LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert@linux-m68k.org>
To: YC Hung <yc.hung@mediatek.com>,
	Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Ranjani Sridharan <ranjani.sridharan@linux.intel.com>,
	Kai Vehmanen <kai.vehmanen@linux.intel.com>,
	Daniel Baluta <daniel.baluta@nxp.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>,
	Matthias Brugger <matthias.bgg@gmail.com>
Cc: sound-open-firmware@alsa-project.org,
	alsa-devel@alsa-project.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
	Geert Uytterhoeven <geert@linux-m68k.org>
Subject: [PATCH] ASoC: SOF: mediatek: Use %pR/%pa to print resources/physical addresses
Date: Tue, 23 Nov 2021 11:30:13 +0100	[thread overview]
Message-ID: <20211123103013.73645-1-geert@linux-m68k.org> (raw)

On 32-bit with CONFIG_ARCH_DMA_ADDR_T_64BIT=n:

    sound/soc/sof/mediatek/mt8195/mt8195.c: In function ‘platform_parse_resource’:
    sound/soc/sof/mediatek/mt8195/mt8195.c:51:15: error: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 4 has type ‘unsigned int’ [-Werror=format=]
       51 |  dev_dbg(dev, "DMA pbase=0x%llx, size=0x%llx\n",
	  |               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    sound/soc/sof/mediatek/mt8195/mt8195.c: In function ‘adsp_memory_remap_init’:
    sound/soc/sof/mediatek/mt8195/mt8195.c:167:15: error: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 4 has type ‘phys_addr_t’ {aka ‘unsigned int’} [-Werror=format=]
      167 |  dev_dbg(dev, "adsp->pa_dram %llx, offset %#x\n", adsp->pa_dram, offset);
	  |               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    sound/soc/sof/mediatek/mt8195/mt8195.c: In function ‘adsp_shared_base_ioremap’:
    sound/soc/sof/mediatek/mt8195/mt8195.c:196:15: error: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 5 has type ‘phys_addr_t’ {aka ‘unsigned int’} [-Werror=format=]
      196 |  dev_dbg(dev, "shared-dram vbase=%p, phy addr :%llx,  size=%#x\n",
	  |               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fix the first cases by printing the full resource using %pR.
Fix the other cases by printing the physical addresses using %pa.

Reported-by: noreply@ellerman.id.au
Fixes: 32d7e03d26fd9318 ("ASoC: SOF: mediatek: Add mt8195 hardware support")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 sound/soc/sof/mediatek/mt8195/mt8195.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/sound/soc/sof/mediatek/mt8195/mt8195.c b/sound/soc/sof/mediatek/mt8195/mt8195.c
index 40e5a25875a6a93c..b1580b6ac8e19e61 100644
--- a/sound/soc/sof/mediatek/mt8195/mt8195.c
+++ b/sound/soc/sof/mediatek/mt8195/mt8195.c
@@ -48,8 +48,7 @@ static int platform_parse_resource(struct platform_device *pdev, void *data)
 		return ret;
 	}
 
-	dev_dbg(dev, "DMA pbase=0x%llx, size=0x%llx\n",
-		(phys_addr_t)res.start, resource_size(&res));
+	dev_dbg(dev, "DMA %pR\n", &res);
 
 	ret = of_reserved_mem_device_init(dev);
 	if (ret) {
@@ -164,7 +163,7 @@ static int adsp_memory_remap_init(struct device *dev, struct mtk_adsp_chip_info
 	offset = adsp->pa_dram - DRAM_PHYS_BASE_FROM_DSP_VIEW;
 	adsp->dram_offset = offset;
 	offset >>= DRAM_REMAP_SHIFT;
-	dev_dbg(dev, "adsp->pa_dram %llx, offset %#x\n", adsp->pa_dram, offset);
+	dev_dbg(dev, "adsp->pa_dram %pa, offset %#x\n", &adsp->pa_dram, offset);
 	writel(offset, vaddr_emi_map);
 	if (offset != readl(vaddr_emi_map)) {
 		dev_err(dev, "write emi map fail : %#x\n", readl(vaddr_emi_map));
@@ -193,8 +192,8 @@ static int adsp_shared_base_ioremap(struct platform_device *pdev, void *data)
 			return -ENOMEM;
 		}
 	}
-	dev_dbg(dev, "shared-dram vbase=%p, phy addr :%llx,  size=%#x\n",
-		adsp->shared_dram, adsp->pa_shared_dram, shared_size);
+	dev_dbg(dev, "shared-dram vbase=%p, phy addr :%pa,  size=%#x\n",
+		adsp->shared_dram, &adsp->pa_shared_dram, shared_size);
 
 	return 0;
 }
-- 
2.25.1


             reply	other threads:[~2021-11-23 10:30 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-23 10:30 Geert Uytterhoeven [this message]
2021-11-27  1:29 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211123103013.73645-1-geert@linux-m68k.org \
    --to=geert@linux-m68k.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=daniel.baluta@nxp.com \
    --cc=kai.vehmanen@linux.intel.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=perex@perex.cz \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=ranjani.sridharan@linux.intel.com \
    --cc=sound-open-firmware@alsa-project.org \
    --cc=tiwai@suse.com \
    --cc=yc.hung@mediatek.com \
    --subject='Re: [PATCH] ASoC: SOF: mediatek: Use %pR/%pa to print resources/physical addresses' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).