LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Huacai Chen <chenhuacai@loongson.cn>
To: Arnd Bergmann <arnd@arndb.de>, Andy Lutomirski <luto@kernel.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Peter Zijlstra <peterz@infradead.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	David Airlie <airlied@linux.ie>, Jonathan Corbet <corbet@lwn.net>,
	Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org, Xuefeng Li <lixuefeng@loongson.cn>,
	Yanteng Si <siyanteng@loongson.cn>,
	Huacai Chen <chenhuacai@gmail.com>,
	Jiaxun Yang <jiaxun.yang@flygoat.com>,
	Huacai Chen <chenhuacai@loongson.cn>,
	Jianmin Lv <lvjianmin@loongson.cn>
Subject: [PATCH V3 18/22] LoongArch: Add PCI controller support
Date: Fri, 17 Sep 2021 11:57:32 +0800	[thread overview]
Message-ID: <20210917035736.3934017-19-chenhuacai@loongson.cn> (raw)
In-Reply-To: <20210917035736.3934017-1-chenhuacai@loongson.cn>

Loongson64 based systems are PC-like systems which use PCI/PCIe as its
I/O bus, This patch adds the PCI host controller support for LoongArch.

Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
---
 arch/loongarch/include/asm/dma.h |  13 +++
 arch/loongarch/include/asm/pci.h |  40 ++++++++
 arch/loongarch/pci/acpi.c        | 171 +++++++++++++++++++++++++++++++
 arch/loongarch/pci/pci.c         |  96 +++++++++++++++++
 4 files changed, 320 insertions(+)
 create mode 100644 arch/loongarch/include/asm/dma.h
 create mode 100644 arch/loongarch/include/asm/pci.h
 create mode 100644 arch/loongarch/pci/acpi.c
 create mode 100644 arch/loongarch/pci/pci.c

diff --git a/arch/loongarch/include/asm/dma.h b/arch/loongarch/include/asm/dma.h
new file mode 100644
index 000000000000..a8a58dc93422
--- /dev/null
+++ b/arch/loongarch/include/asm/dma.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020-2021 Loongson Technology Corporation Limited
+ */
+#ifndef __ASM_DMA_H
+#define __ASM_DMA_H
+
+#define MAX_DMA_ADDRESS	PAGE_OFFSET
+#define MAX_DMA32_PFN	(1UL << (32 - PAGE_SHIFT))
+
+extern int isa_dma_bridge_buggy;
+
+#endif
diff --git a/arch/loongarch/include/asm/pci.h b/arch/loongarch/include/asm/pci.h
new file mode 100644
index 000000000000..c5e5d14546f8
--- /dev/null
+++ b/arch/loongarch/include/asm/pci.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020-2021 Loongson Technology Corporation Limited
+ */
+#ifndef _ASM_PCI_H
+#define _ASM_PCI_H
+
+#include <linux/ioport.h>
+#include <linux/list.h>
+#include <linux/types.h>
+#include <asm/io.h>
+
+#define PCIBIOS_MIN_IO		0x4000
+#define PCIBIOS_MIN_MEM		0x20000000
+#define PCIBIOS_MIN_CARDBUS_IO	0x4000
+
+#define HAVE_PCI_MMAP
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE
+
+extern phys_addr_t mcfg_addr_init(int node);
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	return 1; /* always show the domain in /proc */
+}
+
+/*
+ * Can be used to override the logic in pci_scan_bus for skipping
+ * already-configured bus numbers - to be used for buggy BIOSes
+ * or architectures with incomplete PCI setup by the loader
+ */
+static inline unsigned int pcibios_assign_all_busses(void)
+{
+	return 0;
+}
+
+/* generic pci stuff */
+#include <asm-generic/pci.h>
+
+#endif /* _ASM_PCI_H */
diff --git a/arch/loongarch/pci/acpi.c b/arch/loongarch/pci/acpi.c
new file mode 100644
index 000000000000..dc8bc185dcad
--- /dev/null
+++ b/arch/loongarch/pci/acpi.c
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020-2021 Loongson Technology Corporation Limited
+ */
+#include <linux/pci.h>
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/pci-acpi.h>
+#include <linux/pci-ecam.h>
+
+#include <asm/pci.h>
+#include <asm/loongson.h>
+
