LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Puranjay Mohan <puranjay12@gmail.com>
Cc: "Hennerich, Michael" <Michael.Hennerich@analog.com>,
	linux-iio <linux-iio@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	"Bogdan, Dragos" <Dragos.Bogdan@analog.com>,
	"Berghe, Darius" <Darius.Berghe@analog.com>,
	Andy Shevchenko <andy.shevchenko@gmail.com>
Subject: Re: [PATCH v2] iio: accel: adxl355: Add triggered buffer support
Date: Sun, 5 Sep 2021 10:45:48 +0100	[thread overview]
Message-ID: <20210905104548.3c6701ad@jic23-huawei> (raw)
In-Reply-To: <CANk7y0jVofBv0U6Ut9cX2=imafpMvXdYS2CjvZXcOJkAukH_VA@mail.gmail.com>

On Tue, 31 Aug 2021 22:39:19 +0530
Puranjay Mohan <puranjay12@gmail.com> wrote:

> On Mon, Aug 30, 2021 at 8:40 PM Jonathan Cameron <jic23@kernel.org> wrote:
> >
> > On Thu, 19 Aug 2021 23:41:33 +0530
> > Puranjay Mohan <puranjay12@gmail.com> wrote:
> >  
> > > Provide a way for continuous data capture by setting up buffer support. The
> > > data ready signal exposed at the DRDY pin of the ADXL355 is exploited as
> > > a hardware interrupt which triggers to fill the buffer.
> > >
> > > Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>  
> >
> > Hi Puranjay,
> >
> > A fresh read and I noticed a few additional things.
> > All simple stuff.
> >
> > I do have a slight concern that we might be setting ourselves up for problems
> > once the fifo is enabled.  Hopefully not, but if you have looked at that and
> > verified it will drop in nicely then that's great. We might be fine.  
> 
> Yes, I will work on FIFO and make sure I fix all issues if any arise.
> 
> >
> > Jonathan
> >
> >  
> > > ---
> > > Changes since v1:
> > > - Fix an indentation issue.
> > > - Add comments on layout of data in buffer.
> > > - Zero the buffer before using it in trigger handler.
> > > - Use if(ret) in place of if(ret < 0)
> > > ---
> > > drivers/iio/accel/Kconfig        |   4 +
> > >  drivers/iio/accel/adxl355_core.c | 162 ++++++++++++++++++++++++++++++-
> > >  2 files changed, 164 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> > > index d0c45c809..9c16c1841 100644
> > > --- a/drivers/iio/accel/Kconfig
> > > +++ b/drivers/iio/accel/Kconfig
> > > @@ -69,6 +69,8 @@ config ADXL355_I2C
> > >       depends on I2C
> > >       select ADXL355
> > >       select REGMAP_I2C
> > > +     select IIO_BUFFER
> > > +     select IIO_TRIGGERED_BUFFER
> > >       help
> > >         Say Y here if you want to build i2c support for the Analog Devices
> > >         ADXL355 3-axis digital accelerometer.
> > > @@ -82,6 +84,8 @@ config ADXL355_SPI
> > >       depends on SPI
> > >       select ADXL355
> > >       select REGMAP_SPI
> > > +     select IIO_BUFFER
> > > +     select IIO_TRIGGERED_BUFFER
> > >       help
> > >         Say Y here if you want to build spi support for the Analog Devices
> > >         ADXL355 3-axis digital accelerometer.
