[PATCH v2 0/2] ARM: dts: keystone-k2*-evm: Fix mdio and dss node status

[PATCH v2 0/2] ARM: dts: keystone-k2*-evm: Fix mdio and dss node status

[Roger Quadros]

Hi Santosh,

This series fixes mdio and dss status nodes from "ok" to "okay"

As per Device Tree Specification [1], the status parameter of nodes can
be "okay", "disabled", etc. "ok" is not a valid parameter.

U-boot Driver Model does not recognize status="ok" either and treats
the node as disabled.

[1] https://github.com/devicetree-org/devicetree-specification/releases/tag/v0.3

cheers,
-roger

Roger Quadros (2):
  ARM: dts: keystone-k2*-evm: Fix mdio node status to "okay"
  ARM: dts: keystone-k2g-evm: Fix dss node status to "okay"

 arch/arm/boot/dts/keystone-k2e-evm.dts  | 2 +-
 arch/arm/boot/dts/keystone-k2g-evm.dts  | 2 +-
 arch/arm/boot/dts/keystone-k2hk-evm.dts | 2 +-
 arch/arm/boot/dts/keystone-k2l-evm.dts  | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

-- 
2.17.1

[PATCH v2 1/2] ARM: dts: keystone-k2*-evm: Fix mdio node status to "okay"

[Roger Quadros]

As per Device Tree Specification [1], the status parameter of nodes can
be "okay", "disabled", etc. "ok" is not a valid parameter.

U-boot Driver Model does not recognize status="ok" either and treats
the node as disabled.

[1] https://github.com/devicetree-org/devicetree-specification/releases/tag/v0.3

Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
---
 arch/arm/boot/dts/keystone-k2e-evm.dts  | 2 +-
 arch/arm/boot/dts/keystone-k2hk-evm.dts | 2 +-
 arch/arm/boot/dts/keystone-k2l-evm.dts  | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
index 66fec5f5d081..acac242ebdf7 100644
--- a/arch/arm/boot/dts/keystone-k2e-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
@@ -159,7 +159,7 @@
 };
 
 &mdio {
-	status = "ok";
+	status = "okay";
 	ethphy0: ethernet-phy@0 {
 		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
index ad4e22afe133..5e85f000acc3 100644
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -183,7 +183,7 @@
 };
 
 &mdio {
-	status = "ok";
+	status = "okay";
 	ethphy0: ethernet-phy@0 {
 		compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
index e200533d26a4..a6cbff4cfe20 100644
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
@@ -132,7 +132,7 @@
 };
 
 &mdio {
-	status = "ok";
+	status = "okay";
 	ethphy0: ethernet-phy@0 {
 		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
-- 
2.17.1

[PATCH v2 2/2] ARM: dts: keystone-k2g-evm: Fix dss node status to "okay"

[Roger Quadros]

As per Device Tree Specification [1], the status parameter of nodes can
be "okay", "disabled", etc. "ok" is not a valid parameter.

U-boot Driver Model does not recognize status="ok" either and treats
the node as disabled.

[1] https://github.com/devicetree-org/devicetree-specification/releases/tag/v0.3

Signed-off-by: Roger Quadros <rogerq@kernel.org>
---
 arch/arm/boot/dts/keystone-k2g-evm.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index d800f26b6275..57680323e202 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -534,7 +534,7 @@
 &dss {
 	pinctrl-names = "default";
 	pinctrl-0 = <&vout_pins>;
-	status = "ok";
+	status = "okay";
 
 	port {
 		dpi_out: endpoint {
-- 
2.17.1

Re: [PATCH v2 0/2] ARM: dts: keystone-k2*-evm: Fix mdio and dss node status

[Roger Quadros]

On 24/08/2021 13:58, Roger Quadros wrote:
> Hi Santosh,
> 
> This series fixes mdio and dss status nodes from "ok" to "okay"
> 
> As per Device Tree Specification [1], the status parameter of nodes can
> be "okay", "disabled", etc. "ok" is not a valid parameter.
> 
> U-boot Driver Model does not recognize status="ok" either and treats
> the node as disabled.
> 
> [1] https://github.com/devicetree-org/devicetree-specification/releases/tag/v0.3
> 
> cheers,
> -roger
> 
> Roger Quadros (2):
>   ARM: dts: keystone-k2*-evm: Fix mdio node status to "okay"
>   ARM: dts: keystone-k2g-evm: Fix dss node status to "okay"
> 
>  arch/arm/boot/dts/keystone-k2e-evm.dts  | 2 +-
>  arch/arm/boot/dts/keystone-k2g-evm.dts  | 2 +-
>  arch/arm/boot/dts/keystone-k2hk-evm.dts | 2 +-
>  arch/arm/boot/dts/keystone-k2l-evm.dts  | 2 +-
>  4 files changed, 4 insertions(+), 4 deletions(-)
> 

Changes in this version:
- updated commit message to point to DT spec instead of schema.

