[PATCH 2/2] clk: imx: imx6ul: Fix csi clk gate register

[Stefan Riedmueller <s.riedmueller@phytec.de>]

According to the imx6ul Reference Manual the csi clk gate register is
CCM_CCGR3 (offset 0x74) bit 0/1. For the imx6ull on the other hand the
Reference Manual lists register CCM_CCGR2 (offset 0x70) bit 2/3 as the
csi clk gate which is the current setting.

Tests have shown though that the correct csi clk gate register for the
imx6ull is actually CCM_CCGR3 bit 0/1 as well. Thus set the correct
register for both platforms.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
 drivers/clk/imx/clk-imx6ul.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index 206e4c43f68f..5dd222fab01b 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -380,7 +380,6 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 		hws[IMX6ULL_CLK_ESAI_IPG]	= imx_clk_hw_gate2_shared("esai_ipg",	"ahb",		base + 0x70,	0, &share_count_esai);
 		hws[IMX6ULL_CLK_ESAI_MEM]	= imx_clk_hw_gate2_shared("esai_mem",	"ahb",		base + 0x70,	0, &share_count_esai);
 	}
-	hws[IMX6UL_CLK_CSI]		= imx_clk_hw_gate2("csi",		"csi_podf",		base + 0x70,	2);
 	hws[IMX6UL_CLK_I2C1]		= imx_clk_hw_gate2("i2c1",		"perclk",	base + 0x70,	6);
 	hws[IMX6UL_CLK_I2C2]		= imx_clk_hw_gate2("i2c2",		"perclk",	base + 0x70,	8);
 	hws[IMX6UL_CLK_I2C3]		= imx_clk_hw_gate2("i2c3",		"perclk",	base + 0x70,	10);
@@ -391,6 +390,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 	hws[IMX6UL_CLK_PXP]		= imx_clk_hw_gate2("pxp",		"axi",		base + 0x70,	30);
 
 	/* CCGR3 */
+	hws[IMX6UL_CLK_CSI]		= imx_clk_hw_gate2("csi",	"csi_podf",	base + 0x74,	0);
 	hws[IMX6UL_CLK_UART5_IPG]	= imx_clk_hw_gate2("uart5_ipg",	"ipg",		base + 0x74,	2);
 	hws[IMX6UL_CLK_UART5_SERIAL]	= imx_clk_hw_gate2("uart5_serial",	"uart_podf",	base + 0x74,	2);
 	if (clk_on_imx6ul()) {
-- 
2.25.1