LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Lai Jiangshan <jiangshanlai@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: x86@kernel.org, Lai Jiangshan <laijs@linux.alibaba.com>,
	Andy Lutomirski <luto@kernel.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
	Dave Hansen <dave.hansen@linux.intel.com>,
	"H. Peter Anvin" <hpa@zytor.com>
Subject: [PATCH V6 47/49] x86/entry: Remove the unused ASM macros
Date: Fri, 26 Nov 2021 18:12:07 +0800	[thread overview]
Message-ID: <20211126101209.8613-48-jiangshanlai@gmail.com> (raw)
In-Reply-To: <20211126101209.8613-1-jiangshanlai@gmail.com>

From: Lai Jiangshan <laijs@linux.alibaba.com>

They are implemented and used in C code.  The ASM version is not needed
any more.

FENCE_SWAPGS_USER_ENTRY is not removed because it is still being used
in the nmi userspace path.  It could be possible to be removed in
future entry code enhancement.

Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
---
 arch/x86/entry/calling.h | 99 ----------------------------------------
 1 file changed, 99 deletions(-)

diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h
index 9065c31d2875..d42012fc694d 100644
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -210,53 +210,6 @@ For 32-bit we have the following conventions - kernel is built with
 	popq	%rax
 .endm
 
-.macro SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg:req save_reg:req
-	ALTERNATIVE "jmp .Ldone_\@", "", X86_FEATURE_PTI
-	movq	%cr3, \scratch_reg
-	movq	\scratch_reg, \save_reg
-	/*
-	 * Test the user pagetable bit. If set, then the user page tables
-	 * are active. If clear CR3 already has the kernel page table
-	 * active.
-	 */
-	bt	$PTI_USER_PGTABLE_BIT, \scratch_reg
-	jnc	.Ldone_\@
-
-	ADJUST_KERNEL_CR3 \scratch_reg
-	movq	\scratch_reg, %cr3
-
-.Ldone_\@:
-.endm
-
-.macro RESTORE_CR3 scratch_reg:req save_reg:req
-	ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
-
-	/* No need to restore when the saved CR3 is kernel CR3. */
-	bt	$PTI_USER_PGTABLE_BIT, \save_reg
-	jnc	.Lend_\@
-
-	ALTERNATIVE "jmp .Lwrcr3_\@", "", X86_FEATURE_PCID
-
-	/*
-	 * Check if there's a pending flush for the user ASID we're
-	 * about to set.
-	 */
-	movq	\save_reg, \scratch_reg
-	andq	$(0x7FF), \scratch_reg
-	bt	\scratch_reg, THIS_CPU_user_pcid_flush_mask
-	jnc	.Lnoflush_\@
-
-	btr	\scratch_reg, THIS_CPU_user_pcid_flush_mask
-	jmp	.Lwrcr3_\@
-
-.Lnoflush_\@:
-	SET_NOFLUSH_BIT \save_reg
-
-.Lwrcr3_\@:
-	movq	\save_reg, %cr3
-.Lend_\@:
-.endm
-
 #else /* CONFIG_PAGE_TABLE_ISOLATION=n: */
 
 .macro SWITCH_TO_KERNEL_CR3 scratch_reg:req
@@ -265,10 +218,6 @@ For 32-bit we have the following conventions - kernel is built with
 .endm
 .macro SWITCH_TO_USER_CR3_STACK scratch_reg:req
 .endm
-.macro SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg:req save_reg:req
-.endm
-.macro RESTORE_CR3 scratch_reg:req save_reg:req
-.endm
 
 #endif
 
@@ -277,17 +226,10 @@ For 32-bit we have the following conventions - kernel is built with
  *
  * FENCE_SWAPGS_USER_ENTRY is used in the user entry swapgs code path, to
  * prevent a speculative swapgs when coming from kernel space.
- *
- * FENCE_SWAPGS_KERNEL_ENTRY is used in the kernel entry non-swapgs code path,
- * to prevent the swapgs from getting speculatively skipped when coming from
- * user space.
  */
 .macro FENCE_SWAPGS_USER_ENTRY
 	ALTERNATIVE "", "lfence", X86_FEATURE_FENCE_SWAPGS_USER
 .endm
-.macro FENCE_SWAPGS_KERNEL_ENTRY
-	ALTERNATIVE "", "lfence", X86_FEATURE_FENCE_SWAPGS_KERNEL
-.endm
 