Re: [PATCH v2 0/2] ARM: dts: keystone-k2*-evm: Fix mdio and dss node status

[Nishanth Menon]

On 13:58-20210824, Roger Quadros wrote:
> Hi Santosh,
> 
> This series fixes mdio and dss status nodes from "ok" to "okay"
> 
> As per Device Tree Specification [1], the status parameter of nodes can
> be "okay", "disabled", etc. "ok" is not a valid parameter.
> 
> U-boot Driver Model does not recognize status="ok" either and treats
> the node as disabled.

^^ I suspect the above comment in the patches is to indicate side effect
of non-compliance.

> 
> [1] https://github.com/devicetree-org/devicetree-specification/releases/tag/v0.3
> 
> cheers,
> -roger
> 
> Roger Quadros (2):
>   ARM: dts: keystone-k2*-evm: Fix mdio node status to "okay"
>   ARM: dts: keystone-k2g-evm: Fix dss node status to "okay"


Reviewed-by: Nishanth Menon <nm@ti.com>

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D

Re: [PATCH v2 1/2] ARM: dts: keystone-k2*-evm: Fix mdio node status to "okay"

[Grygorii Strashko]

On 24/08/2021 13:58, Roger Quadros wrote:
> As per Device Tree Specification [1], the status parameter of nodes can
> be "okay", "disabled", etc. "ok" is not a valid parameter.
> 
> U-boot Driver Model does not recognize status="ok" either and treats
> the node as disabled.
> 
> [1] https://github.com/devicetree-org/devicetree-specification/releases/tag/v0.3
> 
> Cc: Grygorii Strashko <grygorii.strashko@ti.com>
> Signed-off-by: Roger Quadros <rogerq@kernel.org>
> ---
>   arch/arm/boot/dts/keystone-k2e-evm.dts  | 2 +-
>   arch/arm/boot/dts/keystone-k2hk-evm.dts | 2 +-
>   arch/arm/boot/dts/keystone-k2l-evm.dts  | 2 +-
>   3 files changed, 3 insertions(+), 3 deletions(-)

Thank you.
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>

-- 
Best regards,
grygorii

Re: [PATCH v2 0/2] ARM: dts: keystone-k2*-evm: Fix mdio and dss node status

[Roger Quadros]

Hi Santosh

On 24/08/2021 13:58, Roger Quadros wrote:
> Hi Santosh,
> 
> This series fixes mdio and dss status nodes from "ok" to "okay"
> 
> As per Device Tree Specification [1], the status parameter of nodes can
> be "okay", "disabled", etc. "ok" is not a valid parameter.
> 
> U-boot Driver Model does not recognize status="ok" either and treats
> the node as disabled.
> 
> [1] https://github.com/devicetree-org/devicetree-specification/releases/tag/v0.3

Could you please queue these trivial fixes for 5.15? Thanks

> 
> cheers,
> -roger
> 
> Roger Quadros (2):
>   ARM: dts: keystone-k2*-evm: Fix mdio node status to "okay"
>   ARM: dts: keystone-k2g-evm: Fix dss node status to "okay"
> 
>  arch/arm/boot/dts/keystone-k2e-evm.dts  | 2 +-
>  arch/arm/boot/dts/keystone-k2g-evm.dts  | 2 +-
>  arch/arm/boot/dts/keystone-k2hk-evm.dts | 2 +-
>  arch/arm/boot/dts/keystone-k2l-evm.dts  | 2 +-
>  4 files changed, 4 insertions(+), 4 deletions(-)
> 

cheers,
-roger

Re: [PATCH v2 0/2] ARM: dts: keystone-k2*-evm: Fix mdio and dss node status

[Roger Quadros]

Hi Santosh

On 25/08/2021 19:17, Nishanth Menon wrote:
> On 13:58-20210824, Roger Quadros wrote:
>> Hi Santosh,
>>
>> This series fixes mdio and dss status nodes from "ok" to "okay"
>>
>> As per Device Tree Specification [1], the status parameter of nodes can
>> be "okay", "disabled", etc. "ok" is not a valid parameter.
>>
>> U-boot Driver Model does not recognize status="ok" either and treats
>> the node as disabled.
> 
> ^^ I suspect the above comment in the patches is to indicate side effect
> of non-compliance.
> 
>>
>> [1] https://github.com/devicetree-org/devicetree-specification/releases/tag/v0.3
>>
>> cheers,
>> -roger
>>
>> Roger Quadros (2):
>>   ARM: dts: keystone-k2*-evm: Fix mdio node status to "okay"
>>   ARM: dts: keystone-k2g-evm: Fix dss node status to "okay"
> 
> 
> Reviewed-by: Nishanth Menon <nm@ti.com>
> 

Is there a chance to still pull these in for -next? Thanks.

cheers,
-roger