LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Sasha Levin <sashal@kernel.org>,
	linux-omap@vger.kernel.org, linux-pci@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 5.10 13/25] PCI: j721e: Add PCIe support for J7200
Date: Sat, 11 Sep 2021 09:13:00 -0400	[thread overview]
Message-ID: <20210911131312.285225-13-sashal@kernel.org> (raw)
In-Reply-To: <20210911131312.285225-1-sashal@kernel.org>

From: Kishon Vijay Abraham I <kishon@ti.com>

[ Upstream commit f1de58802f0fff364cf49f5e47d1be744baa434f ]

J7200 has the same PCIe IP as in J721E with minor changes in the
wrapper. J7200 allows byte access of bridge configuration space
registers and the register field for LINK_DOWN interrupt is different.
J7200 also requires "quirk_detect_quiet_flag" to be set. Configure these
changes as part of driver data applicable only to J7200.

Link: https://lore.kernel.org/r/20210811123336.31357-4-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/cadence/pci-j721e.c | 40 +++++++++++++++++++---
 1 file changed, 36 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 973b309ac9ba..2f5a49c77074 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -25,6 +25,7 @@
 #define STATUS_REG_SYS_2	0x508
 #define STATUS_CLR_REG_SYS_2	0x708
 #define LINK_DOWN		BIT(1)
+#define J7200_LINK_DOWN		BIT(10)
 
 #define J721E_PCIE_USER_CMD_STATUS	0x4
 #define LINK_TRAINING_ENABLE		BIT(0)
@@ -54,6 +55,7 @@ struct j721e_pcie {
 	struct cdns_pcie	*cdns_pcie;
 	void __iomem		*user_cfg_base;
 	void __iomem		*intd_cfg_base;
+	u32			linkdown_irq_regfield;
 };
 
 enum j721e_pcie_mode {
@@ -64,6 +66,9 @@ enum j721e_pcie_mode {
 struct j721e_pcie_data {
 	enum j721e_pcie_mode	mode;
 	unsigned int		quirk_retrain_flag:1;
+	unsigned int		quirk_detect_quiet_flag:1;
+	u32			linkdown_irq_regfield;
+	unsigned int		byte_access_allowed:1;
 };
 
 static inline u32 j721e_pcie_user_readl(struct j721e_pcie *pcie, u32 offset)
@@ -95,12 +100,12 @@ static irqreturn_t j721e_pcie_link_irq_handler(int irq, void *priv)
 	u32 reg;
 
 	reg = j721e_pcie_intd_readl(pcie, STATUS_REG_SYS_2);
-	if (!(reg & LINK_DOWN))
+	if (!(reg & pcie->linkdown_irq_regfield))
 		return IRQ_NONE;
 
 	dev_err(dev, "LINK DOWN!\n");
 
-	j721e_pcie_intd_writel(pcie, STATUS_CLR_REG_SYS_2, LINK_DOWN);
+	j721e_pcie_intd_writel(pcie, STATUS_CLR_REG_SYS_2, pcie->linkdown_irq_regfield);
 	return IRQ_HANDLED;
 }
 
@@ -109,7 +114,7 @@ static void j721e_pcie_config_link_irq(struct j721e_pcie *pcie)
 	u32 reg;
 
 	reg = j721e_pcie_intd_readl(pcie, ENABLE_REG_SYS_2);
-	reg |= LINK_DOWN;
+	reg |= pcie->linkdown_irq_regfield;
 	j721e_pcie_intd_writel(pcie, ENABLE_REG_SYS_2, reg);
 }
 
@@ -272,10 +277,25 @@ static struct pci_ops cdns_ti_pcie_host_ops = {
 static const struct j721e_pcie_data j721e_pcie_rc_data = {
 	.mode = PCI_MODE_RC,
 	.quirk_retrain_flag = true,
+	.byte_access_allowed = false,
+	.linkdown_irq_regfield = LINK_DOWN,
 };
 
 static const struct j721e_pcie_data j721e_pcie_ep_data = {
 	.mode = PCI_MODE_EP,
+	.linkdown_irq_regfield = LINK_DOWN,
+};
+
+static const struct j721e_pcie_data j7200_pcie_rc_data = {
+	.mode = PCI_MODE_RC,
+	.quirk_detect_quiet_flag = true,
+	.linkdown_irq_regfield = J7200_LINK_DOWN,
+	.byte_access_allowed = true,
+};
+
+static const struct j721e_pcie_data j7200_pcie_ep_data = {
+	.mode = PCI_MODE_EP,
+	.quirk_detect_quiet_flag = true,
 };
 
 static const struct of_device_id of_j721e_pcie_match[] = {
@@ -287,6 +307,14 @@ static const struct of_device_id of_j721e_pcie_match[] = {
 		.compatible = "ti,j721e-pcie-ep",
 		.data = &j721e_pcie_ep_data,
 	},
+	{
+		.compatible = "ti,j7200-pcie-host",
+		.data = &j7200_pcie_rc_data,
+	},
+	{
+		.compatible = "ti,j7200-pcie-ep",
+		.data = &j7200_pcie_ep_data,
+	},
 	{},
 };
 
