LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mathias Nyman <mathias.nyman@intel.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	<linux-usb@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 3/3] arm64: dts: mediatek: Add USB xHCI controller for mt8195
Date: Tue, 2 Nov 2021 14:00:49 +0800	[thread overview]
Message-ID: <20211102060049.1843-3-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <20211102060049.1843-1-chunfeng.yun@mediatek.com>

Add all four USB xHCI controllers for MT8195

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 79 ++++++++++++++++++++++++
 1 file changed, 79 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index a59c0e9d1fc2..263eebfd2ea1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/mt8195-clk.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
 #include <dt-bindings/power/mt8195-power.h>
 
 / {
@@ -823,6 +824,26 @@
 			status = "disabled";
 		};
 
+		xhci0: usb@11200000 {
+			compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x11200000 0 0x1000>, <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>,
+				 <&topckgen CLK_TOP_SSUSB_REF>,
+				 <&apmixedsys CLK_APMIXED_USB1PLL>;
+			clock-names = "sys_ck", "xhci_ck", "ref_ck", "mcu_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 103>;
+			wakeup-source;
+			status = "disabled";
+		};
+
 		mmc0: mmc@11230000 {
 			compatible = "mediatek,mt8195-mmc", "mediatek,mt8192-mmc";
 			reg = <0 0x11230000 0 0x10000>,
@@ -843,6 +864,64 @@
 			status = "disabled";
 		};
 
+		xhci1: usb@11290000 {
+			compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x11290000 0 0x1000>, <0 0x11293e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port1 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_1P>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_1P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_1P_BUS>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_1P_XHCI>,
+				 <&topckgen CLK_TOP_SSUSB_P1_REF>,
+				 <&apmixedsys CLK_APMIXED_USB1PLL>;
+			clock-names = "sys_ck", "xhci_ck", "ref_ck", "mcu_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 104>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		xhci2: usb@112a0000 {
+			compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x112a0000 0 0x1000>, <0 0x112a3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port2 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_2P>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_2P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>,
+				 <&topckgen CLK_TOP_SSUSB_P2_REF>;
+			clock-names = "sys_ck", "xhci_ck", "ref_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 105>;
+			status = "disabled";
+		};
+
+		xhci3: usb@112b0000 {
+			compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x112b0000 0 0x1000>, <0 0x112b3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port3 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_3P>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_3P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>,
+				 <&topckgen CLK_TOP_SSUSB_P3_REF>;
+			clock-names = "sys_ck", "xhci_ck", "ref_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 106>;
+			wakeup-source;
+			usb2-lpm-disable;
+			status = "disabled";
+		};
+
 		nor_flash: nor@1132c000 {
 			compatible = "mediatek,mt8195-nor", "mediatek,mt8173-nor";
 			reg = <0 0x1132c000 0 0x1000>;
-- 
2.18.0


  parent reply	other threads:[~2021-11-02  6:01 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-02  6:00 [PATCH 1/3] dt-bindings: usb: mtk-xhci: add support ip-sleep " Chunfeng Yun
2021-11-02  6:00 ` [PATCH 2/3] usb: xhci-mtk: add support ip-sleep wakeup " Chunfeng Yun
2021-11-17 15:39   ` Matthias Brugger
2021-11-26 10:31   ` AngeloGioacchino Del Regno
2021-11-02  6:00 ` Chunfeng Yun [this message]
2021-11-17 15:40   ` [PATCH 3/3] arm64: dts: mediatek: Add USB xHCI controller " Matthias Brugger
2021-11-26 10:36   ` AngeloGioacchino Del Regno
2021-12-10  6:33     ` Chunfeng Yun
2021-11-12 16:57 ` [PATCH 1/3] dt-bindings: usb: mtk-xhci: add support ip-sleep " Rob Herring
2021-11-13  7:27   ` Chunfeng Yun
2021-11-26 10:31 ` AngeloGioacchino Del Regno

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211102060049.1843-3-chunfeng.yun@mediatek.com \
    --to=chunfeng.yun@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@intel.com \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH 3/3] arm64: dts: mediatek: Add USB xHCI controller for mt8195' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).