LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH 0/3] staging: r8188eu: clean up PatchID / customer id
@ 2021-10-06  9:09 Martin Kaiser
  2021-10-06  9:09 ` [PATCH 1/3] staging: r8188eu: hal data's customer id is always 0 Martin Kaiser
                   ` (3 more replies)
  0 siblings, 4 replies; 5+ messages in thread
From: Martin Kaiser @ 2021-10-06  9:09 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: Larry Finger, Phillip Potter, Michael Straube, linux-staging,
	linux-kernel, Martin Kaiser

This series should be applied on top of the series I sent yesterday
(starting with Message-Id: <20211005200821.19783-1-martin@kaiser.cx>)

Thanks,
Martin

Martin Kaiser (3):
  staging: r8188eu: hal data's customer id is always 0
  staging: r8188eu: Odm PatchID is always 0
  staging: r8188eu: merge two signal scale mapping functions

 drivers/staging/r8188eu/hal/odm.c             |  7 --
 drivers/staging/r8188eu/hal/odm_HWConfig.c    | 65 +++++--------------
 drivers/staging/r8188eu/hal/rtl8188e_dm.c     |  1 -
 drivers/staging/r8188eu/hal/usb_halinit.c     |  2 +-
 drivers/staging/r8188eu/include/odm.h         |  2 -
 .../staging/r8188eu/include/rtl8188e_hal.h    |  2 -
 drivers/staging/r8188eu/include/rtw_eeprom.h  | 55 ----------------
 7 files changed, 19 insertions(+), 115 deletions(-)

-- 
2.20.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH 1/3] staging: r8188eu: hal data's customer id is always 0
  2021-10-06  9:09 [PATCH 0/3] staging: r8188eu: clean up PatchID / customer id Martin Kaiser
@ 2021-10-06  9:09 ` Martin Kaiser
  2021-10-06  9:09 ` [PATCH 2/3] staging: r8188eu: Odm PatchID " Martin Kaiser
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 5+ messages in thread
From: Martin Kaiser @ 2021-10-06  9:09 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: Larry Finger, Phillip Potter, Michael Straube, linux-staging,
	linux-kernel, Martin Kaiser

CustomerID in struct hal_data_8188e is never set, it remains at the
default value 0.

Remove CustomerID and fix the two places where it was used.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---
 drivers/staging/r8188eu/hal/rtl8188e_dm.c     |  2 +-
 drivers/staging/r8188eu/hal/usb_halinit.c     |  2 +-
 .../staging/r8188eu/include/rtl8188e_hal.h    |  2 -
 drivers/staging/r8188eu/include/rtw_eeprom.h  | 55 -------------------
 4 files changed, 2 insertions(+), 59 deletions(-)

diff --git a/drivers/staging/r8188eu/hal/rtl8188e_dm.c b/drivers/staging/r8188eu/hal/rtl8188e_dm.c
index 1a0176a60704..1bfe12b5fefb 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_dm.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_dm.c
@@ -52,7 +52,7 @@ static void Init_ODM_ComInfo_88E(struct adapter *Adapter)
 
 	ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_MP_TEST_CHIP, IS_NORMAL_CHIP(hal_data->VersionID));
 
-	ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_PATCH_ID, hal_data->CustomerID);
+	ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_PATCH_ID, 0);
 	ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_BWIFI_TEST, Adapter->registrypriv.wifi_spec);
 
 	if (hal_data->rf_type == RF_1T1R)
diff --git a/drivers/staging/r8188eu/hal/usb_halinit.c b/drivers/staging/r8188eu/hal/usb_halinit.c
index 1e6885d75bf3..61d3209953f7 100644
--- a/drivers/staging/r8188eu/hal/usb_halinit.c
+++ b/drivers/staging/r8188eu/hal/usb_halinit.c
@@ -1420,7 +1420,7 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
 				}
 
