LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Yu Kuai <yukuai3@huawei.com>
To: <axboe@kernel.dk>, <josef@toxicpanda.com>, <ming.lei@redhat.com>
Cc: <linux-block@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<nbd@other.debian.org>, <yukuai3@huawei.com>,
<yi.zhang@huawei.com>
Subject: [PATCH v4 3/6] nbd: don't handle response without a corresponding request message
Date: Tue, 7 Sep 2021 22:01:51 +0800 [thread overview]
Message-ID: <20210907140154.2134091-4-yukuai3@huawei.com> (raw)
In-Reply-To: <20210907140154.2134091-1-yukuai3@huawei.com>
While handling a response message from server, nbd_read_stat() will
try to get request by tag, and then complete the request. However,
this is problematic if nbd haven't sent a corresponding request
message:
t1 t2
submit_bio
nbd_queue_rq
blk_mq_start_request
recv_work
nbd_read_stat
blk_mq_find_and_get_req
blk_mq_complete_request
nbd_send_cmd
Thus add a new cmd flag 'NBD_CMD_INFLIGHT', it will be set in
nbd_send_cmd() and checked in nbd_read_stat().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
---
drivers/block/nbd.c | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 920da390635c..521a8d913741 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -126,6 +126,12 @@ struct nbd_device {
};
#define NBD_CMD_REQUEUED 1
+/*
+ * This flag will be set if nbd_queue_rq() succeed, and will be checked and
+ * cleared in completion. Both setting and clearing of the flag are protected
+ * by cmd->lock.
+ */
+#define NBD_CMD_INFLIGHT 2
struct nbd_cmd {
struct nbd_device *nbd;
@@ -400,6 +406,7 @@ static enum blk_eh_timer_return nbd_xmit_timeout(struct request *req,
if (!mutex_trylock(&cmd->lock))
return BLK_EH_RESET_TIMER;
+ __clear_bit(NBD_CMD_INFLIGHT, &cmd->flags);
if (!refcount_inc_not_zero(&nbd->config_refs)) {
cmd->status = BLK_STS_TIMEOUT;
mutex_unlock(&cmd->lock);
@@ -730,6 +737,12 @@ static struct nbd_cmd *nbd_read_stat(struct nbd_device *nbd, int index)
cmd = blk_mq_rq_to_pdu(req);
mutex_lock(&cmd->lock);
+ if (!__test_and_clear_bit(NBD_CMD_INFLIGHT, &cmd->flags)) {
+ dev_err(disk_to_dev(nbd->disk), "Suspicious reply %d (status %u flags %lu)",
+ tag, cmd->status, cmd->flags);
+ ret = -ENOENT;
+ goto out;
+ }
if (cmd->cmd_cookie != nbd_handle_to_cookie(handle)) {
dev_err(disk_to_dev(nbd->disk), "Double reply on req %p, cmd_cookie %u, handle cookie %u\n",
req, cmd->cmd_cookie, nbd_handle_to_cookie(handle));
@@ -833,6 +846,7 @@ static bool nbd_clear_req(struct request *req, void *data, bool reserved)
mutex_lock(&cmd->lock);
cmd->status = BLK_STS_IOERR;
+ __clear_bit(NBD_CMD_INFLIGHT, &cmd->flags);
mutex_unlock(&cmd->lock);
blk_mq_complete_request(req);
@@ -968,7 +982,13 @@ static int nbd_handle_cmd(struct nbd_cmd *cmd, int index)
* returns EAGAIN can be retried on a different socket.
*/
ret = nbd_send_cmd(nbd, cmd, index);
- if (ret == -EAGAIN) {
+ /*
+ * Access to this flag is protected by cmd->lock, thus it's safe to set
+ * the flag after nbd_send_cmd() succeed to send request to server.
+ */
+ if (!ret)
+ __set_bit(NBD_CMD_INFLIGHT, &cmd->flags);
+ else if (ret == -EAGAIN) {
dev_err_ratelimited(disk_to_dev(nbd->disk),
"Request send failed, requeueing\n");
nbd_mark_nsock_dead(nbd, nsock, 1);
--
2.31.1
next prev parent reply other threads:[~2021-09-07 13:52 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-07 14:01 [PATCH v4 0/6] handle unexpected message from server Yu Kuai
2021-09-07 14:01 ` [PATCH v4 1/6] blk-mq: export two symbols to get request by tag Yu Kuai
2021-09-07 14:01 ` [PATCH v4 2/6] nbd: convert to use blk_mq_find_and_get_req() Yu Kuai
2021-09-08 7:30 ` Ming Lei
2021-09-08 7:37 ` yukuai (C)
2021-09-08 8:00 ` Ming Lei
2021-09-08 8:29 ` yukuai (C)
2021-09-08 9:27 ` Ming Lei
2021-09-08 11:03 ` yukuai (C)
2021-09-07 14:01 ` Yu Kuai [this message]
2021-09-07 14:01 ` [PATCH v4 4/6] nbd: make sure request completion won't concurrent Yu Kuai
2021-09-07 14:01 ` [PATCH v4 5/6] nbd: check sock index in nbd_read_stat() Yu Kuai
2021-09-07 14:01 ` [PATCH v4 6/6] nbd: don't start request if nbd_queue_rq() failed Yu Kuai
2021-09-09 6:41 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210907140154.2134091-4-yukuai3@huawei.com \
--to=yukuai3@huawei.com \
--cc=axboe@kernel.dk \
--cc=josef@toxicpanda.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ming.lei@redhat.com \
--cc=nbd@other.debian.org \
--cc=yi.zhang@huawei.com \
--subject='Re: [PATCH v4 3/6] nbd: don'\''t handle response without a corresponding request message' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).