> > > diff --git a/drivers/iio/accel/adxl355_core.c b/drivers/iio/accel/adxl355_core.c
> > > index c91d2254c..d499403dc 100644
> > > --- a/drivers/iio/accel/adxl355_core.c
> > > +++ b/drivers/iio/accel/adxl355_core.c
> > > @@ -9,11 +9,16 @@
> > >
> > >  #include <linux/bits.h>
> > >  #include <linux/bitfield.h>
> > > +#include <linux/iio/buffer.h>
> > >  #include <linux/iio/iio.h>
> > > +#include <linux/iio/trigger.h>
> > > +#include <linux/iio/triggered_buffer.h>
> > > +#include <linux/iio/trigger_consumer.h>
> > >  #include <linux/limits.h>
> > >  #include <linux/math64.h>
> > >  #include <linux/module.h>
> > >  #include <linux/mod_devicetable.h>
> > > +#include <linux/of_irq.h>
> > >  #include <linux/regmap.h>
> > >  #include <asm/unaligned.h>
> > >
> > > @@ -46,6 +51,7 @@
> > >  #define ADXL355_RANGE_REG            0x2C
> > >  #define ADXL355_POWER_CTL_REG                0x2D
> > >  #define  ADXL355_POWER_CTL_MODE_MSK  GENMASK(1, 0)
> > > +#define  ADXL355_POWER_CTL_DRDY_MSK  BIT(2)
> > >  #define ADXL355_SELF_TEST_REG                0x2E
> > >  #define ADXL355_RESET_REG            0x2F
> > >
> > > @@ -165,7 +171,15 @@ struct adxl355_data {
> > >       enum adxl355_hpf_3db hpf_3db;
> > >       int calibbias[3];
> > >       int adxl355_hpf_3db_table[7][2];
> > > -     u8 transf_buf[3] ____cacheline_aligned;
> > > +     struct iio_trigger *dready_trig;
> > > +     int irq;
> > > +     union {
> > > +             u8 transf_buf[3];
> > > +             struct {
> > > +                     u8 buf[14];
> > > +                     s64 ts;
> > > +             } buffer;
> > > +     } ____cacheline_aligned;
> > >  };
> > >
> > >  static int adxl355_set_op_mode(struct adxl355_data *data,
> > > @@ -186,6 +200,23 @@ static int adxl355_set_op_mode(struct adxl355_data *data,
> > >       return ret;
> > >  }
> > >
> > > +static int adxl355_data_rdy_trigger_set_state(struct iio_trigger *trig,
> > > +                                           bool state)
> > > +{
> > > +     struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
> > > +     struct adxl355_data *data = iio_priv(indio_dev);
> > > +     int ret;
> > > +
> > > +     mutex_lock(&data->lock);  
> >
> > Why take the lock?  What are you protecting here?  
> 
> Power Control Register is the same register that is used to put the
> device in measurement mode, so it has to be protected.
> 

Regmap has an internal lock that will protect the register / cache etc
against concurrent changes - so we'd normally only expect to see
locking needed if one of the paths does an explicit read / modify /write
perhaps because it needs to base the write on what was read.

> >  
> > > +     ret = regmap_update_bits(data->regmap, ADXL355_POWER_CTL_REG,
> > > +                              ADXL355_POWER_CTL_DRDY_MSK,
> > > +                              FIELD_PREP(ADXL355_POWER_CTL_DRDY_MSK,
> > > +                                         !state));
> > > +     mutex_unlock(&data->lock);
> > > +
> > > +     return ret;
> > > +}
> > > +
> > >  static void adxl355_fill_3db_frequency_table(struct adxl355_data *data)
> > >  {
> > >       u32 multiplier;
> > > @@ -246,6 +277,12 @@ static int adxl355_setup(struct adxl355_data *data)
> > >       if (ret)
> > >               return ret;
> > >
> > > +     ret = regmap_update_bits(data->regmap, ADXL355_POWER_CTL_REG,
> > > +                              ADXL355_POWER_CTL_DRDY_MSK,
> > > +                              FIELD_PREP(ADXL355_POWER_CTL_DRDY_MSK, 1));
> > > +     if (ret)
> > > +             return ret;
> > > +
> > >       adxl355_fill_3db_frequency_table(data);
> > >
> > >       return adxl355_set_op_mode(data, ADXL355_MEASUREMENT);
> > > @@ -499,12 +536,74 @@ static int adxl355_read_avail(struct iio_dev *indio_dev,
> > >       }
> > >  }
> > >
> > > +static const unsigned long adxl355_avail_scan_masks[] = {
> > > +     GENMASK(3, 0),
> > > +     0
> > > +};
> > > +
> > >  static const struct iio_info adxl355_info = {
> > >       .read_raw       = adxl355_read_raw,
> > >       .write_raw      = adxl355_write_raw,
> > >       .read_avail     = &adxl355_read_avail,
> > >  };
> > >
> > > +static const struct iio_trigger_ops adxl355_trigger_ops = {
> > > +     .set_trigger_state = &adxl355_data_rdy_trigger_set_state,
> > > +     .validate_device = &iio_trigger_validate_own_device,  
> >
> > This is fine for now, but I'd like you to think about whether you can ultimately
> > drop this validation and allow other devices to be triggered from this signal.
> > It can be very helpful when doing sensor fusion to grab data at (approximately)
> > the same time from a set of different sensors.  
