LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Billy Tsai <billy_tsai@aspeedtech.com>
To: <jic23@kernel.org>, <lars@metafoo.de>, <pmeerw@pmeerw.net>,
	<robh+dt@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>,
	<p.zabel@pengutronix.de>, <lgirdwood@gmail.com>,
	<broonie@kernel.org>, <linux-iio@vger.kernel.org>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>
Cc: <BMC-SW@aspeedtech.com>
Subject: [v4 05/15] iio: adc: aspeed: Refactory model data structure
Date: Mon, 23 Aug 2021 15:02:30 +0800	[thread overview]
Message-ID: <20210823070240.12600-6-billy_tsai@aspeedtech.com> (raw)
In-Reply-To: <20210823070240.12600-1-billy_tsai@aspeedtech.com>

This patch refactory the model data structure to distinguish the
function form differnet version of aspeed adc.
- Rename the vref_voltag to vref_fixed and add vref driver data
When driver probe will check vref_fixed value and store it
to vref which isn't const value.
- Add num_channels
Make num_channles of iio device can be changed by differnet model_data
- Add need_prescaler flag and scaler_bit_width
The need_prescaler flag used to tell the driver the clock divider needs
another prescaler and the scaler_bit_width to set the clock divider
bitfiled width.

Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
 drivers/iio/adc/aspeed_adc.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
index d85aa31ee3b1..f03c7921d534 100644
--- a/drivers/iio/adc/aspeed_adc.c
+++ b/drivers/iio/adc/aspeed_adc.c
@@ -63,8 +63,11 @@ struct aspeed_adc_model_data {
 	const char *model_name;
 	unsigned int min_sampling_rate;	// Hz
 	unsigned int max_sampling_rate;	// Hz
-	unsigned int vref_voltage;	// mV
+	unsigned int vref_fixed;	// mV
 	bool wait_init_sequence;
+	bool need_prescaler;
+	u8 scaler_bit_width;
+	unsigned int num_channels;
 };
 
 struct aspeed_adc_data {
@@ -75,6 +78,7 @@ struct aspeed_adc_data {
 	struct clk_hw		*clk_prescaler;
 	struct clk_hw		*clk_scaler;
 	struct reset_control	*rst;
+	int			vref;
 };
 
 #define ASPEED_CHAN(_idx, _data_reg_addr) {			\
@@ -118,7 +122,7 @@ static int aspeed_adc_read_raw(struct iio_dev *indio_dev,
 		return IIO_VAL_INT;
 
 	case IIO_CHAN_INFO_SCALE:
-		*val = data->model_data->vref_voltage;
+		*val = data->model_data->vref_fixed;
 		*val2 = ASPEED_RESOLUTION_BITS;
 		return IIO_VAL_FRACTIONAL_LOG2;
 
@@ -312,17 +316,23 @@ static int aspeed_adc_remove(struct platform_device *pdev)
 
 static const struct aspeed_adc_model_data ast2400_model_data = {
 	.model_name = "ast2400-adc",
-	.vref_voltage = 2500, // mV
+	.vref_fixed = 2500, // mV
 	.min_sampling_rate = 10000,
 	.max_sampling_rate = 500000,
+	.need_prescaler = true,
+	.scaler_bit_width = 10,
+	.num_channels = 16,
 };
 
 static const struct aspeed_adc_model_data ast2500_model_data = {
 	.model_name = "ast2500-adc",
-	.vref_voltage = 1800, // mV
+	.vref_fixed = 1800, // mV
 	.min_sampling_rate = 1,
 	.max_sampling_rate = 1000000,
 	.wait_init_sequence = true,
+	.need_prescaler = true,
+	.scaler_bit_width = 10,
+	.num_channels = 16,
 };
 
 static const struct of_device_id aspeed_adc_matches[] = {
-- 
2.25.1


  parent reply	other threads:[~2021-08-23  7:04 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-23  7:02 [v4 00/15] Add support for ast2600 ADC Billy Tsai
2021-08-23  7:02 ` [v4 01/15] dt-bindings: iio: adc: Add ast2600-adc bindings Billy Tsai
2021-08-24 12:13   ` Rob Herring
2021-08-25  0:06     ` Billy Tsai
2021-08-29 14:53       ` Jonathan Cameron
2021-08-23  7:02 ` [v4 02/15] iio: adc: aspeed: completes the bitfield declare Billy Tsai
2021-08-23  7:02 ` [v4 03/15] iio: adc: aspeed: set driver data when adc probe Billy Tsai
2021-08-23  7:02 ` [v4 04/15] iio: adc: aspeed: Keep model data to driver data Billy Tsai
2021-08-23  7:02 ` Billy Tsai [this message]
2021-08-23  7:02 ` [v4 06/15] iio: adc: aspeed: Add vref config function Billy Tsai
2021-08-23  7:02 ` [v4 07/15] iio: adc: aspeed: Set num_channels with model data Billy Tsai
2021-08-23  7:02 ` [v4 08/15] iio: adc: aspeed: Use model_data to set clk scaler Billy Tsai
2021-08-23  7:02 ` [v4 09/15] iio: adc: aspeed: Use devm_add_action_or_reset Billy Tsai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210823070240.12600-6-billy_tsai@aspeedtech.com \
    --to=billy_tsai@aspeedtech.com \
    --cc=BMC-SW@aspeedtech.com \
    --cc=andrew@aj.id.au \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=joel@jms.id.au \
    --cc=lars@metafoo.de \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=pmeerw@pmeerw.net \
    --cc=robh+dt@kernel.org \
    --subject='Re: [v4 05/15] iio: adc: aspeed: Refactory model data structure' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).