 				if (check_fwstate(pmlmepriv, WIFI_STATION_STATE))
-					RetryLimit = (haldata->CustomerID == RT_CID_CCX) ? 7 : 48;
+					RetryLimit = 48;
 				else /*  Ad-hoc Mode */
 					RetryLimit = 0x7;
 			} else if (type == 1) {
diff --git a/drivers/staging/r8188eu/include/rtl8188e_hal.h b/drivers/staging/r8188eu/include/rtl8188e_hal.h
index b374398bad24..66ecd3c3ac13 100644
--- a/drivers/staging/r8188eu/include/rtl8188e_hal.h
+++ b/drivers/staging/r8188eu/include/rtl8188e_hal.h
@@ -209,8 +209,6 @@ struct txpowerinfo24g {
 
 struct hal_data_8188e {
 	struct HAL_VERSION	VersionID;
-	u16	CustomerID;
-
 	u16	FirmwareVersion;
 	u16	FirmwareVersionRev;
 	u16	FirmwareSubVersion;
diff --git a/drivers/staging/r8188eu/include/rtw_eeprom.h b/drivers/staging/r8188eu/include/rtw_eeprom.h
index d0c812cf5cc2..e517239bd75e 100644
--- a/drivers/staging/r8188eu/include/rtw_eeprom.h
+++ b/drivers/staging/r8188eu/include/rtw_eeprom.h
@@ -40,61 +40,6 @@
 #define	EEPROM_CID_CLEVO		0x13
 #define	EEPROM_CID_WHQL			0xFE
 
-/*  Customer ID, note that: */
-/*  This variable is initiailzed through EEPROM or registry, */
-/*  however, its definition may be different with that in EEPROM for */
-/*  EEPROM size consideration. So, we have to perform proper translation
- *  between them. */
-/*  Besides, CustomerID of registry has precedence of that of EEPROM. */
-/*  defined below. 060703, by rcnjko. */
-enum RT_CUSTOMER_ID {
-	RT_CID_DEFAULT = 0,
-	RT_CID_8187_ALPHA0 = 1,
-	RT_CID_8187_SERCOMM_PS = 2,
-	RT_CID_8187_HW_LED = 3,
-	RT_CID_8187_NETGEAR = 4,
-	RT_CID_WHQL = 5,
-	RT_CID_819x_CAMEO  = 6,
-	RT_CID_819x_RUNTOP = 7,
-	RT_CID_819x_Senao = 8,
-	RT_CID_TOSHIBA = 9,	/*  Merge by Jacken, 2008/01/31. */
-	RT_CID_819x_Netcore = 10,
-	RT_CID_Nettronix = 11,
-	RT_CID_DLINK = 12,
-	RT_CID_PRONET = 13,
-	RT_CID_COREGA = 14,
-	RT_CID_CHINA_MOBILE = 15,
-	RT_CID_819x_ALPHA = 16,
-	RT_CID_819x_Sitecom = 17,
-	RT_CID_CCX = 18, /*  It's set under CCX logo test and isn't demanded
-			  * for CCX functions, but for test behavior like retry
-			  * limit and tx report. By Bruce, 2009-02-17. */
-	RT_CID_819x_Lenovo = 19,
-	RT_CID_819x_QMI = 20,
-	RT_CID_819x_Edimax_Belkin = 21,
-	RT_CID_819x_Sercomm_Belkin = 22,
-	RT_CID_819x_CAMEO1 = 23,
-	RT_CID_819x_MSI = 24,
-	RT_CID_819x_Acer = 25,
-	RT_CID_819x_AzWave_ASUS = 26,
-	RT_CID_819x_AzWave = 27, /*  For AzWave in PCIe,i
-				  * The ID is AzWave use and not only Asus */
-	RT_CID_819x_HP = 28,
-	RT_CID_819x_WNC_COREGA = 29,
-	RT_CID_819x_Arcadyan_Belkin = 30,
-	RT_CID_819x_SAMSUNG = 31,
-	RT_CID_819x_CLEVO = 32,
-	RT_CID_819x_DELL = 33,
-	RT_CID_819x_PRONETS = 34,
-	RT_CID_819x_Edimax_ASUS = 35,
-	RT_CID_819x_CAMEO_NETGEAR = 36,
-	RT_CID_PLANEX = 37,
-	RT_CID_CC_C = 38,
-	RT_CID_819x_Xavi = 39,
-	RT_CID_819x_FUNAI_TV = 40,
-	RT_CID_819x_ALPHA_WD=41,
-};
-
 struct eeprom_priv {
 	u8		bautoload_fail_flag;
 	u8		bloadfile_fail_flag;
-- 
2.20.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH 2/3] staging: r8188eu: Odm PatchID is always 0
  2021-10-06  9:09 [PATCH 0/3] staging: r8188eu: clean up PatchID / customer id Martin Kaiser
  2021-10-06  9:09 ` [PATCH 1/3] staging: r8188eu: hal data's customer id is always 0 Martin Kaiser
@ 2021-10-06  9:09 ` Martin Kaiser
  2021-10-06  9:09 ` [PATCH 3/3] staging: r8188eu: merge two signal scale mapping functions Martin Kaiser
  2021-10-06 18:39 ` [PATCH 0/3] staging: r8188eu: clean up PatchID / customer id Michael Straube
  3 siblings, 0 replies; 5+ messages in thread
From: Martin Kaiser @ 2021-10-06  9:09 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: Larry Finger, Phillip Potter, Michael Straube, linux-staging,
	linux-kernel, Martin Kaiser

