LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>,
	Mathieu Poirier <mathieu.poirier@linaro.org>,
	Anibal Limon <anibal.limon@linaro.org>,
	Loic Poulain <loic.poulain@linaro.org>,
	Sasha Levin <sashal@kernel.org>,
	linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org
Subject: [PATCH AUTOSEL 5.13 02/29] remoteproc: qcom: wcnss: Fix race with iris probe
Date: Sat, 11 Sep 2021 09:12:06 -0400	[thread overview]
Message-ID: <20210911131233.284800-2-sashal@kernel.org> (raw)
In-Reply-To: <20210911131233.284800-1-sashal@kernel.org>

From: Bjorn Andersson <bjorn.andersson@linaro.org>

[ Upstream commit 1fcef985c8bdd542c43da0d87bd9d51980c3859b ]

The remoteproc driver is split between the responsibilities of getting
the SoC-internal ARM core up and running and the external RF (aka
"Iris") part configured.

In order to satisfy the regulator framework's need of a struct device *
to look up supplies this was implemented as two different drivers, using
of_platform_populate() in the remoteproc part to probe the iris part.

Unfortunately it's possible that the iris part probe defers on yet not
available regulators and an attempt to start the remoteproc will have to
be rejected, until this has been resolved. But there's no useful
mechanism of knowing when this would be.

Instead replace the of_platform_populate() and the iris probe with a
function that rolls its own struct device, with the relevant of_node
associated that is enough to acquire regulators and clocks specified in
the DT node and that may propagate the EPROBE_DEFER back to the wcnss
device's probe.

Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reported-by: Anibal Limon <anibal.limon@linaro.org>
Reported-by: Loic Poulain <loic.poulain@linaro.org>
Tested-by: Anibal Limon <anibal.limon@linaro.org>
Link: https://lore.kernel.org/r/20210312002251.3273013-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/remoteproc/qcom_wcnss.c      |  49 +++--------
 drivers/remoteproc/qcom_wcnss.h      |   4 +-
 drivers/remoteproc/qcom_wcnss_iris.c | 120 +++++++++++++++++----------
 3 files changed, 89 insertions(+), 84 deletions(-)

diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index 5f3455aa7e0e..387b90cc18d2 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -142,18 +142,6 @@ static const struct wcnss_data pronto_v2_data = {
 	.num_vregs = 1,
 };
 
-void qcom_wcnss_assign_iris(struct qcom_wcnss *wcnss,
-			    struct qcom_iris *iris,
-			    bool use_48mhz_xo)
-{
-	mutex_lock(&wcnss->iris_lock);
-
-	wcnss->iris = iris;
-	wcnss->use_48mhz_xo = use_48mhz_xo;
-
-	mutex_unlock(&wcnss->iris_lock);
-}
-
 static int wcnss_load(struct rproc *rproc, const struct firmware *fw)
 {
 	struct qcom_wcnss *wcnss = (struct qcom_wcnss *)rproc->priv;
@@ -639,12 +627,20 @@ static int wcnss_probe(struct platform_device *pdev)
 		goto detach_pds;
 	}
 
+	wcnss->iris = qcom_iris_probe(&pdev->dev, &wcnss->use_48mhz_xo);
+	if (IS_ERR(wcnss->iris)) {
+		ret = PTR_ERR(wcnss->iris);
+		goto detach_pds;
+	}
+
 	ret = rproc_add(rproc);
 	if (ret)
-		goto detach_pds;
+		goto remove_iris;
 
-	return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+	return 0;
 
+remove_iris:
+	qcom_iris_remove(wcnss->iris);
 detach_pds:
 	wcnss_release_pds(wcnss);
 free_rproc:
@@ -657,7 +653,7 @@ static int wcnss_remove(struct platform_device *pdev)
 {
 	struct qcom_wcnss *wcnss = platform_get_drvdata(pdev);
 
-	of_platform_depopulate(&pdev->dev);
+	qcom_iris_remove(wcnss->iris);
 
 	qcom_smem_state_put(wcnss->state);
 	rproc_del(wcnss->rproc);
@@ -687,28 +683,7 @@ static struct platform_driver wcnss_driver = {
 	},
 };
 
-static int __init wcnss_init(void)
-{
-	int ret;
-
-	ret = platform_driver_register(&wcnss_driver);
-	if (ret)
-		return ret;
-
-	ret = platform_driver_register(&qcom_iris_driver);
-	if (ret)
-		platform_driver_unregister(&wcnss_driver);
-
-	return ret;
-}
-module_init(wcnss_init);
-
-static void __exit wcnss_exit(void)
-{
-	platform_driver_unregister(&qcom_iris_driver);
-	platform_driver_unregister(&wcnss_driver);
-}
-module_exit(wcnss_exit);
+module_platform_driver(wcnss_driver);
 