 .macro STACKLEAK_ERASE_NOCLOBBER
 #ifdef CONFIG_GCC_PLUGIN_STACKLEAK
@@ -297,12 +239,6 @@ For 32-bit we have the following conventions - kernel is built with
 #endif
 .endm
 
-.macro SAVE_AND_SET_GSBASE scratch_reg:req save_reg:req
-	rdgsbase \save_reg
-	GET_PERCPU_BASE \scratch_reg
-	wrgsbase \scratch_reg
-.endm
-
 #else /* CONFIG_X86_64 */
 # undef		UNWIND_HINT_IRET_REGS
 # define	UNWIND_HINT_IRET_REGS
@@ -313,38 +249,3 @@ For 32-bit we have the following conventions - kernel is built with
 	call stackleak_erase
 #endif
 .endm
-
-#ifdef CONFIG_SMP
-
-/*
- * CPU/node NR is loaded from the limit (size) field of a special segment
- * descriptor entry in GDT.
- */
-.macro LOAD_CPU_AND_NODE_SEG_LIMIT reg:req
-	movq	$__CPUNODE_SEG, \reg
-	lsl	\reg, \reg
-.endm
-
-/*
- * Fetch the per-CPU GSBASE value for this processor and put it in @reg.
- * We normally use %gs for accessing per-CPU data, but we are setting up
- * %gs here and obviously can not use %gs itself to access per-CPU data.
- *
- * Do not use RDPID, because KVM loads guest's TSC_AUX on vm-entry and
- * may not restore the host's value until the CPU returns to userspace.
- * Thus the kernel would consume a guest's TSC_AUX if an NMI arrives
- * while running KVM's run loop.
- */
-.macro GET_PERCPU_BASE reg:req
-	LOAD_CPU_AND_NODE_SEG_LIMIT \reg
-	andq	$VDSO_CPUNODE_MASK, \reg
-	movq	__per_cpu_offset(, \reg, 8), \reg
-.endm
-
-#else
-
-.macro GET_PERCPU_BASE reg:req
-	movq	pcpu_unit_offsets(%rip), \reg
-.endm
-
-#endif /* CONFIG_SMP */
-- 
2.19.1.6.gb485710b


