LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Trevor Woerner <twoerner@gmail.com>
To: Ezequiel Garcia <ezequiel@collabora.com>
Cc: linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
	Richard Weinberger <richard@nod.at>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Vignesh Raghavendra <vigneshr@ti.com>
Subject: Re: [PATCH 0/3] mtdblock: Advertise about UBI and UBI block
Date: Tue, 26 Oct 2021 11:03:50 -0400	[thread overview]
Message-ID: <20211026150350.GA5136@localhost> (raw)
In-Reply-To: <20210801234509.18774-1-ezequiel@collabora.com>

On Sun 2021-08-01 @ 08:45:02 PM, Ezequiel Garcia wrote:
> Hi Richard, and everyone else:
> 
> Browsing the internet for "JFFS2 mtd" results in tutorials, articles
> and github.gists0 that point to mtdblock.
> 
> In fact, even the MTD wiki mentions that JFFS2
> needs mtdblock to mount a rootfs:
> 
>   http://www.linux-mtd.infradead.org/faq/jffs2.html
> 
> Moreover, I suspect there may be lots of users
> that still believe mtdblock is somehow needed to
> mount SquashFS.
> 
> I've taken a verbose route and added a pr_warn
> warning if the devices are NAND. I don't think using
> NAND without UBI is too wise, and given the amount
> of outdated tutorials I believe some advertising
> will help.

Not all NAND partitions on a device will contain linux root filesystems. For a
linux root filesystem perhaps using UBI/UBIFS is preferred, yet these messages
print out for each and every NAND partition:

	[    0.900827] Creating 8 MTD partitions on "nxp_lpc3220_slc":
	[    0.906431] 0x000000000000-0x000000020000 : "bootrom"
	[    0.913523] mtdblock: MTD device 'bootrom' is NAND, please consider using UBI block devices instead.
	[    0.933334] 0x000000020000-0x000000080000 : "uboot"
	[    0.940439] mtdblock: MTD device 'uboot' is NAND, please consider using UBI block devices instead.
	[    0.963322] 0x000000080000-0x000000440000 : "fbkernel"
	[    0.970655] mtdblock: MTD device 'fbkernel' is NAND, please consider using UBI block devices instead.
	[    0.993361] 0x000000440000-0x000000920000 : "fbrootfs"
	[    1.000725] mtdblock: MTD device 'fbrootfs' is NAND, please consider using UBI block devices instead.
	[    1.023315] 0x000000920000-0x000000ce0000 : "c_kernel"
	[    1.030722] mtdblock: MTD device 'c_kernel' is NAND, please consider using UBI block devices instead.
	[    1.053444] 0x000000ce0000-0x000000d00000 : "c__atags"
	[    1.060742] mtdblock: MTD device 'c__atags' is NAND, please consider using UBI block devices instead.
	[    1.083349] 0x000000d00000-0x000001000000 : "c_rootfs"
	[    1.090702] mtdblock: MTD device 'c_rootfs' is NAND, please consider using UBI block devices instead.
	[    1.113335] 0x000001000000-0x000020000000 : "mender"
	[    1.131627] mtdblock: MTD device 'mender' is NAND, please consider using UBI block devices instead.

NAND tends to be something found on older devices, the firmware/bootloaders
of older devices couldn't possibly understand UBI/UBIFS so many of these
partitions need be "raw" partitions, or use something that predates UBI.

Ironically my "mender" partition contains a UBI (with multiple UBIFSes inside)
yet I got the same "please use UBI" message as all the others (lol)

I'm specifying my partitions in DT with:

partitions {
        compatible = "fixed-partitions";
        #address-cells = <1>;
        #size-cells = <1>;

        mtd0@0       { label = "bootrom";   reg = <0x00000000 0x00020000>; };
        mtd1@20000   { label = "uboot";     reg = <0x00020000 0x00060000>; };
        mtd2@80000   { label = "fbkernel";  reg = <0x00080000 0x003c0000>; };
        mtd3@440000  { label = "fbrootfs";  reg = <0x00440000 0x004e0000>; };
        mtd4@920000  { label = "c_kernel";  reg = <0x00920000 0x003c0000>; };
        mtd5@ce0000  { label = "c__atags";  reg = <0x00ce0000 0x00020000>; };
        mtd6@d00000  { label = "c_rootfs";  reg = <0x00d00000 0x00300000>; };
        mtd7@1000000 { label = "mender";    reg = <0x01000000 0x1f000000>; };
};

which is why, I assume, I'm getting these messages. Is there a UBI-friendly
way to define them to avoid these messages?

Best regards,
	Trevor

  parent reply	other threads:[~2021-10-26 15:04 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-01 23:45 Ezequiel Garcia
2021-08-01 23:45 ` [PATCH 1/3] mtdblock: Update old JFFS2 mention in Kconfig Ezequiel Garcia
2021-08-01 23:45 ` [PATCH 2/3] mtdblock: Add comment about UBI block devices Ezequiel Garcia
2021-08-01 23:45 ` [PATCH 3/3] mtdblock: Warn if the added for a NAND device Ezequiel Garcia
2021-08-01 23:45 ` [PATCH 0/3] mtdblock: Advertise about UBI and UBI block Ezequiel Garcia
2021-08-01 23:45 ` [PATCH 1/3] mtdblock: Update old JFFS2 mention in Kconfig Ezequiel Garcia
2021-08-06 20:05   ` Miquel Raynal
2021-08-01 23:45 ` [PATCH 2/3] mtdblock: Add comment about UBI block devices Ezequiel Garcia
2021-08-06 20:05   ` Miquel Raynal
2021-08-01 23:45 ` [PATCH 3/3] mtdblock: Warn if the added for a NAND device Ezequiel Garcia
2021-08-06 20:05   ` Miquel Raynal
2021-08-17 16:27     ` Ezequiel Garcia
2021-08-17 16:49       ` Miquel Raynal
2021-10-26 15:03 ` Trevor Woerner [this message]
2021-10-26 19:01   ` [PATCH 0/3] mtdblock: Advertise about UBI and UBI block Richard Weinberger
2021-10-28 13:31     ` Trevor Woerner
2021-11-09 10:55       ` Miquel Raynal
2021-11-09 11:45       ` Daniel Golle
2021-11-12 13:54   ` Ezequiel Garcia
2022-01-20  9:39     ` Miquel Raynal
2022-01-20 10:26       ` Ezequiel Garcia
2022-01-20 11:22         ` Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211026150350.GA5136@localhost \
    --to=twoerner@gmail.com \
    --cc=ezequiel@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    --subject='Re: [PATCH 0/3] mtdblock: Advertise about UBI and UBI block' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).