LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Jonathan Cameron <jic23@kernel.org>,
	Lars-Peter Clausen <lars@metafoo.de>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	linux-iio@vger.kernel.org, <linux-kernel@vger.kernel.org>,
	Miquel Raynal <miquel.raynal@bootlin.com>
Subject: [PATCH 00/16] Bring software triggers support to MAX1027-like ADCs
Date: Wed, 18 Aug 2021 13:11:23 +0200	[thread overview]
Message-ID: <20210818111139.330636-1-miquel.raynal@bootlin.com> (raw)

Until now the max1027.c driver, which handles 10-bit devices (max10xx)
and 12-bit devices (max12xx), only supported hardware triggers. When a
hardware trigger is not wired it is very convenient to trigger periodic
conversions with timers or on userspace demand with a sysfs
trigger. Overall, when several values are needed at the same time using
triggers and buffers improves quite a lot the performances.

This series starts with two small fixes, then does a bit of
cleaning/code reorganization before actually adding support for software
triggers.

This series has been developed and tested on a custom board with a 4.14
kernel. I then rebased the series on top of a mainline kernel
(v5.14-rc1) but unfortunately after quite some time debugging it I was
unable to get all the necessary blocks running in order to properly test
it. Anyway, there was very little changes in that series when rebasing
it from v4.14 to v5.14-rc1 so I am pretty confident it will smoothly
work with a more recent kernel.

How to test sysfs triggers:
    echo 0 > /sys/bus/iio/devices/iio_sysfs_trigger/add_trigger
    cat /sys/bus/iio/devices/iio_sysfs_trigger/trigger0/name > \
        /sys/bus/iio/devices/iio:device0/trigger/current_trigger
    echo 1 > /sys/bus/iio/devices/iio:device0/scan_elements/in_voltageX_en
    echo 1 > /sys/bus/iio/devices/iio:device0/scan_elements/in_voltageY_en
    echo 1 > /sys/bus/iio/devices/iio:device0/buffer/enable
    cat /dev/iio\:device0 > /tmp/data &
    echo 1 > /sys/bus/iio/devices/trigger0/trigger_now
    od -t x1 /tmp/data

Cheers,
Miquèl

Miquel Raynal (16):
  iio: adc: max1027: Fix wrong shift with 12-bit devices
  iio: adc: max1027: Fix the number of max1X31 channels
  iio: adc: max1027: Push only the requested samples
  iio: adc: max1027: Lower conversion time
  iio: adc: max1027: Drop extra warning message
  iio: adc: max1027: Rename a helper
  iio: adc: max1027: Create a helper to configure the trigger
  iio: adc: max1027: Explain better how the trigger state gets changed
  iio: adc: max1027: Create a helper to configure the channels to scan
  iio: adc: max1027: Prevent single channel accesses during buffer reads
  iio: adc: max1027: Separate the IRQ handler from the read logic
  iio: adc: max1027: Introduce an end of conversion helper
  iio: adc: max1027: Prepare re-using the EOC interrupt
  iio: adc: max1027: Consolidate the end of conversion helper
  iio: adc: max1027: Support software triggers
  iio: adc: max1027: Enable software triggers to be used without IRQ

 drivers/iio/adc/max1027.c | 236 ++++++++++++++++++++++++++++----------
 1 file changed, 177 insertions(+), 59 deletions(-)

-- 
2.27.0


             reply	other threads:[~2021-08-18 11:11 UTC|newest]