PatchID is a copy of the hal customer id that is always 0.

Remove PatchID from struct odm_dm_struct and the code that is
executed only for PatchID != 0.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---
 drivers/staging/r8188eu/hal/odm.c          |  7 ---
 drivers/staging/r8188eu/hal/odm_HWConfig.c | 60 +++++++---------------
 drivers/staging/r8188eu/hal/rtl8188e_dm.c  |  1 -
 drivers/staging/r8188eu/include/odm.h      |  2 -
 4 files changed, 18 insertions(+), 52 deletions(-)

diff --git a/drivers/staging/r8188eu/hal/odm.c b/drivers/staging/r8188eu/hal/odm.c
index bc49dc856a60..d15d62927db1 100644
--- a/drivers/staging/r8188eu/hal/odm.c
+++ b/drivers/staging/r8188eu/hal/odm.c
@@ -262,9 +262,6 @@ void ODM_CmnInfoInit(struct odm_dm_struct *pDM_Odm, enum odm_common_info_def Cmn
 	case	ODM_CMNINFO_EXT_TRSW:
 		pDM_Odm->ExtTRSW = (u8)Value;
 		break;
-	case	ODM_CMNINFO_PATCH_ID:
-		pDM_Odm->PatchID = (u8)Value;
-		break;
 	case	ODM_CMNINFO_BINHCT_TEST:
 		pDM_Odm->bInHctTest = (bool)Value;
 		break;
@@ -863,10 +860,6 @@ void ODM_RF_Saving(struct odm_dm_struct *pDM_Odm, u8 bForceInNormal)
 	u8 Rssi_Up_bound = 30;
 	u8 Rssi_Low_bound = 25;
 
-	if (pDM_Odm->PatchID == 40) { /* RT_CID_819x_FUNAI_TV */
-		Rssi_Up_bound = 50;
-		Rssi_Low_bound = 45;
-	}
 	if (pDM_PSTable->initialize == 0) {
 		pDM_PSTable->reg_874 = (ODM_GetBBReg(pDM_Odm, 0x874, bMaskDWord) & 0x1CC000) >> 14;
 		pDM_PSTable->reg_c70 = (ODM_GetBBReg(pDM_Odm, 0xc70, bMaskDWord) & BIT(3)) >> 3;
diff --git a/drivers/staging/r8188eu/hal/odm_HWConfig.c b/drivers/staging/r8188eu/hal/odm_HWConfig.c
index 2383f965f689..c9c2bc35906c 100644
--- a/drivers/staging/r8188eu/hal/odm_HWConfig.c
+++ b/drivers/staging/r8188eu/hal/odm_HWConfig.c
@@ -43,17 +43,7 @@ static s32 odm_SignalScaleMapping_92CSeries(struct odm_dm_struct *dm_odm, s32 Cu
 
