("combine failed\n");
		return -EINVAL;
	}

	mtd_device_register(mtd_combine, NULL, 0);
	pr_info("Combine success\n");

	return 0;
}

1. ID="0x20,0xac,0x00,0x15"
2. modprobe nandsim id_bytes=$ID parts=50,100 badblocks=100
3. insmod reproduce.ko
4. flash_erase /dev/mtd3 0 0
  libmtd: error!: MEMERASE64 ioctl failed for eraseblock 100 (mtd3)
  error 5 (Input/output error)
  // Should be "flash_erase: Skipping bad block at 00c80000"

Fixes: 46b5889cc2c54bac ("mtd: implement proper partition handling")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
---
 drivers/mtd/mtdconcat.c | 27 +++++++++++++++++++--------
 1 file changed, 19 insertions(+), 8 deletions(-)

diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index 6e4d0017c0bd..af51eee6b5e8 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -641,6 +641,7 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to c
 	int i;
 	size_t size;
 	struct mtd_concat *concat;
+	struct mtd_info *subdev_master = NULL;
 	uint32_t max_erasesize, curr_erasesize;
 	int num_erase_region;
 	int max_writebufsize = 0;
@@ -679,17 +680,19 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to c
 	concat->mtd.subpage_sft = subdev[0]->subpage_sft;
 	concat->mtd.oobsize = subdev[0]->oobsize;
 	concat->mtd.oobavail = subdev[0]->oobavail;
-	if (subdev[0]->_writev)
+
+	subdev_master = mtd_get_master(subdev[0]);
+	if (subdev_master->_writev)
 		concat->mtd._writev = concat_writev;
-	if (subdev[0]->_read_oob)
+	if (subdev_master->_read_oob)
 		concat->mtd._read_oob = concat_read_oob;
-	if (subdev[0]->_write_oob)
+	if (subdev_master->_write_oob)
 		concat->mtd._write_oob = concat_write_oob;
-	if (subdev[0]->_block_isbad)
+	if (subdev_master->_block_isbad)
 		concat->mtd._block_isbad = concat_block_isbad;
-	if (subdev[0]->_block_markbad)
+	if (subdev_master->_block_markbad)
 		concat->mtd._block_markbad = concat_block_markbad;
-	if (subdev[0]->_panic_write)
+	if (subdev_master->_panic_write)
 		concat->mtd._panic_write = concat_panic_write;
 
 	concat->mtd.ecc_stats.badblocks = subdev[0]->ecc_stats.badblocks;
@@ -721,14 +724,22 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to c
 				    subdev[i]->flags & MTD_WRITEABLE;
 		}
 
+		subdev_master = mtd_get_master(subdev[i]);
 		concat->mtd.size += subdev[i]->size;
 		concat->mtd.ecc_stats.badblocks +=
 			subdev[i]->ecc_stats.badblocks;
 		if (concat->mtd.writesize   !=  subdev[i]->writesize ||
 		    concat->mtd.subpage_sft != subdev[i]->subpage_sft ||
 		    concat->mtd.oobsize    !=  subdev[i]->oobsize ||
-		    !concat->mtd._read_oob  != !subdev[i]->_read_oob ||
-		    !concat->mtd._write_oob != !subdev[i]->_write_oob) {
+		    !concat->mtd._read_oob  != !subdev_master->_read_oob ||
+		    !concat->mtd._write_oob != !subdev_master->_write_oob) {
+			/*
+			 * Check against subdev[i] for data members, because
+			 * subdev's attributes may be different from master
+			 * mtd device. Check against subdev's master mtd
+			 * device for callbacks, because the existence of
+			 * subdev's callbacks is decided by master mtd device.
+			 */
 			kfree(concat);
 			printk("Incompatible OOB or ECC data on \"%s\"\n",
 			       subdev[i]->name);
-- 
2.31.1


  reply	other threads:[~2021-08-17 11:38 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-17 11:48 [PATCH v2 0/2] mtd: mtdconcat: Fix callback functions check Zhihao Cheng
2021-08-17 11:48 ` Zhihao Cheng [this message]
2021-08-17 16:49   ` [PATCH v2 1/2] mtd: mtdconcat: Judge callback existence based on the master Miquel Raynal
2021-08-17 11:48 ` [PATCH v2 2/2] mtd: mtdconcat: Check _read,_write callbacks existence before assignment Zhihao Cheng
2021-08-17 16:49   ` [PATCH v2 2/2] mtd: mtdconcat: Check _read, _write " Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210817114857.2784825-2-chengzhihao1@huawei.com \
    --to=chengzhihao1@huawei.com \
    --cc=bbrezillon@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    --cc=yukuai3@huawei.com \
    --subject='Re: [PATCH v2 1/2] mtd: mtdconcat: Judge callback existence based on the master' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).