LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
To: <joel@jms.id.au>, <robh+dt@kernel.org>, <andrew@aj.id.au>,
	<linux-aspeed@lists.ozlabs.org>, <openbmc@lists.ozlabs.org>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Cc: <ryan_chen@aspeedtech.com>
Subject: [PATCH v2 1/5] dt-bindings: aspeed: Add eSPI controller
Date: Thu, 19 Aug 2021 16:00:36 +0800	[thread overview]
Message-ID: <20210819080040.31242-2-chiawei_wang@aspeedtech.com> (raw)
In-Reply-To: <20210819080040.31242-1-chiawei_wang@aspeedtech.com>

Add dt-bindings for Aspeed eSPI controller

Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
---
 .../devicetree/bindings/soc/aspeed/espi.yaml  | 158 ++++++++++++++++++
 1 file changed, 158 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/aspeed/espi.yaml

diff --git a/Documentation/devicetree/bindings/soc/aspeed/espi.yaml b/Documentation/devicetree/bindings/soc/aspeed/espi.yaml
new file mode 100644
index 000000000000..fec3d37f3ffd
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/aspeed/espi.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# # Copyright (c) 2021 Aspeed Technology Inc.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/aspeed/espi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Aspeed eSPI Controller
+
+maintainers:
+  - Chia-Wei Wang <chiawei_wang@aspeedtech.com>
+  - Ryan Chen <ryan_chen@aspeedtech.com>
+
+description:
+  Aspeed eSPI controller implements a slave side eSPI endpoint device
+  supporting the four eSPI channels, namely peripheral, virtual wire,
+  out-of-band, and flash.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - aspeed,ast2500-espi
+          - aspeed,ast2600-espi
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  espi-ctrl:
+    type: object
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - aspeed,ast2500-espi-ctrl
+              - aspeed,ast2600-espi-ctrl
+
+      interrupts:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      perif,memcyc-enable:
+        type: boolean
+        description: Enable memory cycle over eSPI peripheral channel
+
+      perif,memcyc-src-addr:
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        description: The Host side address to be decoded into the memory cycle over eSPI peripheral channel
+
+      perif,memcyc-size:
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        description: The size of the memory region allocated for the memory cycle over eSPI peripheral channel
+        minimum: 65536
+
+      perif,dma-mode:
+        type: boolean
+        description: Enable DMA support for eSPI peripheral channel
+
+      oob,dma-mode:
+        type: boolean
+        description: Enable DMA support for eSPI out-of-band channel
+
+      oob,dma-tx-desc-num:
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 2
+        maximum: 1023
+        description: The number of TX descriptors available for eSPI OOB DMA engine
+
+      oob,dma-rx-desc-num:
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 2
+        maximum: 1023
+        description: The number of RX descriptors available for eSPI OOB DMA engine
+
+      flash,dma-mode:
+        type: boolean
+        description: Enable DMA support for eSPI flash channel
+
+      flash,safs-mode:
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        enum: [ 0, 1, 2 ]
+        default: 0
+        description: Slave-Attached-Sharing-Flash mode, 0->Mix, 1->SW, 2->HW
+
+    dependencies:
+      perif,memcyc-src-addr: [ perif,memcyc-enable ]
+      perif,memcyc-size: [ perif,memcyc-enable ]
+      oob,dma-tx-desc-num: [ oob,dma-mode ]
+      oob,dma-rx-desc-num: [ oob,dma-mode ]
+
+    required:
+      - compatible
+      - interrupts
+      - clocks
+
+  espi-mmbi:
+    type: object
+
+    properties:
+      compatible:
+        const: aspeed, ast2600-espi-mmbi
+
+      interrupts:
+        maxItems: 1
+
+    required:
+      - compatible
+      - interrupts
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/ast2600-clock.h>
+
+    espi: espi@1e6ee000 {
+        compatible = "aspeed,ast2600-espi", "simple-mfd", "syscon";
+        reg = <0x1e6ee000 0x1000>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e6ee000 0x1000>;
+
+        espi_ctrl: espi-ctrl@0 {
+            compatible = "aspeed,ast2600-espi-ctrl";
+            reg = <0x0 0x800>;
+            interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&syscon ASPEED_CLK_GATE_ESPICLK>;
+            resets = <&syscon ASPEED_RESET_ESPI>;
+        };
+
+        espi_mmbi: espi-flash-channel@800 {
+            compatible = "aspeed,ast2600-espi-flash";
+            reg = <0x800 0x50>;
+            interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
-- 
2.17.1


  reply	other threads:[~2021-08-19  8:01 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-19  8:00 [PATCH v2 0/5] arm: aspeed: Add eSPI support Chia-Wei Wang
2021-08-19  8:00 ` Chia-Wei Wang [this message]
2021-08-19 12:49   ` [PATCH v2 1/5] dt-bindings: aspeed: Add eSPI controller Rob Herring
2021-08-20 20:01   ` Rob Herring
2021-08-23  1:21     ` ChiaWei Wang
2021-08-19  8:00 ` [PATCH v2 2/5] MAINTAINER: Add ASPEED eSPI driver entry Chia-Wei Wang
2021-08-19  8:00 ` [PATCH v2 3/5] clk: aspeed: Add eSPI reset bit Chia-Wei Wang
2021-08-19  8:00 ` [PATCH v2 4/5] soc: aspeed: Add eSPI driver Chia-Wei Wang
2021-08-19 17:27   ` kernel test robot
2021-08-19  8:00 ` [PATCH v2 5/5] ARM: dts: aspeed: Add eSPI node Chia-Wei Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210819080040.31242-2-chiawei_wang@aspeedtech.com \
    --to=chiawei_wang@aspeedtech.com \
    --cc=andrew@aj.id.au \
    --cc=devicetree@vger.kernel.org \
    --cc=joel@jms.id.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=openbmc@lists.ozlabs.org \
    --cc=robh+dt@kernel.org \
    --cc=ryan_chen@aspeedtech.com \
    --subject='Re: [PATCH v2 1/5] dt-bindings: aspeed: Add eSPI controller' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).