+struct pci_root_info {
+	struct acpi_pci_root_info common;
+	struct pci_config_window *cfg;
+};
+
+void pcibios_add_bus(struct pci_bus *bus)
+{
+	acpi_pci_add_bus(bus);
+}
+
+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+	struct pci_config_window *cfg = bridge->bus->sysdata;
+	struct acpi_device *adev = to_acpi_device(cfg->parent);
+
+	ACPI_COMPANION_SET(&bridge->dev, adev);
+
+	return 0;
+}
+
+int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
+{
+	struct pci_config_window *cfg = bus->sysdata;
+	struct acpi_device *adev = to_acpi_device(cfg->parent);
+	struct acpi_pci_root *root = acpi_driver_data(adev);
+
+	return root->segment;
+}
+
+static void acpi_release_root_info(struct acpi_pci_root_info *ci)
+{
+	struct pci_root_info *info;
+
+	info = container_of(ci, struct pci_root_info, common);
+	pci_ecam_free(info->cfg);
+	kfree(ci->ops);
+	kfree(info);
+}
+
+static int acpi_prepare_root_resources(struct acpi_pci_root_info *ci)
+{
+	struct acpi_device *device = ci->bridge;
+	struct resource_entry *entry, *tmp;
+	int status;
+
+	status = acpi_pci_probe_root_resources(ci);
+	if (status > 0)
+		return status;
+
+	resource_list_for_each_entry_safe(entry, tmp, &ci->resources) {
+		dev_dbg(&device->dev,
+			   "host bridge window %pR (ignored)\n", entry->res);
+		resource_list_destroy_entry(entry);
+	}
+
+	return 0;
+}
+
+/*
+ * Lookup the bus range for the domain in MCFG, and set up config space
+ * mapping.
+ */
+static struct pci_config_window *
+pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
+{
+	int ret;
+	u16 seg = root->segment;
+	struct device *dev = &root->device->dev;
+	struct resource cfgres;
+	struct resource *bus_res = &root->secondary;
+	struct pci_config_window *cfg;
+	const struct pci_ecam_ops *ecam_ops;
+
+	ret = pci_mcfg_lookup(root, &cfgres, &ecam_ops);
+	if (ret) {
+		dev_err(dev, "%04x:%pR ECAM region not found, use default value\n", seg, bus_res);
+		root->mcfg_addr = mcfg_addr_init(0);
+		ecam_ops = &loongson_pci_ecam_ops;
+	}
+
+	cfgres.start = root->mcfg_addr + (bus_res->start << ecam_ops->bus_shift);
+	cfgres.end = cfgres.start + (resource_size(bus_res) << ecam_ops->bus_shift) - 1;
+	cfgres.flags = IORESOURCE_MEM;
+
+	cfg = pci_ecam_create(dev, &cfgres, bus_res, ecam_ops);
+	if (IS_ERR(cfg)) {
+		dev_err(dev, "%04x:%pR error %ld mapping ECAM\n", seg, bus_res,
+			PTR_ERR(cfg));
+		return NULL;
+	}
+
+	return cfg;
+}
+
+struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
+{
+	struct pci_bus *bus;
+	struct pci_root_info *info;
+	struct acpi_pci_root_ops *root_ops;
+	int domain = root->segment;
+	int busnum = root->secondary.start;
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info) {
+		pr_warn("pci_bus %04x:%02x: ignored (out of memory)\n", domain, busnum);
+		return NULL;
+	}
+
+	root_ops = kzalloc(sizeof(*root_ops), GFP_KERNEL);
+	if (!root_ops) {
+		kfree(info);
+		return NULL;
+	}
+
+	info->cfg = pci_acpi_setup_ecam_mapping(root);
+	if (!info->cfg) {
+		kfree(info);
+		kfree(root_ops);
+		return NULL;
+	}
+
+	root_ops->release_info = acpi_release_root_info;
+	root_ops->prepare_resources = acpi_prepare_root_resources;
+	root_ops->pci_ops = (struct pci_ops *)&info->cfg->ops->pci_ops;
+
+	bus = pci_find_bus(domain, busnum);
+	if (bus) {
+		memcpy(bus->sysdata, info->cfg, sizeof(struct pci_config_window));
+		kfree(info);
+	} else {
+		bus = acpi_pci_root_create(root, root_ops,
+					   &info->common, info->cfg);
+		if (bus) {
+			/*
+			 * We insert PCI resources into the iomem_resource
+			 * and ioport_resource trees in either
+			 * pci_bus_claim_resources() or
+			 * pci_bus_assign_resources().
