LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Peter Chen <peter.chen@kernel.org>
To: Jeaho Hwang <jhhwang@rtst.co.kr>
Cc: "Sebastian Andrzej Siewior" <bigeasy@linutronix.de>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Thomas Gleixner" <tglx@linutronix.de>,
	linux-rt-users@vger.kernel.org,
	"Linux team" <team-linux@rtst.co.kr>,
	"변무광(Byeon Moo Kwang)/자동화연)Automation Platform연구팀"
	<mkbyeon@lselectric.co.kr>,
	"최기홍(Choi Ki Hong)/자동화연)Automation Platform연구팀"
	<khchoib@lselectric.co.kr>
Subject: Re: [PATCH v2] usb: chipidea: local_irq_save/restore added for hw_ep_prime
Date: Sat, 21 Aug 2021 13:05:11 +0800	[thread overview]
Message-ID: <20210821050511.GA14810@Peter> (raw)
In-Reply-To: <CAJk_X9gyWch6Z1=hbe2vvqGu61mdavAU62+6dSka0tZoMzxu5Q@mail.gmail.com>

On 21-08-20 14:15:55, Jeaho Hwang wrote:
> 2021년 8월 19일 (목) 오후 5:48, Sebastian Andrzej Siewior
> <bigeasy@linutronix.de>님이 작성:
> >
> > On 2021-08-19 08:50:27 [+0900], Jeaho Hwang wrote:
> > > Without RT, udc_irq runs as a forced threaded irq handler, so it runs
> > > without any interruption or preemption. NO similar case is found on
> > > non-RT.
> >
> > I see only a devm_request_irq() so no force-threading here. Booting with
> > threadirqs would not lead to the problem since commit
> >    81e2073c175b8 ("genirq: Disable interrupts for force threaded handlers")
> >
> 
> I was wrong. udc threaded irq handler allows twd interrupt even on
> non-RT and with threaded irq.
> I believed Chen's comment "The function hw_ep_prime is only called at
> udc_irq which is registered as top-half irq handlers. Why the timer
> interrupt is occurred when hw_ep_prime is executing?".

Hi Jeaho,

How could you let udc irq as threaded irq? The chipidea interrupt
is registered using devm_request_irq.

> We have additional experiments and got the results like below. RNDIS
> host was Windows.
> 
> RT, 1ms delay between first ENDPTSETUPSTAT read and priming : error
> case occurred
> RT, 1ms delay + irq_save : no error case occurred.
> non-RT, threaded irq, 1ms delay : no error case occurred even twd
> fires inside the function execution.

Again, how do you observe it?

Peter

> 
> It doesn't seem to be a timing issue. But irq definitely affects
> priming on the RT kernel. Do you RT experts have any idea about the
> causes?
> If isr_tr_complete_handler fails ep priming it calls _ep_set_halt and
> goes an infinite loop in hw_ep_set_halt. It was an actual problem we
> experienced.
> So we protect irqs inside hw_ep_priming not to make error cases and
> also add a timeout inside the hw_ep_set_halt loop for a walkaround.
> The timeout patch is submitted to linux-usb.
> ( https://marc.info/?l=linux-usb&m=162918269024007&w=2 )
> 
> We withdrew this patch since we don't know if disabling irq is the
> best solution to solve the problem and udc would work fine with
> hw_ep_set_halt walkaround even though hw_ep_prime fails.
> But we are still trying to find out the cause of this symptom so We'd
> so appreciate it if RT or USB experts share some ideas or ways to
> report somewhere. Xilinx doesn't provide any support without their
> official kernel :(
> 
> Thanks for the discussion Sebastian.
> 
> Jeaho Hwang.
> 
> > …
> > > > If this function here is sensitive to timing (say the cpu_relax() loop
> > > > gets interrupt for 1ms) then it has to be documented as such.
> > >
> > > The controller sets ENDPTSETUPSTAT register if the host sent a setup packet.
> > > yes it is a timing problem. I will document that and resubmit again if
> > > you agree that local_irq_save could help from the timing problem.
> > >
> > > Thanks for the advice.
> >
> > If it is really a timing issue in the function as you describe below
> > then disabling interrupts would help and it is indeed an RT only issue.
> >
> > So you read OP_ENDPTSETUPSTAT, it is 0, all good.
> > You write OP_ENDPTPRIME, wait for it to be cleared.
> > Then you read OP_ENDPTSETUPSTAT again and if it is 0, all good.
> >
> > And the TWD interrupt could delay say the second read would read 1 and
> > it is invalidated. Which looks odd.
> > However, it is "okay" if the TWD interrupt happens after the second
> > read? Even if the host sends a setup packet, nothing breaks?
> > Do you have numbers on how long irq-off section is here? It seems to
> > depend on how long the HW needs to clear the OP_ENDPTPRIME bits.
> >
> > Sebastian
> 
> 
> 
> -- 
> 황재호, Jay Hwang, linux team manager of RTst
> 010-7242-1593

-- 

Thanks,
Peter Chen


  reply	other threads:[~2021-08-21  5:05 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-17  9:53 Jeaho Hwang
2021-08-18 16:17 ` Sebastian Andrzej Siewior
2021-08-18 23:50   ` Jeaho Hwang
2021-08-19  8:47     ` Sebastian Andrzej Siewior
2021-08-20  5:15       ` Jeaho Hwang
2021-08-21  5:05         ` Peter Chen [this message]
2021-08-21  7:04           ` Jeaho Hwang
2021-08-23 16:14             ` Sebastian Andrzej Siewior
2021-08-23 16:51         ` Sebastian Andrzej Siewior

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210821050511.GA14810@Peter \
    --to=peter.chen@kernel.org \
    --cc=bigeasy@linutronix.de \
    --cc=gregkh@linuxfoundation.org \
    --cc=jhhwang@rtst.co.kr \
    --cc=khchoib@lselectric.co.kr \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rt-users@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mkbyeon@lselectric.co.kr \
    --cc=team-linux@rtst.co.kr \
    --cc=tglx@linutronix.de \
    --subject='Re: [PATCH v2] usb: chipidea: local_irq_save/restore added for hw_ep_prime' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).