 static s32 odm_SignalScaleMapping(struct odm_dm_struct *dm_odm, s32 CurrSig)
 {
-	if ((dm_odm->SupportPlatform == ODM_MP) && (dm_odm->PatchID == 10))
-		return 0;
-	else
-		return odm_SignalScaleMapping_92CSeries(dm_odm, CurrSig);
-}
-
-/* pMgntInfo->CustomerID == RT_CID_819x_Lenovo */
-static u8 odm_SQ_process_patch_RT_CID_819x_Lenovo(struct odm_dm_struct *dm_odm,
-	u8 isCCKrate, u8 PWDB_ALL, u8 path, u8 RSSI)
-{
-	return 0;
+	return odm_SignalScaleMapping_92CSeries(dm_odm, CurrSig);
 }
 
 static u8 odm_evm_db_to_percentage(s8 value)
@@ -158,9 +148,7 @@ static void odm_RxPhyStatus92CSeries_Parsing(struct odm_dm_struct *dm_odm,
 		if (pPktinfo->bPacketMatchBSSID) {
 			u8 SQ, SQ_rpt;
 
-			if ((dm_odm->SupportPlatform == ODM_MP) && (dm_odm->PatchID == 19)) {
-				SQ = odm_SQ_process_patch_RT_CID_819x_Lenovo(dm_odm, isCCKrate, PWDB_ALL, 0, 0);
-			} else if (pPhyInfo->RxPWDBAll > 40 && !dm_odm->bInHctTest) {
+			if (pPhyInfo->RxPWDBAll > 40 && !dm_odm->bInHctTest) {
 				SQ = 100;
 			} else {
 				SQ_rpt = pPhyStaRpt->cck_sig_qual_ofdm_pwdb_all;
@@ -212,14 +200,6 @@ static void odm_RxPhyStatus92CSeries_Parsing(struct odm_dm_struct *dm_odm,
 			/* Get Rx snr value in DB */
 			pPhyInfo->RxSNR[i] = (s32)(pPhyStaRpt->path_rxsnr[i] / 2);
 			dm_odm->PhyDbgInfo.RxSNRdB[i] = (s32)(pPhyStaRpt->path_rxsnr[i] / 2);
-
-			/* Record Signal Strength for next packet */
-			if (pPktinfo->bPacketMatchBSSID) {
-				if ((dm_odm->SupportPlatform == ODM_MP) && (dm_odm->PatchID == 19)) {
-					if (i == RF_PATH_A)
-						pPhyInfo->SignalQuality = odm_SQ_process_patch_RT_CID_819x_Lenovo(dm_odm, isCCKrate, PWDB_ALL, i, RSSI);
-				}
-			}
 		}
 		/*  (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive) */
 		rx_pwr_all = (((pPhyStaRpt->cck_sig_qual_ofdm_pwdb_all) >> 1) & 0x7f) - 110;
@@ -232,26 +212,22 @@ static void odm_RxPhyStatus92CSeries_Parsing(struct odm_dm_struct *dm_odm,
 		pPhyInfo->RxPower = rx_pwr_all;
 		pPhyInfo->RecvSignalPower = rx_pwr_all;
 