+			 */
+			if (pci_has_flag(PCI_PROBE_ONLY)) {
+				pci_bus_claim_resources(bus);
+			} else {
+				struct pci_bus *child;
+
+				pci_bus_size_bridges(bus);
+				pci_bus_assign_resources(bus);
+				list_for_each_entry(child, &bus->children, node)
+					pcie_bus_configure_settings(child);
+			}
+		} else {
+			kfree(info);
+		}
+	}
+
+	return bus;
+}
diff --git a/arch/loongarch/pci/pci.c b/arch/loongarch/pci/pci.c
new file mode 100644
index 000000000000..0e074ba8c189
--- /dev/null
+++ b/arch/loongarch/pci/pci.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020-2021 Loongson Technology Corporation Limited
+ */
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/vgaarb.h>
+#include <asm/loongson.h>
+
+#define PCI_DEVICE_ID_LOONGSON_HOST     0x7a00
+#define PCI_DEVICE_ID_LOONGSON_DC       0x7a06
+
+int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
+						int reg, int len, u32 *val)
+{
+	struct pci_bus *bus_tmp = pci_find_bus(domain, bus);
+
+	if (bus_tmp)
+		return bus_tmp->ops->read(bus_tmp, devfn, reg, len, val);
+	return -EINVAL;
+}
+
+int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
+						int reg, int len, u32 val)
+{
+	struct pci_bus *bus_tmp = pci_find_bus(domain, bus);
+
+	if (bus_tmp)
+		return bus_tmp->ops->write(bus_tmp, devfn, reg, len, val);
+	return -EINVAL;
+}
+
+phys_addr_t mcfg_addr_init(int node)
+{
+	return (((u64)node << 44) | MCFG_EXT_PCICFG_BASE);
+}
+
+static int __init pcibios_init(void)
+{
+	unsigned int lsize;
+
+	/*
+	 * Set PCI cacheline size to that of the highest level in the
+	 * cache hierarchy.
+	 */
+	lsize = cpu_dcache_line_size();
+	lsize = cpu_vcache_line_size() ? : lsize;
+	lsize = cpu_scache_line_size() ? : lsize;
+
+	BUG_ON(!lsize);
+
+	pci_dfl_cache_line_size = lsize >> 2;
+
+	pr_debug("PCI: pci_cache_line_size set to %d bytes\n", lsize);
+
+	return 0;
+}
+
+subsys_initcall(pcibios_init);
+
+int pcibios_add_device(struct pci_dev *dev)
+{
+	int id = pci_domain_nr(dev->bus);
+
+	dev_set_msi_domain(&dev->dev, pch_msi_domain[id]);
+
+	return 0;
+}
+
+int pcibios_alloc_irq(struct pci_dev *dev)
+{
+	if (acpi_disabled)
+		return 0;
+	if (pci_dev_msi_enabled(dev))
+		return 0;
+	return acpi_pci_irq_enable(dev);
+}
+
+static void pci_fixup_vgadev(struct pci_dev *pdev)
+{
+	struct pci_dev *devp = NULL;
+
+	while ((devp = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, devp))) {
+		if (devp->vendor != PCI_VENDOR_ID_LOONGSON) {
+			vga_set_default_device(devp);
+			dev_info(&pdev->dev,
+				"Overriding boot device as %X:%X\n",
+				devp->vendor, devp->device);
+		}
+	}
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, PCI_DEVICE_ID_LOONGSON_DC, pci_fixup_vgadev);
-- 
2.27.0


  parent reply	other threads:[~2021-09-17  4:09 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-17  3:57 [PATCH V3 00/22] arch: Add basic LoongArch support Huacai Chen
2021-09-17  3:57 ` [PATCH V3 01/22] Documentation: LoongArch: Add basic documentations Huacai Chen
2021-09-23 20:37   ` Pavel Machek
2021-09-24  4:07     ` Huacai Chen
2021-09-23 20:59   ` Pavel Machek
2021-09-24  4:10     ` Huacai Chen
2021-09-24  6:58       ` Pavel Machek
2021-09-24  7:31         ` Huacai Chen
2021-09-17  3:57 ` [PATCH V3 02/22] Documentation/zh_CN: Add basic LoongArch documentations Huacai Chen
2021-09-17  3:57 ` [PATCH V3 03/22] LoongArch: Add elf-related definitions Huacai Chen
2021-09-17  3:57 ` [PATCH V3 04/22] LoongArch: Add writecombine support for drm Huacai Chen