@@ -319,6 +347,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 
 	pcie->dev = dev;
 	pcie->mode = mode;
+	pcie->linkdown_irq_regfield = data->linkdown_irq_regfield;
 
 	base = devm_platform_ioremap_resource_byname(pdev, "intd_cfg");
 	if (IS_ERR(base))
@@ -378,9 +407,11 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 			goto err_get_sync;
 		}
 
-		bridge->ops = &cdns_ti_pcie_host_ops;
+		if (!data->byte_access_allowed)
+			bridge->ops = &cdns_ti_pcie_host_ops;
 		rc = pci_host_bridge_priv(bridge);
 		rc->quirk_retrain_flag = data->quirk_retrain_flag;
+		rc->quirk_detect_quiet_flag = data->quirk_detect_quiet_flag;
 
 		cdns_pcie = &rc->pcie;
 		cdns_pcie->dev = dev;
@@ -430,6 +461,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 			ret = -ENOMEM;
 			goto err_get_sync;
 		}
+		ep->quirk_detect_quiet_flag = data->quirk_detect_quiet_flag;
 
 		cdns_pcie = &ep->pcie;
 		cdns_pcie->dev = dev;
-- 
2.30.2


  parent reply	other threads:[~2021-09-11 13:17 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-11 13:12 [PATCH AUTOSEL 5.10 01/25] dt-bindings: mtd: gpmc: Fix the ECC bytes vs. OOB bytes equation Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.10 02/25] mfd: db8500-prcmu: Adjust map to reality Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.10 03/25] PCI: Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.10 04/25] fuse: fix use after free in fuse_read_interrupt() Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.10 05/25] PCI: tegra194: Fix handling BME_CHGED event Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.10 06/25] PCI: tegra194: Fix MSI-X programming Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.10 07/25] PCI: tegra: Fix OF node reference leak Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.10 08/25] mfd: Don't use irq_create_mapping() to resolve a mapping Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.10 09/25] PCI: rcar: Fix runtime PM imbalance in rcar_pcie_ep_probe() Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.10 10/25] tracing/probes: Reject events which have the same name of existing one Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.10 11/25] PCI: cadence: Use bitfield for *quirk_retrain_flag* instead of bool Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.10 12/25] PCI: cadence: Add quirk flag to set minimum delay in LTSSM Detect.Quiet state Sasha Levin
2021-09-11 13:13 ` Sasha Levin [this message]
2021-09-11 13:13 ` [PATCH AUTOSEL 5.10 14/25] PCI: j721e: Add PCIe support for AM64 Sasha Levin
2021-09-11 13:13 ` [PATCH AUTOSEL 5.10 15/25] PCI: Add ACS quirks for Cavium multi-function devices Sasha Levin
2021-09-11 13:13 ` [PATCH AUTOSEL 5.10 16/25] watchdog: Start watchdog in watchdog_set_last_hw_keepalive only if appropriate Sasha Levin
2021-09-11 13:13 ` [PATCH AUTOSEL 5.10 17/25] octeontx2-af: Add additional register check to rvu_poll_reg() Sasha Levin
2021-09-11 13:13 ` [PATCH AUTOSEL 5.10 18/25] Set fc_nlinfo in nh_create_ipv4, nh_create_ipv6 Sasha Levin
2021-09-11 13:13 ` [PATCH AUTOSEL 5.10 19/25] net: usb: cdc_mbim: avoid altsetting toggling for Telit LN920 Sasha Levin
2021-09-11 13:13 ` [PATCH AUTOSEL 5.10 20/25] block, bfq: honor already-setup queue merges Sasha Levin
2021-09-11 13:13 ` [PATCH AUTOSEL 5.10 21/25] PCI: ibmphp: Fix double unmap of io_mem Sasha Levin
2021-09-11 13:13 ` [PATCH AUTOSEL 5.10 22/25] ethtool: Fix an error code in cxgb2.c Sasha Levin
2021-09-11 13:13 ` [PATCH AUTOSEL 5.10 23/25] NTB: Fix an error code in ntb_msit_probe() Sasha Levin
2021-09-11 13:13 ` [PATCH AUTOSEL 5.10 24/25] NTB: perf: Fix an error code in perf_setup_inbuf() Sasha Levin
2021-09-11 13:13 ` [PATCH AUTOSEL 5.10 25/25] net: phylink: add suspend/resume support Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210911131312.285225-13-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=stable@vger.kernel.org \
    --subject='Re: [PATCH AUTOSEL 5.10 13/25] PCI: j721e: Add PCIe support for J7200' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).