-		if ((dm_odm->SupportPlatform == ODM_MP) && (dm_odm->PatchID == 19)) {
-			/* do nothing */
-		} else {
-			/*  (3)EVM of HT rate */
-			if (pPktinfo->Rate >= DESC92C_RATEMCS8 && pPktinfo->Rate <= DESC92C_RATEMCS15)
-				Max_spatial_stream = 2; /* both spatial stream make sense */
-			else
-				Max_spatial_stream = 1; /* only spatial stream 1 makes sense */
-
-			for (i = 0; i < Max_spatial_stream; i++) {
-				/*  Do not use shift operation like "rx_evmX >>= 1" because the compilor of free build environment */
-				/*  fill most significant bit to "zero" when doing shifting operation which may change a negative */
-				/*  value to positive one, then the dbm value (which is supposed to be negative)  is not correct anymore. */
-				EVM = odm_evm_db_to_percentage((pPhyStaRpt->stream_rxevm[i]));	/* dbm */
-
-				if (pPktinfo->bPacketMatchBSSID) {
-					if (i == RF_PATH_A) /*  Fill value in RFD, Get the first spatial stream only */
-						pPhyInfo->SignalQuality = (u8)(EVM & 0xff);
-					pPhyInfo->RxMIMOSignalQuality[i] = (u8)(EVM & 0xff);
-				}
+		/*  (3)EVM of HT rate */
+		if (pPktinfo->Rate >= DESC92C_RATEMCS8 && pPktinfo->Rate <= DESC92C_RATEMCS15)
+			Max_spatial_stream = 2; /* both spatial stream make sense */
+		else
+			Max_spatial_stream = 1; /* only spatial stream 1 makes sense */
+
+		for (i = 0; i < Max_spatial_stream; i++) {
+			/*  Do not use shift operation like "rx_evmX >>= 1" because the compilor of free build environment */
+			/*  fill most significant bit to "zero" when doing shifting operation which may change a negative */
+			/*  value to positive one, then the dbm value (which is supposed to be negative)  is not correct anymore. */
+			EVM = odm_evm_db_to_percentage((pPhyStaRpt->stream_rxevm[i]));	/* dbm */
+
+			if (pPktinfo->bPacketMatchBSSID) {
+				if (i == RF_PATH_A) /*  Fill value in RFD, Get the first spatial stream only */
+					pPhyInfo->SignalQuality = (u8)(EVM & 0xff);
+				pPhyInfo->RxMIMOSignalQuality[i] = (u8)(EVM & 0xff);
 			}
 		}
 	}
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_dm.c b/drivers/staging/r8188eu/hal/rtl8188e_dm.c
index 1bfe12b5fefb..d5fd97268145 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_dm.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_dm.c
@@ -52,7 +52,6 @@ static void Init_ODM_ComInfo_88E(struct adapter *Adapter)
 
 	ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_MP_TEST_CHIP, IS_NORMAL_CHIP(hal_data->VersionID));
 
-	ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_PATCH_ID, 0);
 	ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_BWIFI_TEST, Adapter->registrypriv.wifi_spec);
 
 	if (hal_data->rf_type == RF_1T1R)
diff --git a/drivers/staging/r8188eu/include/odm.h b/drivers/staging/r8188eu/include/odm.h
index 48d383f91c16..2a65c3dfad3a 100644
--- a/drivers/staging/r8188eu/include/odm.h
+++ b/drivers/staging/r8188eu/include/odm.h
@@ -285,7 +285,6 @@ enum odm_common_info_def {
 	ODM_CMNINFO_EXT_LNA,		/* true */
 	ODM_CMNINFO_EXT_PA,
 	ODM_CMNINFO_EXT_TRSW,
-	ODM_CMNINFO_PATCH_ID,		/* CUSTOMER ID */
 	ODM_CMNINFO_BINHCT_TEST,
 	ODM_CMNINFO_BWIFI_TEST,
 	ODM_CMNINFO_SMART_CONCURRENT,
@@ -693,7 +692,6 @@ struct odm_dm_struct {
 	u8	ExtPA;
 	/*  with external TRSW  NO/Yes = 0/1 */
 	u8	ExtTRSW;
-	u8	PatchID; /* Customer ID */
 	bool	bInHctTest;
 	bool	bWIFITest;
 
-- 
2.20.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH 3/3] staging: r8188eu: merge two signal scale mapping functions
  2021-10-06  9:09 [PATCH 0/3] staging: r8188eu: clean up PatchID / customer id Martin Kaiser
  2021-10-06  9:09 ` [PATCH 1/3] staging: r8188eu: hal data's customer id is always 0 Martin Kaiser
  2021-10-06  9:09 ` [PATCH 2/3] staging: r8188eu: Odm PatchID " Martin Kaiser
@ 2021-10-06  9:09 ` Martin Kaiser
  2021-10-06 18:39 ` [PATCH 0/3] staging: r8188eu: clean up PatchID / customer id Michael Straube
  3 siblings, 0 replies; 5+ messages in thread
From: Martin Kaiser @ 2021-10-06  9:09 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: Larry Finger, Phillip Potter, Michael Straube, linux-staging,
	linux-kernel, Martin Kaiser