Thread overview: 71+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-18 11:11 Miquel Raynal [this message]
2021-08-18 11:11 ` [PATCH 01/16] iio: adc: max1027: Fix wrong shift with 12-bit devices Miquel Raynal
2021-08-20  7:02   ` Sa, Nuno
2021-08-30  9:57     ` Jonathan Cameron
2021-08-18 11:11 ` [PATCH 02/16] iio: adc: max1027: Fix the number of max1X31 channels Miquel Raynal
2021-08-20  7:03   ` Sa, Nuno
2021-08-30 10:00     ` Jonathan Cameron
2021-08-18 11:11 ` [PATCH 03/16] iio: adc: max1027: Push only the requested samples Miquel Raynal
2021-08-20  7:10   ` Sa, Nuno
2021-08-30 10:07     ` Jonathan Cameron
2021-08-30 10:49       ` Sa, Nuno
2021-08-30 14:29         ` Jonathan Cameron
2021-08-30 15:02           ` Sa, Nuno
2021-09-01  8:12             ` Miquel Raynal
2021-09-04 14:06               ` Jonathan Cameron
2021-09-06  8:59               ` Sa, Nuno
2021-09-06 16:56                 ` Jonathan Cameron
2021-09-06 17:34                   ` Miquel Raynal
2021-08-30 10:06   ` Jonathan Cameron
2021-08-18 11:11 ` [PATCH 04/16] iio: adc: max1027: Lower conversion time Miquel Raynal
2021-08-20  7:12   ` Sa, Nuno
2021-08-30 10:10   ` Jonathan Cameron
2021-08-18 11:11 ` [PATCH 05/16] iio: adc: max1027: Drop extra warning message Miquel Raynal
2021-08-20  7:12   ` Sa, Nuno
2021-08-30 10:12   ` Jonathan Cameron
2021-08-18 11:11 ` [PATCH 06/16] iio: adc: max1027: Rename a helper Miquel Raynal
2021-08-20  7:13   ` Sa, Nuno
2021-08-18 11:11 ` [PATCH 07/16] iio: adc: max1027: Create a helper to configure the trigger Miquel Raynal
2021-08-20  7:16   ` Sa, Nuno
2021-08-30 10:16   ` Jonathan Cameron
2021-08-18 11:11 ` [PATCH 08/16] iio: adc: max1027: Explain better how the trigger state gets changed Miquel Raynal
2021-08-20  7:17   ` Sa, Nuno
2021-08-18 11:11 ` [PATCH 09/16] iio: adc: max1027: Create a helper to configure the channels to scan Miquel Raynal
2021-08-20  7:18   ` Sa, Nuno
2021-08-18 11:11 ` [PATCH 10/16] iio: adc: max1027: Prevent single channel accesses during buffer reads Miquel Raynal
2021-08-20  7:20   ` Sa, Nuno
2021-08-20  7:30     ` Sa, Nuno
2021-08-30 10:20       ` Jonathan Cameron
2021-09-02  8:56         ` Miquel Raynal
2021-08-18 11:11 ` [PATCH 11/16] iio: adc: max1027: Separate the IRQ handler from the read logic Miquel Raynal
2021-08-20  7:23   ` Sa, Nuno
2021-09-02  8:55     ` Miquel Raynal
2021-09-04 14:08       ` Jonathan Cameron
2021-08-18 11:11 ` [PATCH 12/16] iio: adc: max1027: Introduce an end of conversion helper Miquel Raynal
2021-08-20  7:28   ` Sa, Nuno
2021-09-02  9:26     ` Miquel Raynal
2021-08-30 10:34   ` Jonathan Cameron
2021-08-18 11:11 ` [PATCH 13/16] iio: adc: max1027: Prepare re-using the EOC interrupt Miquel Raynal
2021-08-20  7:31   ` Sa, Nuno
2021-08-30 10:30   ` Jonathan Cameron
2021-08-30 10:47   ` Jonathan Cameron
2021-08-18 11:11 ` [PATCH 14/16] iio: adc: max1027: Consolidate the end of conversion helper Miquel Raynal
2021-08-20  7:45   ` Sa, Nuno
2021-08-30 10:37   ` Jonathan Cameron
2021-08-30 12:44     ` Sa, Nuno
2021-08-30 14:32       ` Jonathan Cameron
2021-09-02 15:12       ` Miquel Raynal
2021-09-03 14:28         ` Sa, Nuno
2021-09-03 14:46           ` Miquel Raynal
2021-09-05  9:41             ` Jonathan Cameron
2021-09-06  9:12               ` Sa, Nuno
2021-09-06  9:30                 ` Sa, Nuno
2021-08-18 11:11 ` [PATCH 15/16] iio: adc: max1027: Support software triggers Miquel Raynal
2021-08-20  7:58   ` Sa, Nuno
2021-09-02 12:25     ` Miquel Raynal
2021-09-03 14:20       ` Sa, Nuno
2021-08-30 10:50   ` Jonathan Cameron
2021-09-02 15:21     ` Miquel Raynal
2021-09-05  9:43       ` Jonathan Cameron
2021-08-18 11:11 ` [PATCH 16/16] iio: adc: max1027: Enable software triggers to be used without IRQ Miquel Raynal
2021-08-30 10:54   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210818111139.330636-1-miquel.raynal@bootlin.com \
    --to=miquel.raynal@bootlin.com \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    --subject='Re: [PATCH 00/16] Bring software triggers support to MAX1027-like ADCs' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).