LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Horatiu Vultur <horatiu.vultur@microchip.com>
To: Rob Herring <robh@kernel.org>
Cc: <davem@davemloft.net>, <kuba@kernel.org>,
	<UNGLinuxDriver@microchip.com>, <p.zabel@pengutronix.de>,
	<linux@armlinux.org.uk>, <andrew@lunn.ch>,
	<netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH net-next v4 1/6] dt-bindings: net: lan966x: Add lan966x-switch bindings
Date: Mon, 29 Nov 2021 11:55:37 +0100	[thread overview]
Message-ID: <20211129105537.p3elvh5bztyhner2@soft-dev3-1.localhost> (raw)
In-Reply-To: <YaQTWG6g8nNP7GGX@robh.at.kernel.org>

The 11/28/2021 17:40, Rob Herring wrote:

Hi Rob,

> 
> On Fri, Nov 26, 2021 at 10:05:35AM +0100, Horatiu Vultur wrote:
> > Document the lan966x switch device driver bindings
> >
> > Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
> > ---
> >  .../net/microchip,lan966x-switch.yaml         | 149 ++++++++++++++++++
> >  1 file changed, 149 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml
> > new file mode 100644
> > index 000000000000..9367491dd2d5
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml
> > @@ -0,0 +1,149 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/microchip,lan966x-switch.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Microchip Lan966x Ethernet switch controller
> > +
> > +maintainers:
> > +  - Horatiu Vultur <horatiu.vultur@microchip.com>
> > +
> > +description: |
> > +  The lan966x switch is a multi-port Gigabit AVB/TSN Ethernet Switch with
> > +  two integrated 10/100/1000Base-T PHYs. In addition to the integrated PHYs,
> > +  it supports up to 2RGMII/RMII, up to 3BASE-X/SERDES/2.5GBASE-X and up to
> > +  2 Quad-SGMII/Quad-USGMII interfaces.
> > +
> > +properties:
> > +  $nodename:
> > +    pattern: "^switch@[0-9a-f]+$"
> > +
> > +  compatible:
> > +    const: microchip,lan966x-switch
> > +
> > +  reg:
> > +    items:
> > +      - description: cpu target
> > +      - description: general control block target
> > +
> > +  reg-names:
> > +    items:
> > +      - const: cpu
> > +      - const: gcb
> > +
> > +  interrupts:
> > +    minItems: 1
> > +    items:
> > +      - description: register based extraction
> > +      - description: frame dma based extraction
> > +
> > +  interrupt-names:
> > +    minItems: 1
> > +    items:
> > +      - const: xtr
> > +      - const: fdma
> > +
> > +  resets:
> > +    items:
> > +      - description: Reset controller used for switch core reset (soft reset)
> > +      - description: Reset controller used for releasing the phy from reset
> > +
> > +  reset-names:
> > +    items:
> > +      - const: switch
> > +      - const: phy
> > +
> > +  ethernet-ports:
> > +    type: object
> > +    patternProperties:
> > +      "^port@[0-9a-f]+$":
> > +        type: object
> 
> This needs a reference to ethernet-controller.yaml so that all the
> properties have a type applied.
> 
> See dsa.yaml for an example.

Yes, I will do that in the next version.

> 
> > +
> > +        properties:
> > +          '#address-cells':
> > +            const: 1
> > +          '#size-cells':
> > +            const: 0
> > +
> > +          reg:
> > +            description:
> > +              Switch port number
> > +
> > +          phys:
> > +            description:
> > +              Phandle of a Ethernet SerDes PHY
> > +
> > +          phy-mode:
> > +            description:
> > +              This specifies the interface used by the Ethernet SerDes towards
> > +              the PHY or SFP.
> 
> Presumably only some subset of all defined modes are possible on this
> h/w?

That is correct, I will add an enum with the supported modes. Something
like in ethernet-controller.yaml.

> 
> > +
> > +          phy-handle:
> > +            description:
> > +              Phandle of a Ethernet PHY.
> > +
> > +          sfp:
> > +            description:
> > +              Phandle of an SFP.
> > +
> > +          managed: true
> > +
> > +        required:
> > +          - reg
> > +          - phys
> > +          - phy-mode
> > +
> > +        oneOf:
> > +          - required:
> > +              - phy-handle
> > +          - required:
> > +              - sfp
> > +              - managed
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - reg-names
> > +  - interrupts
> > +  - interrupt-names
> > +  - resets
> > +  - reset-names
> > +  - ethernet-ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    switch: switch@e0000000 {
> > +      compatible = "microchip,lan966x-switch";
> > +      reg =  <0xe0000000 0x0100000>,
> > +             <0xe2000000 0x0800000>;
> > +      reg-names = "cpu", "gcb";
> > +      interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
> > +      interrupt-names = "xtr";
> > +      resets = <&switch_reset 0>, <&phy_reset 0>;
> > +      reset-names = "switch", "phy";
> > +      ethernet-ports {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        port0: port@0 {
> > +          reg = <0>;
> > +          phy-handle = <&phy0>;
> > +          phys = <&serdes 0 0>;
> > +          phy-mode = "gmii";
> > +        };
> > +
> > +        port1: port@1 {
> > +          reg = <1>;
> > +          sfp = <&sfp_eth1>;
> > +          managed = "in-band-status";
> > +          phys = <&serdes 2 4>;
> > +          phy-mode = "sgmii";
> > +        };
> > +      };
> > +    };
> > +
> > +...
> > --
> > 2.33.0
> >
> >

-- 
/Horatiu

  reply	other threads:[~2021-11-29 10:55 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-26  9:05 [PATCH net-next v4 0/6] net: lan966x: Add lan966x switch driver Horatiu Vultur
2021-11-26  9:05 ` [PATCH net-next v4 1/6] dt-bindings: net: lan966x: Add lan966x-switch bindings Horatiu Vultur
2021-11-28 23:40   ` Rob Herring
2021-11-29 10:55     ` Horatiu Vultur [this message]
2021-11-26  9:05 ` [PATCH net-next v4 2/6] net: lan966x: add the basic lan966x driver Horatiu Vultur
2021-11-26 10:19   ` Philipp Zabel
2021-11-26  9:05 ` [PATCH net-next v4 3/6] net: lan966x: add port module support Horatiu Vultur
2021-11-26 11:04   ` Russell King (Oracle)
2021-11-29 11:08     ` Horatiu Vultur
2021-11-26 18:12   ` Jakub Kicinski
2021-11-29 10:59     ` Horatiu Vultur
2021-11-26  9:05 ` [PATCH net-next v4 4/6] net: lan966x: add mactable support Horatiu Vultur
2021-11-26  9:05 ` [PATCH net-next v4 5/6] net: lan966x: add ethtool configuration and statistics Horatiu Vultur
2021-11-26  9:05 ` [PATCH net-next v4 6/6] net: lan966x: Update MAINTAINERS to include lan966x driver Horatiu Vultur

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211129105537.p3elvh5bztyhner2@soft-dev3-1.localhost \
    --to=horatiu.vultur@microchip.com \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=robh@kernel.org \
    --subject='Re: [PATCH net-next v4 1/6] dt-bindings: net: lan966x: Add lan966x-switch bindings' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).