Re: [PATCH v2 3/3] iio: adc: ad7793: Fix IRQ flag

[Jonathan Cameron <jic23@kernel.org>]

On Mon, 6 Sep 2021 09:56:30 +0300
<alexandru.tachici@analog.com> wrote:

> From: Alexandru Tachici <alexandru.tachici@analog.com>
> 
> In Sigma-Delta devices the SDO line is also used as an interrupt.
> Leaving IRQ on level instead of falling might trigger a sample read
> when the IRQ is enabled, as the SDO line is already low. Not sure
> if SDO line will always imediately go high in ad_sd_buffer_postenable
> before the IRQ is enabled.
> 
> Also the datasheet seem to explicitly say the falling edge of the SDO
> should be used as an interrupt:
> From the AD7793 datasheet: " The DOUT/RDY falling edge can be
> used as an interrupt to a processor"
> 
> Fixes: da4d3d6bb9f6 ("iio: adc: ad-sigma-delta: Allow custom IRQ flags")
> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Applied to the fixes-togreg branch of iio.git and marked for stable.

Thanks,

Jonathan

> ---
>  drivers/iio/adc/ad7793.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c
> index ef3e2d3ecb0c..0e7ab3fb072a 100644
> --- a/drivers/iio/adc/ad7793.c
> +++ b/drivers/iio/adc/ad7793.c
> @@ -206,7 +206,7 @@ static const struct ad_sigma_delta_info ad7793_sigma_delta_info = {
>  	.has_registers = true,
>  	.addr_shift = 3,
>  	.read_mask = BIT(6),
> -	.irq_flags = IRQF_TRIGGER_LOW,
> +	.irq_flags = IRQF_TRIGGER_FALLING,
>  };
>  
>  static const struct ad_sd_calib_data ad7793_calib_arr[6] = {