[PATCH v9 0/4] Add support for the Hynix Hi-846 camera

[Martin Kepplinger <martin.kepplinger@puri.sm>]

hi,

This series adds support for the SK Hynix Hi-846 CMOS images sensor.
It includes the dt-bindings and the driver.

best wishes,

                              martin

revision history
----------------
v9: (thank you Pavel and Sakari)
* fix the probe() error paths (that I broke in v8)
* cheanups

v8: (thank you Laurent)
* add fwnode properties support for orientation and rotation on the board
* remove the arm64 defconfig addition patch. deal with that later.
* https://lore.kernel.org/linux-media/20210831134344.1673318-1-martin.kepplinger@puri.sm/

v7: (thank you Sakari)
* move the check for supported nr_lanes for a mode to set_format()
* change get_selection() according to the Sakaris' review
* check for the mipi link frequencies from DT
* check for the external clock rate and add assigned-clock-rates requirement
* https://lore.kernel.org/linux-media/20210712084137.3779628-1-martin.kepplinger@puri.sm/

v6:
* better digital gain defaults
* lane config fix found by smatch
* fix regulator usage in power_on()
* https://lore.kernel.org/linux-media/20210628101054.828579-1-martin.kepplinger@puri.sm/

v5: (thank you Laurent and Rob)
* minor dt-bindings fixes
* driver: disable lens shading correcting (no seed values yet used from "otp" for that)
* add reviewed-tags
* https://lore.kernel.org/linux-media/20210611101404.2553818-1-martin.kepplinger@puri.sm/

v4: (thank you Laurent, Sakari and Rob) many driver changes, see v3 review for
details. they include:
* add get_selection(), remove open() callback
* use gpiod API
* use regulator_bulk API
* fix power supply timing sequence and bindings
* https://lore.kernel.org/linux-media/20210607105213.1211722-1-martin.kepplinger@puri.sm/

v3: (thank you, Laurent)
* use do_div() for divisions
* reset-gpios DT property name instead of rst-gpios
* improve the dt-bindings
* add the phone-devel list
* https://lore.kernel.org/linux-media/20210531120737.168496-1-martin.kepplinger@puri.sm/

v2:
sent a bit early due to stupid mistakes
* fix build issues
* fix dtschema issues
* add enable for arm64 defconfig
* https://lore.kernel.org/linux-media/20210530212337.GA15366@duo.ucw.cz/T/#t

v1:
* https://lore.kernel.org/linux-media/20210527091221.3335998-1-martin.kepplinger@puri.sm/


Martin Kepplinger (4):
  dt-bindings: vendor-prefixes: Add SK Hynix Inc.
  dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel
    sensor
  media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera
  Documentation: i2c-cardlist: add the Hynix hi846 sensor

 .../admin-guide/media/i2c-cardlist.rst        |    1 +
 .../bindings/media/i2c/hynix,hi846.yaml       |  120 +
 .../devicetree/bindings/vendor-prefixes.yaml  |    2 +
 MAINTAINERS                                   |    6 +
 drivers/media/i2c/Kconfig                     |   13 +
 drivers/media/i2c/Makefile                    |    1 +
 drivers/media/i2c/hi846.c                     | 2190 +++++++++++++++++
 7 files changed, 2333 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
 create mode 100644 drivers/media/i2c/hi846.c

-- 
2.30.2