> 
> I will remove this line in the next patch, I will read about this more.
It's a little bit fiddly to do, so I meant this more as a long term target
rather than something to do in this particular patch!

> 
> >
> > IIRC this device has a fifo though which can complicate that option.
> >  
> > > +};
> > > +
> > > +static irqreturn_t adxl355_trigger_handler(int irq, void *p)
> > > +{
> > > +     struct iio_poll_func *pf = p;
> > > +     struct iio_dev *indio_dev = pf->indio_dev;
> > > +     struct adxl355_data *data = iio_priv(indio_dev);
> > > +     int ret;
> > > +
> > > +     mutex_lock(&data->lock);
> > > +
> > > +     /*
> > > +      * data->buffer is used both for triggered buffer support
> > > +      * and read/write_raw(), hence, it has to be zeroed here before usage.
> > > +      */
> > > +     data->buffer.buf[0] = 0;
> > > +
> > > +     /*
> > > +      * The accelaration data is 24 bits and big endian. It has to be saved  
> >
> > Spell check.  acceleration  
> 
> Will change in next version.
> 
> >  
> > > +      * in 32 bits, hence, it is saved in the 2nd byte of the 4 byte buffer.
> > > +      * The buf array is 14 bytes as it includes 3x4=12 bytes for
> > > +      * accelaration data of x, y, and z axis. It also includes 2 bytes for
> > > +      * temperature data.
> > > +      */
> > > +     ret = regmap_bulk_read(data->regmap, ADXL355_XDATA3_REG,
> > > +                            &data->buffer.buf[1], 3);
> > > +     if (ret)
> > > +             goto out_unlock_notify;
> > > +
> > > +     ret = regmap_bulk_read(data->regmap, ADXL355_YDATA3_REG,
> > > +                            &data->buffer.buf[5], 3);
> > > +     if (ret)
> > > +             goto out_unlock_notify;
> > > +
> > > +     ret = regmap_bulk_read(data->regmap, ADXL355_ZDATA3_REG,
> > > +                            &data->buffer.buf[9], 3);
> > > +     if (ret)
> > > +             goto out_unlock_notify;
> > > +
> > > +     ret = regmap_bulk_read(data->regmap, ADXL355_TEMP2_REG,
> > > +                            &data->buffer.buf[12], 2);
> > > +     if (ret)
> > > +             goto out_unlock_notify;
> > > +
> > > +     iio_push_to_buffers_with_timestamp(indio_dev, &data->buffer,
> > > +                                        pf->timestamp);
> > > +
> > > +out_unlock_notify:
> > > +     mutex_unlock(&data->lock);
> > > +     iio_trigger_notify_done(indio_dev->trig);
> > > +
> > > +     return IRQ_HANDLED;
> > > +}
> > > +
> > >  #define ADXL355_ACCEL_CHANNEL(index, reg, axis) {                    \
> > >       .type = IIO_ACCEL,                                              \
> > >       .address = reg,                                                 \
> > > @@ -518,6 +617,7 @@ static const struct iio_info adxl355_info = {
> > >       .info_mask_shared_by_type_available =                           \
> > >               BIT(IIO_CHAN_INFO_SAMP_FREQ) |                          \
> > >               BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY),      \
> > > +     .scan_index = index,                                            \
> > >       .scan_type = {                                                  \
> > >               .sign = 's',                                            \
> > >               .realbits = 20,                                         \
> > > @@ -537,6 +637,7 @@ static const struct iio_chan_spec adxl355_channels[] = {
> > >               .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> > >                                     BIT(IIO_CHAN_INFO_SCALE) |
> > >                                     BIT(IIO_CHAN_INFO_OFFSET),
> > > +             .scan_index = 3,
> > >               .scan_type = {
> > >                       .sign = 's',
> > >                       .realbits = 12,
> > > @@ -544,8 +645,46 @@ static const struct iio_chan_spec adxl355_channels[] = {
> > >                       .endianness = IIO_BE,
> > >               },
> > >       },
> > > +     IIO_CHAN_SOFT_TIMESTAMP(4),
> > >  };
> > >
> > > +static int adxl355_probe_trigger(struct iio_dev *indio_dev)
> > > +{
> > > +     struct adxl355_data *data = iio_priv(indio_dev);
> > > +     int ret;
> > > +
> > > +     if (!data->irq) {
> > > +             dev_info(data->dev, "no irq, using polling\n");  
> >
> > I would move this check externally so that we never probe if it's
> > not wired up.  It's also easy to tell (no trigger available) so
> > the dev_info is probably unnecessary noise in the log.  