 MODULE_DESCRIPTION("Qualcomm Peripheral Image Loader for Wireless Subsystem");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/remoteproc/qcom_wcnss.h b/drivers/remoteproc/qcom_wcnss.h
index 62c8682d0a92..6d01ee6afa7f 100644
--- a/drivers/remoteproc/qcom_wcnss.h
+++ b/drivers/remoteproc/qcom_wcnss.h
@@ -17,9 +17,9 @@ struct wcnss_vreg_info {
 	bool super_turbo;
 };
 
+struct qcom_iris *qcom_iris_probe(struct device *parent, bool *use_48mhz_xo);
+void qcom_iris_remove(struct qcom_iris *iris);
 int qcom_iris_enable(struct qcom_iris *iris);
 void qcom_iris_disable(struct qcom_iris *iris);
 
-void qcom_wcnss_assign_iris(struct qcom_wcnss *wcnss, struct qcom_iris *iris, bool use_48mhz_xo);
-
 #endif
diff --git a/drivers/remoteproc/qcom_wcnss_iris.c b/drivers/remoteproc/qcom_wcnss_iris.c
index 169acd305ae3..09720ddddc85 100644
--- a/drivers/remoteproc/qcom_wcnss_iris.c
+++ b/drivers/remoteproc/qcom_wcnss_iris.c
@@ -17,7 +17,7 @@
 #include "qcom_wcnss.h"
 
 struct qcom_iris {
-	struct device *dev;
+	struct device dev;
 
 	struct clk *xo_clk;
 
@@ -75,7 +75,7 @@ int qcom_iris_enable(struct qcom_iris *iris)
 
 	ret = clk_prepare_enable(iris->xo_clk);
 	if (ret) {
-		dev_err(iris->dev, "failed to enable xo clk\n");
+		dev_err(&iris->dev, "failed to enable xo clk\n");
 		goto disable_regulators;
 	}
 
@@ -93,43 +93,90 @@ void qcom_iris_disable(struct qcom_iris *iris)
 	regulator_bulk_disable(iris->num_vregs, iris->vregs);
 }
 
-static int qcom_iris_probe(struct platform_device *pdev)
+static const struct of_device_id iris_of_match[] = {
+	{ .compatible = "qcom,wcn3620", .data = &wcn3620_data },
+	{ .compatible = "qcom,wcn3660", .data = &wcn3660_data },
+	{ .compatible = "qcom,wcn3660b", .data = &wcn3680_data },
+	{ .compatible = "qcom,wcn3680", .data = &wcn3680_data },
+	{}
+};
+
+static void qcom_iris_release(struct device *dev)
+{
+	struct qcom_iris *iris = container_of(dev, struct qcom_iris, dev);
+
+	of_node_put(iris->dev.of_node);
+	kfree(iris);
+}
+
+struct qcom_iris *qcom_iris_probe(struct device *parent, bool *use_48mhz_xo)
 {
+	const struct of_device_id *match;
 	const struct iris_data *data;
-	struct qcom_wcnss *wcnss;
+	struct device_node *of_node;
 	struct qcom_iris *iris;
 	int ret;
 	int i;
 
-	iris = devm_kzalloc(&pdev->dev, sizeof(struct qcom_iris), GFP_KERNEL);
-	if (!iris)
-		return -ENOMEM;
+	of_node = of_get_child_by_name(parent->of_node, "iris");
+	if (!of_node) {
+		dev_err(parent, "No child node \"iris\" found\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	iris = kzalloc(sizeof(*iris), GFP_KERNEL);
+	if (!iris) {
+		of_node_put(of_node);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	device_initialize(&iris->dev);
+	iris->dev.parent = parent;
+	iris->dev.release = qcom_iris_release;
+	iris->dev.of_node = of_node;
+
+	dev_set_name(&iris->dev, "%s.iris", dev_name(parent));
+
+	ret = device_add(&iris->dev);
+	if (ret) {
+		put_device(&iris->dev);
+		return ERR_PTR(ret);
+	}
+
+	match = of_match_device(iris_of_match, &iris->dev);
+	if (!match) {
+		dev_err(&iris->dev, "no matching compatible for iris\n");
+		ret = -EINVAL;
+		goto err_device_del;
+	}
 
-	data = of_device_get_match_data(&pdev->dev);
-	wcnss = dev_get_drvdata(pdev->dev.parent);
+	data = match->data;
 
-	iris->xo_clk = devm_clk_get(&pdev->dev, "xo");
+	iris->xo_clk = devm_clk_get(&iris->dev, "xo");
 	if (IS_ERR(iris->xo_clk)) {
-		if (PTR_ERR(iris->xo_clk) != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "failed to acquire xo clk\n");
-		return PTR_ERR(iris->xo_clk);
+		ret = PTR_ERR(iris->xo_clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&iris->dev, "failed to acquire xo clk\n");
+		goto err_device_del;
 	}
 
 	iris->num_vregs = data->num_vregs;
-	iris->vregs = devm_kcalloc(&pdev->dev,
+	iris->vregs = devm_kcalloc(&iris->dev,
 				   iris->num_vregs,
 				   sizeof(struct regulator_bulk_data),
 				   GFP_KERNEL);
-	if (!iris->vregs)
-		return -ENOMEM;
+	if (!iris->vregs) {
+		ret = -ENOMEM;
+		goto err_device_del;
+	}
 
 	for (i = 0; i < iris->num_vregs; i++)
 		iris->vregs[i].supply = data->vregs[i].name;
 