2021-09-17  3:57 ` [PATCH V3 05/22] LoongArch: Add build infrastructure Huacai Chen
2021-09-17  7:53   ` Arnd Bergmann
2021-09-18  4:35     ` Huacai Chen
2021-09-17  3:57 ` [PATCH V3 06/22] LoongArch: Add CPU definition headers Huacai Chen
2021-09-17  3:57 ` [PATCH V3 07/22] LoongArch: Add atomic/locking headers Huacai Chen
2021-09-17  3:57 ` [PATCH V3 08/22] LoongArch: Add other common headers Huacai Chen
2021-09-17  3:57 ` [PATCH V3 09/22] LoongArch: Add boot and setup routines Huacai Chen
2021-09-17  8:11   ` Arnd Bergmann
2021-09-18  4:54     ` Huacai Chen
2021-09-17  3:57 ` [PATCH V3 10/22] LoongArch: Add exception/interrupt handling Huacai Chen
2021-09-17  3:57 ` [PATCH V3 11/22] LoongArch: Add process management Huacai Chen
2021-09-17  3:57 ` [PATCH V3 12/22] LoongArch: Add memory management Huacai Chen
2021-09-17  3:57 ` [PATCH V3 13/22] LoongArch: Add system call support Huacai Chen
2021-09-17  8:24   ` Arnd Bergmann
2021-09-18  6:55     ` Huacai Chen
2021-09-17  3:57 ` [PATCH V3 14/22] LoongArch: Add signal handling support Huacai Chen
2021-09-17  8:26   ` Arnd Bergmann
2021-09-17 21:10   ` Eric W. Biederman
2021-09-18  7:12     ` Huacai Chen
2021-09-19  9:58       ` Arnd Bergmann
2021-09-20  2:36         ` Huacai Chen
2021-09-20 21:14           ` Richard Henderson
2021-09-22  2:43             ` Huacai Chen
2021-09-17  3:57 ` [PATCH V3 15/22] LoongArch: Add elf and module support Huacai Chen
2021-09-17  8:28   ` Arnd Bergmann
2021-09-18  7:14     ` Huacai Chen
2021-09-17  3:57 ` [PATCH V3 16/22] LoongArch: Add misc common routines Huacai Chen
2021-09-17  6:10   ` Christoph Hellwig
2021-09-17  6:36     ` Huacai Chen
2021-09-17  3:57 ` [PATCH V3 17/22] LoongArch: Add some library functions Huacai Chen
2021-09-17  8:33   ` Arnd Bergmann
2021-09-18  7:16     ` Huacai Chen
2021-09-17  3:57 ` Huacai Chen [this message]
2021-09-17  9:02   ` [PATCH V3 18/22] LoongArch: Add PCI controller support Arnd Bergmann
2021-09-18  7:36     ` Huacai Chen
2021-09-21 22:36       ` Bjorn Helgaas
2021-09-22 15:33         ` Arnd Bergmann
2021-09-17  3:57 ` [PATCH V3 19/22] LoongArch: Add VDSO and VSYSCALL support Huacai Chen
2021-09-17  3:57 ` [PATCH V3 20/22] LoongArch: Add multi-processor (SMP) support Huacai Chen
2021-09-17  9:57   ` Arnd Bergmann
2021-09-18  7:22     ` Huacai Chen
2021-09-17  3:57 ` [PATCH V3 21/22] LoongArch: Add Non-Uniform Memory Access (NUMA) support Huacai Chen
2021-09-17  6:15   ` Christoph Hellwig
2021-09-17  6:40     ` Huacai Chen
2021-09-17  3:57 ` [PATCH V3 22/22] LoongArch: Add Loongson-3 default config file Huacai Chen
2021-09-17  9:59 ` [PATCH V3 00/22] arch: Add basic LoongArch support Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210917035736.3934017-19-chenhuacai@loongson.cn \
    --to=chenhuacai@loongson.cn \
    --cc=airlied@linux.ie \
    --cc=akpm@linux-foundation.org \
    --cc=arnd@arndb.de \
    --cc=chenhuacai@gmail.com \
    --cc=corbet@lwn.net \
    --cc=jiaxun.yang@flygoat.com \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lixuefeng@loongson.cn \
    --cc=luto@kernel.org \
    --cc=lvjianmin@loongson.cn \
    --cc=peterz@infradead.org \
    --cc=siyanteng@loongson.cn \
    --cc=tglx@linutronix.de \
    --cc=torvalds@linux-foundation.org \
    --subject='Re: [PATCH V3 18/22] LoongArch: Add PCI controller support' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).