> 
> I will remove this in next version.
> 
> >
> >  
> > > +             return 0;
> > > +     }
> > > +
> > > +     data->dready_trig = devm_iio_trigger_alloc(data->dev, "%s-dev%d",
> > > +                                                indio_dev->name,
> > > +                                                indio_dev->id);
> > > +     if (!data->dready_trig)
> > > +             return -ENOMEM;
> > > +
> > > +     data->dready_trig->ops = &adxl355_trigger_ops;
> > > +     iio_trigger_set_drvdata(data->dready_trig, indio_dev);
> > > +
> > > +     ret = devm_request_irq(data->dev, data->irq,
> > > +                            &iio_trigger_generic_data_rdy_poll,
> > > +                            IRQF_ONESHOT, "adxl355_irq", data->dready_trig);
> > > +     if (ret)
> > > +             return dev_err_probe(data->dev, ret, "request irq %d failed\n",
> > > +                                  data->irq);
> > > +
> > > +     ret = devm_iio_trigger_register(data->dev, data->dready_trig);
> > > +     if (ret) {
> > > +             dev_err(data->dev, "iio trigger register failed\n");
> > > +             return ret;
> > > +     }
> > > +
> > > +     indio_dev->trig = iio_trigger_get(data->dready_trig);
> > > +
> > > +     return 0;
> > > +}
> > > +
> > >  int adxl355_core_probe(struct device *dev, struct regmap *regmap,
> > >                      const char *name)
> > >  {
> > > @@ -563,18 +702,37 @@ int adxl355_core_probe(struct device *dev, struct regmap *regmap,
> > >       data->op_mode = ADXL355_STANDBY;
> > >       mutex_init(&data->lock);
> > >
> > > +     /*
> > > +      * TODO: Would be good to move it to the generic version.
> > > +      */
> > > +     ret = of_irq_get_byname(dev->of_node, "DRDY");
> > > +     if (ret > 0)
> > > +             data->irq = ret;  
> >
> > If you do this get down near the probe_trigger() call then you should be able to
> > avoid keeping a copy of irq in data.  Just pass it into that function as
> > a parameter.  
> 
> ok, I will change it in next version.
> 
> >  
> > > +
> > >       indio_dev->name = name;
> > >       indio_dev->info = &adxl355_info;
> > >       indio_dev->modes = INDIO_DIRECT_MODE;
> > >       indio_dev->channels = adxl355_channels;
> > >       indio_dev->num_channels = ARRAY_SIZE(adxl355_channels);
> > > +     indio_dev->available_scan_masks = adxl355_avail_scan_masks;
> > >
> > >       ret = adxl355_setup(data);
> > > -     if (ret < 0) {
> > > +     if (ret) {  
> >
> > This looks to be an unrelated cleanup.  Please move to a precursor patch as
> > it adds noise in this one which is fiddly enough without it ;)  
> 
> ok, I will make a separate patch for this and send a series.
> 
> >  
> > >               dev_err(dev, "ADXL355 setup failed\n");
> > >               return ret;
> > >       }
> > >
> > > +     ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
> > > +                                           &iio_pollfunc_store_time,
> > > +                                           &adxl355_trigger_handler, NULL);
> > > +     if (ret)
> > > +             return dev_err_probe(dev, ret,
> > > +                                  "iio triggered buffer setup failed\n");
> > > +
> > > +     ret = adxl355_probe_trigger(indio_dev);
> > > +     if (ret)
> > > +             return ret;
> > > +
> > >       return devm_iio_device_register(dev, indio_dev);
> > >  }
> > >  EXPORT_SYMBOL_GPL(adxl355_core_probe);  
> >  
> 
> 


      reply	other threads:[~2021-09-05  9:42 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-19 18:11 Puranjay Mohan
2021-08-30 15:14 ` Jonathan Cameron
2021-08-31 17:09   ` Puranjay Mohan
2021-09-05  9:45     ` Jonathan Cameron [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210905104548.3c6701ad@jic23-huawei \
    --to=jic23@kernel.org \
    --cc=Darius.Berghe@analog.com \
    --cc=Dragos.Bogdan@analog.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=puranjay12@gmail.com \
    --subject='Re: [PATCH v2] iio: accel: adxl355: Add triggered buffer support' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).