  parent reply	other threads:[~2021-11-26 10:29 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-26 10:11 [PATCH V6 00/49] x86/entry/64: Convert a bunch of ASM entry code into C code Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 01/49] x86/entry: Add fence for kernel entry swapgs in paranoid_entry() Lai Jiangshan
2021-12-04 11:45   ` [tip: x86/urgent] x86/entry: Add a fence for kernel entry SWAPGS " tip-bot2 for Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 02/49] x86/entry: Use the correct fence macro after swapgs in kernel CR3 Lai Jiangshan
2021-12-04 11:45   ` [tip: x86/urgent] " tip-bot2 for Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 03/49] x86/xen: Add xenpv_restore_regs_and_return_to_usermode() Lai Jiangshan
2021-12-04 11:45   ` [tip: x86/urgent] " tip-bot2 for Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 04/49] x86/entry: Use swapgs and native_iret directly in swapgs_restore_regs_and_return_to_usermode Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 05/49] compiler_types.h: Add __noinstr_section() for noinstr Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 06/49] x86/entry: Introduce __entry_text for entry code written in C Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 07/49] x86/entry: Move PTI_USER_* to arch/x86/include/asm/processor-flags.h Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 08/49] x86: Remove unused kernel_to_user_p4dp() and user_to_kernel_p4dp() Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 09/49] x86: Replace PTI_PGTABLE_SWITCH_BIT with PTI_USER_PGTABLE_BIT Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 10/49] x86: Mark __native_read_cr3() & native_write_cr3() as __always_inline Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 11/49] x86/traps: Move the declaration of native_irq_return_iret into proto.h Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 12/49] x86/entry: Add arch/x86/entry/entry64.c for C entry code Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 13/49] x86/entry: Expose the address of .Lgs_change to entry64.c Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 14/49] x86/entry: Add C verion of SWITCH_TO_KERNEL_CR3 as switch_to_kernel_cr3() Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 15/49] x86/traps: Add fence_swapgs_{user,kernel}_entry() Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 16/49] x86/entry: Add C user_entry_swapgs_and_fence() Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 17/49] x86/traps: Move pt_regs only in fixup_bad_iret() Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 18/49] x86/entry: Switch the stack after error_entry() returns Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 19/49] x86/entry: move PUSH_AND_CLEAR_REGS out of error_entry Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 20/49] x86/entry: Move cld to the start of idtentry Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 21/49] x86/entry: Don't call error_entry for XENPV Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 22/49] x86/entry: Convert SWAPGS to swapgs in error_entry() Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 23/49] x86/entry: Implement the whole error_entry() as C code Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 24/49] x86/entry: Use idtentry macro for entry_INT80_compat Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 25/49] x86/entry: Convert SWAPGS to swapgs in entry_SYSENTER_compat() Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 26/49] x86: Remove the definition of SWAPGS Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 27/49] x86/entry: Make paranoid_exit() callable Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 28/49] x86/entry: Call paranoid_exit() in asm_exc_nmi() Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 29/49] x86/entry: move PUSH_AND_CLEAR_REGS out of paranoid_entry Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 30/49] x86/entry: Add the C version ist_switch_to_kernel_cr3() Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 31/49] x86/entry: Skip CR3 write when the saved CR3 is kernel CR3 in RESTORE_CR3 Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 32/49] x86/entry: Add the C version ist_restore_cr3() Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 33/49] x86/entry: Add the C version get_percpu_base() Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 34/49] x86/entry: Add the C version ist_switch_to_kernel_gsbase() Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 35/49] x86/entry: Implement the C version ist_paranoid_entry() Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 36/49] x86/entry: Implement the C version ist_paranoid_exit() Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 37/49] x86/entry: Add a C macro to define the function body for IST in .entry.text Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 38/49] x86/debug, mce: Use C entry code Lai Jiangshan
2021-11-26 10:11 ` [PATCH V6 39/49] x86/idtentry.h: Move the definitions *IDTENTRY_{MCE|DEBUG}* up Lai Jiangshan
2021-11-26 10:12 ` [PATCH V6 40/49] x86/nmi: Use DEFINE_IDTENTRY_NMI for nmi Lai Jiangshan
2021-11-26 10:12 ` [PATCH V6 41/49] x86/nmi: Use C entry code Lai Jiangshan
2021-11-26 10:12 ` [PATCH V6 42/49] x86/entry: Add a C macro to define the function body for IST in .entry.text with an error code Lai Jiangshan
2021-11-26 10:12 ` [PATCH V6 43/49] x86/doublefault: Use C entry code Lai Jiangshan
2021-11-26 10:12 ` [PATCH V6 44/49] x86/sev: Add and use ist_vc_switch_off_ist() Lai Jiangshan
2021-11-26 10:12 ` [PATCH V6 45/49] x86/sev: Use C entry code Lai Jiangshan
2021-11-26 10:12 ` [PATCH V6 46/49] x86/entry: Remove ASM function paranoid_entry() and paranoid_exit() Lai Jiangshan
2021-11-26 10:12 ` Lai Jiangshan [this message]
2021-11-26 10:12 ` [PATCH V6 48/49] x86/entry: Remove save_ret from PUSH_AND_CLEAR_REGS Lai Jiangshan
2021-11-26 10:12 ` [PATCH V6 49/49] x86/syscall/64: Move the checking for sysret to C code Lai Jiangshan
2021-11-27 17:46 ` [PATCH V6 00/49] x86/entry/64: Convert a bunch of ASM entry code into " Damian Tometzki
2021-12-03  9:31 ` Lai Jiangshan
2021-12-03  9:39   ` Borislav Petkov
2021-12-03 10:10     ` Lai Jiangshan
2021-12-03 10:18       ` Borislav Petkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211126101209.8613-48-jiangshanlai@gmail.com \
    --to=jiangshanlai@gmail.com \
    --cc=bp@alien8.de \
    --cc=dave.hansen@linux.intel.com \
    --cc=hpa@zytor.com \
    --cc=laijs@linux.alibaba.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luto@kernel.org \
    --cc=mingo@redhat.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    --subject='Re: [PATCH V6 47/49] x86/entry: Remove the unused ASM macros' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).