Keep the odm_SignalScaleMapping function and remove
odm_SignalScaleMapping_92CSeries.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---
 drivers/staging/r8188eu/hal/odm_HWConfig.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/staging/r8188eu/hal/odm_HWConfig.c b/drivers/staging/r8188eu/hal/odm_HWConfig.c
index c9c2bc35906c..2ae1a001d339 100644
--- a/drivers/staging/r8188eu/hal/odm_HWConfig.c
+++ b/drivers/staging/r8188eu/hal/odm_HWConfig.c
@@ -17,7 +17,7 @@ static u8 odm_QueryRxPwrPercentage(s8 AntPower)
 		return 100 + AntPower;
 }
 
-static s32 odm_SignalScaleMapping_92CSeries(struct odm_dm_struct *dm_odm, s32 CurrSig)
+static s32 odm_SignalScaleMapping(struct odm_dm_struct *dm_odm, s32 CurrSig)
 {
 	s32 RetSig = 0;
 
@@ -41,11 +41,6 @@ static s32 odm_SignalScaleMapping_92CSeries(struct odm_dm_struct *dm_odm, s32 Cu
 	return RetSig;
 }
 
-static s32 odm_SignalScaleMapping(struct odm_dm_struct *dm_odm, s32 CurrSig)
-{
-	return odm_SignalScaleMapping_92CSeries(dm_odm, CurrSig);
-}
-
 static u8 odm_evm_db_to_percentage(s8 value)
 {
 	/*  -33dB~0dB to 0%~99% */
-- 
2.20.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH 0/3] staging: r8188eu: clean up PatchID / customer id
  2021-10-06  9:09 [PATCH 0/3] staging: r8188eu: clean up PatchID / customer id Martin Kaiser
                   ` (2 preceding siblings ...)
  2021-10-06  9:09 ` [PATCH 3/3] staging: r8188eu: merge two signal scale mapping functions Martin Kaiser
@ 2021-10-06 18:39 ` Michael Straube
  3 siblings, 0 replies; 5+ messages in thread
From: Michael Straube @ 2021-10-06 18:39 UTC (permalink / raw)
  To: Martin Kaiser, Greg Kroah-Hartman
  Cc: Larry Finger, Phillip Potter, linux-staging, linux-kernel

On 10/6/21 11:09, Martin Kaiser wrote:
> This series should be applied on top of the series I sent yesterday
> (starting with Message-Id: <20211005200821.19783-1-martin@kaiser.cx>)
> 
> Thanks,
> Martin
> 
> Martin Kaiser (3):
>    staging: r8188eu: hal data's customer id is always 0
>    staging: r8188eu: Odm PatchID is always 0
>    staging: r8188eu: merge two signal scale mapping functions
> 
>   drivers/staging/r8188eu/hal/odm.c             |  7 --
>   drivers/staging/r8188eu/hal/odm_HWConfig.c    | 65 +++++--------------
>   drivers/staging/r8188eu/hal/rtl8188e_dm.c     |  1 -
>   drivers/staging/r8188eu/hal/usb_halinit.c     |  2 +-
>   drivers/staging/r8188eu/include/odm.h         |  2 -
>   .../staging/r8188eu/include/rtl8188e_hal.h    |  2 -
>   drivers/staging/r8188eu/include/rtw_eeprom.h  | 55 ----------------
>   7 files changed, 19 insertions(+), 115 deletions(-)
> 

Builds and looks good to me.
For all 3 patches:

Acked-by: Michael Straube <straube.linux@gmail.com>

Thanks,
Michael

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2021-10-06 18:40 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-06  9:09 [PATCH 0/3] staging: r8188eu: clean up PatchID / customer id Martin Kaiser
2021-10-06  9:09 ` [PATCH 1/3] staging: r8188eu: hal data's customer id is always 0 Martin Kaiser
2021-10-06  9:09 ` [PATCH 2/3] staging: r8188eu: Odm PatchID " Martin Kaiser
2021-10-06  9:09 ` [PATCH 3/3] staging: r8188eu: merge two signal scale mapping functions Martin Kaiser
2021-10-06 18:39 ` [PATCH 0/3] staging: r8188eu: clean up PatchID / customer id Michael Straube

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).