-	ret = devm_regulator_bulk_get(&pdev->dev, iris->num_vregs, iris->vregs);
+	ret = devm_regulator_bulk_get(&iris->dev, iris->num_vregs, iris->vregs);
 	if (ret) {
-		dev_err(&pdev->dev, "failed to get regulators\n");
-		return ret;
+		dev_err(&iris->dev, "failed to get regulators\n");
+		goto err_device_del;
 	}
 
 	for (i = 0; i < iris->num_vregs; i++) {
@@ -143,34 +190,17 @@ static int qcom_iris_probe(struct platform_device *pdev)
 					   data->vregs[i].load_uA);
 	}
 
-	qcom_wcnss_assign_iris(wcnss, iris, data->use_48mhz_xo);
-
-	return 0;
-}
+	*use_48mhz_xo = data->use_48mhz_xo;
 
-static int qcom_iris_remove(struct platform_device *pdev)
-{
-	struct qcom_wcnss *wcnss = dev_get_drvdata(pdev->dev.parent);
+	return iris;
 
-	qcom_wcnss_assign_iris(wcnss, NULL, false);
+err_device_del:
+	device_del(&iris->dev);
 
-	return 0;
+	return ERR_PTR(ret);
 }
 
-static const struct of_device_id iris_of_match[] = {
-	{ .compatible = "qcom,wcn3620", .data = &wcn3620_data },
-	{ .compatible = "qcom,wcn3660", .data = &wcn3660_data },
-	{ .compatible = "qcom,wcn3660b", .data = &wcn3680_data },
-	{ .compatible = "qcom,wcn3680", .data = &wcn3680_data },
-	{}
-};
-MODULE_DEVICE_TABLE(of, iris_of_match);
-
-struct platform_driver qcom_iris_driver = {
-	.probe = qcom_iris_probe,
-	.remove = qcom_iris_remove,
-	.driver = {
-		.name = "qcom-iris",
-		.of_match_table = iris_of_match,
-	},
-};
+void qcom_iris_remove(struct qcom_iris *iris)
+{
+	device_del(&iris->dev);
+}
-- 
2.30.2


  reply	other threads:[~2021-09-11 13:14 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-11 13:12 [PATCH AUTOSEL 5.13 01/29] dt-bindings: mtd: gpmc: Fix the ECC bytes vs. OOB bytes equation Sasha Levin
2021-09-11 13:12 ` Sasha Levin [this message]
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 03/29] mfd: db8500-prcmu: Adjust map to reality Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 04/29] PCI: Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 05/29] fuse: fix use after free in fuse_read_interrupt() Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 06/29] PCI: tegra194: Fix handling BME_CHGED event Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 07/29] PCI: tegra194: Fix MSI-X programming Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 08/29] PCI: tegra: Fix OF node reference leak Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 09/29] mfd: Don't use irq_create_mapping() to resolve a mapping Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 10/29] PCI: rcar: Fix runtime PM imbalance in rcar_pcie_ep_probe() Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 11/29] PCI: rcar: Add L1 link state fix into data abort hook Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 12/29] KVM: arm64: Make hyp_panic() more robust when protected mode is enabled Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 13/29] tracing/probes: Reject events which have the same name of existing one Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 14/29] PCI: cadence: Use bitfield for *quirk_retrain_flag* instead of bool Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 15/29] PCI: cadence: Add quirk flag to set minimum delay in LTSSM Detect.Quiet state Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 16/29] PCI: j721e: Add PCIe support for J7200 Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 17/29] PCI: j721e: Add PCIe support for AM64 Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 18/29] PCI: Add ACS quirks for Cavium multi-function devices Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 19/29] watchdog: Start watchdog in watchdog_set_last_hw_keepalive only if appropriate Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 20/29] octeontx2-af: Add additional register check to rvu_poll_reg() Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 21/29] Set fc_nlinfo in nh_create_ipv4, nh_create_ipv6 Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 22/29] flow: fix object-size-mismatch warning in flowi{4,6}_to_flowi_common() Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 23/29] net: usb: cdc_mbim: avoid altsetting toggling for Telit LN920 Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 24/29] block, bfq: honor already-setup queue merges Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 25/29] PCI: ibmphp: Fix double unmap of io_mem Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 26/29] ethtool: Fix an error code in cxgb2.c Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 27/29] NTB: Fix an error code in ntb_msit_probe() Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 28/29] NTB: perf: Fix an error code in perf_setup_inbuf() Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.13 29/29] net: phylink: add suspend/resume support Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210911131233.284800-2-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=anibal.limon@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=loic.poulain@linaro.org \
    --cc=mathieu.poirier@linaro.org \
    --cc=stable@vger.kernel.org \
    --subject='Re: [PATCH AUTOSEL 5.13 02/29] remoteproc: qcom: wcnss: Fix race with iris probe' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).